Mitsubishi Electric MDT652S, BV013 User Manual

64.5" LCD Display Monitor

MODEL

Before use

- Please be sure to read the “Safety Precautions.” They are important to use this LCD display monitor.

- Please check the content of the package. This document contains instructions for World Wide model and Japan model, but
their accessories are different.

English-1

English

Features ................................................................................................................................................................................... English-2

Important Information .............................................................................................................................................................. English-3

Declaration ...............................................................................................................................................................................English-5

Safety Precautions, Maintenance & Recommended Use .......................................................................................................English-6

Contents ...................................................................................................................................................................................English-7

Parts Name and Functions ....................................................................................................................................................... English-8

Buttons, Switch, and Indicator ..................................................................................................................................English-8

Connectors and Terminals ........................................................................................................................................ English-9

Wireless Remote Control .......................................................................................................................................... English-10

How to Use the Wireless Remote Control ................................................................................................................ English-11

CAT5 Tx BOX .............................................................................................................................................................English-12

Preparation for use .................................................................................................................................................................. English-13

Flow of preparation ...................................................................................................................................................English-13

[P-1] Preparation for installation ............................................................................................................................................ English-14

Determine the installation location ............................................................................................................................English-14

Ventilation requirements for enclosure mounting .....................................................................................................English-14

[P-2] Installing the monitor ..................................................................................................................................................... English-15

Using the wall mount or ceiling mount ...................................................................................................................... English-15

Using the monitor without the bezel .........................................................................................................................English-15

Installing in the portrait position ................................................................................................................................English-16

[P-3] Installing the optional speakers .................................................................................................................................... English-17

[P-4] Connection procedure .................................................................................................................................................. English-18

Wiring diagram .......................................................................................................................................................... English-18

Prevention of disconnection of HDMI cable ............................................................................................................. English-18

Connecting with a computer (analog connection) ....................................................................................................English-19

Connecting with a computer (digital connection) ..................................................................................................... English-20

Connecting a video device (component video/HDMI device) ..................................................................................English-21

Connecting a video device (composite video/S video device)/stereo amplifi er ...................................................... English-22

[P-5] Connecting CAT5 ..........................................................................................................................................................English-23

CAT5 for long-distance connection or multiple-monitor connection ........................................................................ English-23

[P-6] Connecting RS-232C .................................................................................................................................................... English-25

Monitor control via RS-232C ..................................................................................................................................... English-25

[P-7] Connecting LAN ............................................................................................................................................................ English-26

Monitor connection using LAN ................................................................................................................................. English-26

[P-8] Connecting the power cord to the monitor .................................................................................................................. English-27

Connecting the power source ................................................................................................................................... English-27

How to Use ............................................................................................................................................................................... English-28

Flow of How to Using ................................................................................................................................................English-28

[U-1] Turning on all the connected devices ...........................................................................................................................English-29

Turning on external devices ......................................................................................................................................English-29

Turning on the monitor .............................................................................................................................................. English-29

Power Management Function ................................................................................................................................... English-29

[U-2] Selecting the video input .............................................................................................................................................. English-30

[U-3] Controlling the external devices ...................................................................................................................................English-31

[U-4] Selecting the OSD language ......................................................................................................................................... English-31

[U-5] Auto-setup .................................................................................................................................................................... English-32

[U-6] Selecting the picture mode ........................................................................................................................................... English-32

[U-7] Screen adjustment ........................................................................................................................................................ English-33

[U-8] Picture adjustment ........................................................................................................................................................ English-33

[U-9] Volume control ..............................................................................................................................................................

E

nglish-34

[U-10] Schedule setting ........................................................................................................................................................... English-34

How to set up schedule ............................................................................................................................................. English-35

[U-11] Remote control ..............................................................................................................................................................English-36

RS-232C/RS-485 Remote control ............................................................................................................................ English-36

LAN Remote control ..................................................................................................................................................English-38

Confi guration and basic operation of OSD screen ................................................................................................................. English-39

Confi guration of OSD screen .................................................................................................................................... English-39

Basic operation of OSD ............................................................................................................................................. English-40

OSD screen functions ..............................................................................................................................................................English-41

Other functions ........................................................................................................................................................................ English-51

Picture size ................................................................................................................................................................ English-51

Picture mode ............................................................................................................................................................. English-51

Audio input change ...................................................................................................................................................English-51

OSD information ........................................................................................................................................................English-51

Control Lock mode .................................................................................................................................................... English-51

Supplemental information of the auto brightness function .....................................................................................English-52

PIP, POP function ...................................................................................................................................................... English-53

Remote control numbering function ......................................................................................................................... English-54

Troubleshooting .......................................................................................................................................................................English-55

Specifi cations ..........................................................................................................................................................................English-56

Pin Assignment ........................................................................................................................................................................ English-57

Index

English-2

Features

Engineered Specially for Public Display Use with High
Durability and High-level Specifi cations

Panel Designed for Heavy Use Page 56

Highly durable LCD panel for commercial use.
A

b

le to keep displaying crisp, vivid images and endures harsh
environments of various public places such as airports and
stations.

High Brightness, High Contrast Page 56

High brightness of 700 cd/m

2

and high contrast ratio of 4000:1.

Offers brightness as high as 700 cd/m

2

for easy viewing in well­lit public places. A high contrast ratio of 4000:1 delivers sharp
images with clear black and white colors, allowing viewers to
read displayed information even from a distance.

Enhanced Display Functionality for Various Commercial
Use/

Support for System Confi guration Suitable for

Diversifi ed Applications
6-axis Color Adjustment Function Page 41

6-axis color adjustment function for adjusting specifi c

c

olors
only.
You can adjust total six colors of red, green, blue and three
medium colors independently to reproduce skin tones and
colors of company or brand logos accurately in signage
applications.

Digital Zoom Page 43

Zoom mode for expanding 4:3 image to 16:9.
V

a

rious zoom modes are provided and it is possible to expand
4:3 aspect ratio images to 16:9. In addition, you can select the
dynamic display mode to display naturally widened images
with different zooming rates around the screen center and
screen edges. You can also optimally change the image size
diagonally, horizontally, and vertically.

Tiling Capability with Frame compensation Page 49

Up to 25 panels (5 wide x 5 high) can be combined to create
a s

i

ngle large image (i.e., video wall) or other high-impact
signage. A frame compensation function is incorporated to
compensate the width of panel bezels so that images are
displayed with the utmost accuracy.

PiP, PoP and Side-by-side Pages 10, 45, and 53

Picture-in-Picture and Picture-out-of-Picture are available when
yo

u wa

nt to display video content from a video input source
in the sub picture and display the PC input source in the main
picture, and vice versa.
The native resolution as high as 1920 x 1080 can display
these two input sources in the Side-by-side mode, ideal for
broadcasting and video-conferencing applications.

Equipped with CAT5 Analog Signal Transmission Function/
Supports Max. 150-meter Cable

CAT5 Video Connection Pages 12 and 23

Transmitting analog video signal and control signal over a
single

C

AT5 cable.
You can transmit analog RGB video signal and display control
signal over a single CAT5 cable. Long-distance transmission up
to 150 meters allows fl exible installation of the monitors and the
personal computer.

Daisy-chain Connection (CAT5) Page 23

Linking up to 5 monitors.
Y

o

u can connect up to 5 monitors in a daisy-chain confi guration
using CAT5 cable (max. 200 meters). The monitors can be
installed away from each other depending on the usage.

Variable Management Functions Supporting Effi cient
Operation and Management

Programmable Scheduling Function Pages 34, 35, and 48

The monitor’s operating schedule can be programmed for
u

p

to seven different scheduled time intervals by time, day
of the week and input port. This allows video content from
different inputs to be displayed on certain monitors within the
same installation according to the schedule, and extends the
monitor’s life and saves the power by turning it off during those
hours or days it is not in use.

Screen-saver Functions Page 46

To reduce image persistence and maximize the panel life in
d

e

manding signage applications, this product is equipped with
four screen-saver functions.

• GAMMA

• COOLING FAN

• BRIGHTNESS

• MOTION

Power-on Delay Page 50

For installations employing numerous monitors, the power­o

n

delay function can power up the monitors sequentially with
delay between 2-50 seconds after the power is applied. Using
this function can prevent inrush current problems and reduce
the overall electrical load requirements when a single power
supply is used.

Brightness Compensation by the Ambient Light Sensors
for Enhanced Visibility and Lower Power Consumption

Ambient Light Sensors (Brightness sensors)

Pages 8 and 52

Automatic screen brightness adjustment for enhanced visibility
an

d lower power consumption.
The ambient light sensors on the front and rear of the monitor
detect not only the light refl ected on the front but also that on
the rear to automatically obtain optimum brightness. Besides,
the monitor adjusts its screen brightness according to the
brightness of the displayed images. The screen is always
easy to view in spite of brightness variation in the daytime and
nighttime.

Others
DisplayPort Pages 9 and 20

DisplayPort-compliant terminal is provided.
T

h

e monitor is equipped with a terminal supporting DisplayPort,
the digital interface standard. You can transmit video signals
over a single cable of max. 15 meters long.

Speakers Pages 9 and 17

Special optional speakers can be installed.
Th

e monitor is equipped with 7 W + 7 W speaker output
connectors, through which voice messages, etc. are output
clearly.

Remote Control Pages 10 and 11

Special wireless remote control supports major operations and
sett

ings.
The special wireless remote control is supplied for major
controls such as power-on/off, video source switching, and
various settings.

Closed Caption Page 50

You can display captions.
W

h

en closed-caption video signals are input, you can select to
display or hide the captions on the screen.
This monitor is compliant with EIA-608-A.

English-3

English

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc.
Address: 9351 Jeronimo Road,
Irvine, California 92618 U.S.A.
Tel. No.: +1 - [phone]

Type of Product: Computer Monitor
Equipment Classifi cation: Class B Peripheral
Model: MDT652S (BV013)

We hereby declare that the equipment specifi ed above

conforms to the technical standards as specifi ed in the FCC Rules.

Windows is a registered trademark of Microsoft Corporation.
HDMI, the HDMI logo, and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
The DisplayPort Icon is a trademark of the Video Electronics Standards Association, registered in the U.S. and other
countries.
All other brands and product names are trademarks or registered trademarks of their respective owners.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2

No. 60950-1.

FCC Information

1. Use the attached specifi ed cables with this equipment so as not to interfere with radio and television reception.
(1) The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,
(2) Please use the supplied shielded video signal cable. Use of other cables and adapters may cause interference with radio and

television reception.

2.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

3.

You are cautioned that changes or modifi cations not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.

Important Information

English-4

Important Information (continued)

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. Therefore, it should be read carefully in order to avoid any problems.

WARNING

CAUTION

CAUTION:

This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp may be
regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or
the Electronic Industries Alliance: www.eiae.org. (For US only).

CAUTION

English-5

English

We hereby certify that the color monitor MDT652S (BV013)
is in compliance with
Council Directive 2006/95/EC:
— EN 60950-1
Council Directive 2004/108/EC:
— EN 55022
— EN 61000-3-2
— EN 61000-3-3
— EN 55024

and marked with

Mitsubishi Electric Corporation

2-7-3, Marunouchi,

Chiyoda-Ku

Tokyo 100-8310, Japan

Declaration

Declaration of the Manufacturer

Declaration of the Manufacturer

Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and
Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and
components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the
battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!

Warning

This is a Class A product. In a domestic environment this product may cause radio interference, in which case the
user may be required to take adequate measures.

English-6

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE LCD COLOR MONITOR:

• DO NOT REMOVE MONITOR BACK COVER. There are

no user serviceable parts inside and opening or removing
covers may expose you to dangerous shock hazards or
other risks.

Refer all servicing to qualifi ed service personnel.

• Do not spill any liquids into the cabinet or use your monitor
near water.

• Do not insert objects of any kind into the cabinet slots,
as they may touch dangerous voltage points, which can
be harmful or fatal or may cause electric shock, fi re or
equipment failure.

• Do not place any heavy objects on the power cord.

Damage to the cord may cause shock or fi re.

• Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.

• When operating the LCD monitor with its AC 100-120 V
power supply in North America, use a power supply cord
provided with the monitor.

If a power cord is not supplied with this monitor, please

contact your supplier.

• When operating the LCD monitor with its AC 220-240 V
power supply in Europe, use a power supply cord provided
with the monitor.

If a power cord is not supplied with this monitor, please

contact your supplier.

• In UK, use a BS-approved power cord with molded plug
having a black (10 A) fuse installed for use with this monitor.

• When operating the LCD Monitor with a 220-240 V AC
power supply in Australia, use the power cord provided with
the monitor.

If a power cord is not supplied with this equipment, please

contact your supplier.

• For all other cases, use a power cord that matches the AC
voltage of the power outlet and has been approved by and
complies with the safety standard of your particular country.

• Do not place any objects onto the monitor and do not use
the monitor outdoors.

• The inside of the fl uorescent tube located within the LCD
monitor contains mercury. Please follow the bylaws or rules
of your municipality to dispose of the tube properly.

• Do not bend power cord.

• Do not use monitor in high temperature, humid, dusty, or
oily areas.

• If monitor or glass is broken, do not come in contact with
the liquid crystal and handle with care.

• If the LCD monitor is damaged and the liquid crystal leaks
out, do not inhale or swallow it.

• Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources.

Do not put anything on top of the monitor.

• The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.

• Handle with care when transporting. Save packaging for
transporting.

• Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.

• If using the cooling fan continuously, it’s recommended to
wipe holes a minimum of once a month.

• When installing the remote control batteries;

- Align the batteries according to the (+) and (-) indications

inside the case.

- Align the (-) indication of the batteries fi rst inside the

case.

CAUTION:

Immediately unplug your monitor from the wall outlet and refer
servicing to qualifi ed service personnel under the following
conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the
monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following
operating instructions.

Recommend Use
CAUTION:

• For optimum performance, allow 20 minutes for warm-up.

• Rest your eyes periodically by focusing on an object at least
5 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other
light sources to minimize glare and refl ections.

• Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness, contrast, and sharpness
controls to enhance readability.

• Avoid displaying fi xed patterns on the monitor for long
periods of time to avoid image persistence (after image
effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomic benefi ts, we recommend
the following:

• Use the preset Size and Position controls with standard
signals.

• Use the preset Color Setting.

• Use non-interlaced signals.

• Do not use primary color blue on a dark background, as
it is diffi cult to see and may produce eye fatigue due to
insuffi cient contrast.

Safety Precautions, Maintenance & Recommended Use

English-7

English

64.5" LCD Display Monitor

MODEL

Before use

- Please be sure to read the “Safety Precautions.” They are important to use this LCD display monitor.

- Please check the content of the package. This document contains instructions for World Wide model and Japan model, but

their accessories are different.

Contents



Power Cord

For EU



Video Signal Cable

(Mini D-SUB 15-pin to

Mini D-SUB 15-pin Cable)



Clamper x 3

(For securing the cables)



Label to cover the UL

certifi cation marking



Protective cover



Wireless Remote

Control and AAA

Batteries

Your LCD monitor (MDT652S) comes with the following:

* For the use in the other regions, use a power cord that

matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of those
regions or countries.

The following components are supplied as option.

• External Speakers



CAT5 Tx BOX



CD-ROM



Clamper x 2

(For preventing disconnection of

the power cord and HDMI cable)



LCD Monitor



Power Cord

For North America

* The supplied power cord varies depending on destination.



User’s Manual

English-8

5

INPUT button

Displays the OSD menu to switch the video input.
You can select [RGB1], [RGB2], [RGB3], [RGB4], [RGB5], [RGB6],
[DVD/HD], [VIDEO<S>], or [VIDEO] using the UP (

) or DOWN

(

) button.

6

PLUS (+) button

Acts as (+) button to increase the adjustment in the OSD menu.
Increases the audio output level when the OSD menu is off.

7

MINUS (-) button

Acts as (-) button to decrease the adjustment in the OSD menu.
Decreases the audio output level when the OSD menu is off.

8

UP ( ) button

Acts as button to move the highlighted area up to select an
adjustment item in the OSD menu.

9

DOWN ( ) button

Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu.

10

EXIT button

Activates the OSD menu when the OSD menu is off.
Acts as EXIT button to go back to the previous OSD menu.

11

Brightness sensor (on the front and rear)

Sensor for the auto brightness function.

(Reference) Control Lock mode

You can lock the operation buttons. See page 51.

1

Main Power Switch

Switches the main power on/off.

2

Remote control sensor and Power indicator

Remote control sensor: Receives the signal from the wireless

remote control.

Power indicator: Indicates the state of the LCD monitor.

• Steady green: The power is on.

• Steady red: The power is off.
Some operations such as power-on

are possible.

• Steady green and red: The LCD monitor is in the sleep
mode.

• Off: The main power is off.

• Steady red and blinking green: The LCD monitor is in the

schedule standby mode.

• Blinking red: The LCD monitor has an error
(detected by the self-diagnostic
function).

3

POWER button ( )

Switches the power on/off.
This button doesn’t work when the power indicator is off. Turn
on the main power. (See page 29.)

4

MUTE button

Switches the audio mute on/off.

Buttons, Switch, and Indicator

ON

OFF

Parts Name and Functions

NOTE:

For details about the OSD menu operation using the buttons, see “Basic operation of OSD.” (See page 40.)

Front

Control buttons

Rear

English-9

English

1

AC IN (3-pin, with earth terminal)

Connects with the supplied power cord.

2

EXTERNAL SPEAKER TERMINAL

Connects with the special stereo speakers (option).

3

LAN connector

Connects with a LAN cord.

4

RS-232C connector (D-SUB 9-pin)

IN connector:
Connects with the RS-232C OUT connector of a computer or
other connected MDT652S.
OUT connector:
Connects with the RS-232C IN connector of other connected
MDT652S.

5

AUDIO IN

Connects with the audio output connector of external
equipment such as a computer, VCR, and DVD player.
(a) AUDIO1: ø3.5 stereo mini-jack connector
(b) AUDIO2: RCA connector
(c) AUDIO3: RCA connector

6

AUDIO OUT (RCA)

Outputs the signal that is supplied to the selected AUDIO IN
connector. Connects with an external audio amplifi er, etc.

7

VIDEO INPUT/OUTPUT (BNC/S connector)

Connects with video equipment.
S VIDEO IN: S-video input connector (MINI DIN 4-pin)
VIDEO IN: BNC connector
VIDEO OUT: BNC connector

Connectors and Terminals

LR

RB

HV

G

Cr/Pr Cb/Pb

Y

IN IN

OUT

OUTIN

OUT

8

RGB6 IN (DisplayPort)

Connects with the digital video output of a computer, etc.

9

RGB1 IN (HDMI)

Connects with the digital video output of a computer, DVD
player, etc.

10

RGB OUT (MINI D-SUB 15-pin)

Outputs the signal that is supplied to the RGB3, RGB4, or
RGB5 IN connector.

11

RGB2 IN (DVI-D)

Connects with the digital video output of a computer, etc.

12

RGB3 IN (MINI D-SUB 15-pin)

Connects with the analog video output of a computer, etc.

13

RGB4 IN, DVD/HD IN (BNC)

Connects with the analog video output of a computer or the
component video output of a DVD player, etc.

14

RGB5, CAT5 INPUT/OUTPUT (Modular

connector 8-pin)

IN connector:
Connects with the CAT5 OUT connector of a CAT5 Tx BOX or
other connected MDT652S.
OUT connector:
Connects with the CAT5 IN connector of other connected
MDT652S.

Parts Name and Functions (continued)

Anti-theft lock slot

You can insert a Kensington
anti-theft lock key.

Main Power Switch

English-10

1

POWER button

Switches the power on/off.
* When the Power indicator is not glowing, no controls will

work.

2

INPUT buttons

Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),
[RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6]
(DISPLAY PORT), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO].

3

PICTURE MODE button

Selects the picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 32.
HIGHBRIGHT: The brightness is maximized.
STANDARD: Factory default setting.
sRGB: Suitable for color matching with sRGB-

compliant devices.

CINEMA: Suitable for viewing movies.

4

DISPLAY button

Displays the screen information. See page 51. When the remote
control mode is LOCK, you can set it back to NORMAL by
holding down the DISPLAY button for at least 5 seconds (see
page 49).

5

SET button

Accepts the settings made in the OSD menu.

6

MINUS button (-)

Acts as (-) button to decrease the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the left.

7

AUTO SETUP button

Displays the auto setup menu. See pages 32 and 46.

8

AUDIO INPUT buttons

Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3],
and [HDMI]. However, note that [VIDEO<S>] and [VIDEO] use
common settings. You can select [HDMI] only when the video
input source is [RGB1].

9

PIP (Picture-in-Picture) buttons

ON/OFF button: Switches the PIP or POP mode on/off.
INPUT button: Selects video to be displayed in the sub

picture.

CHANGE button: Changes the main picture with the sub

picture.

[Description]

PIP: Picture-in-Picture

The sub picture is displayed within the main picture.

POP: Picture-out-Picture

The sub picture is displayed to the bottom right of the main
picture.

SIDE BY SIDE

The main picture and the sub picture are displayed side by
side.

NOTE:

When the screen size is [CUSTOM] or [REAL], the PIP and POP
modes don’t work.

10

STILL button

ON/OFF button: Switches the still picture mode on/off.
CAPTURE button: Captures the new picture.

11

SIZE button

Selects the picture size from [FULL], [NORMAL], [CUSTOM],
[DYNAMIC], and [REAL]. See page 51.

12

MENU button

Switches the OSD menu mode on/off.

13

UP button ( )

Acts as button to move the highlighted area up to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture up.

14

PLUS button (+)

Acts as (+) button to increase the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the right.

15

EXIT button

Displays the previous OSD menu.

16

DOWN button ( )

Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture down.

17

MUTE button

Switches the mute function on/off.

18

VOLUME buttons (VOL)

Pressing the plus (+) side increases the audio output level.
Pressing the minus (-) side decreases the audio output level.

Parts Name and Functions (continued)

Wireless Remote Control

English-11

English

Operating Range of the Wireless Remote
Control

Point the wireless remote control toward the LCD monitor’s
remote control sensor during button operation.
Use the wireless remote control within a distance of about 7 m
from the front of the LCD monitor’s remote control sensor and
at a horizontal and vertical angle of within 30° within a distance
of about 3.5 m.

CAUTION:

The remote control system may not function when direct
sunlight or strong illumination strikes the remote control sensor
of the LCD monitor, or when there is an object in the path.

Handling the wireless remote control

* Do not subject to strong shock.
* Do not allow water or other liquid to splash on the wireless

remote control. If the wireless remote control gets wet, wipe

it dry immediately.
* Avoid exposure to heat and steam.
* Other than to install the batteries, do not open the wireless

remote control.

Parts Name and Functions (continued)

Installing and removing the Wireless
remote control batteries

The wireless remote control is powered by 1.5 V AAA batteries.

How to install the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Align the batteries according to the (+) and (-) indications
inside the case.

3. Replace the cover.

How to remove the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Remove the batteries.

CAUTION:

Incorrect use of batteries can result in leaks or explosion.
Be careful especially about the following points.

• Place “AAA” batteries matching the (+) and (-) signs on each
battery to the (+) and (-) signs of battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes
shorter battery life or leakage of batteries.

• Remove dead batteries immediately to prevent battery
liquid from leaking into the battery compartment. Don’t
touch exposed battery acid because it causes damage to
your skin.

NOTE:

If you do not use the wireless remote control for a long period,
remove the batteries.

How to Use the Wireless Remote Control

English-12

Parts Name and Functions (continued)

CAT5 Tx BOX

1

USB (B type)

Connector for receiving the power supplied from the USB
device such as the computer. By connecting a USB cable, you
can control the CAT5 Tx BOX using the control commands
transmitted over the USB cable.

CAUTION:

We have checked that the power is supplied and the control
commands are transmitted properly via the USB connector
by connecting it with our computers according to the USB
standards.
When the CAT5 Tx BOX is combined with your computer
system or USB hub system, check in advance that it operates
properly.

2

EXTERNAL CONTROL (D-SUB 9-pin)

When the communication via the USB connector is unusable,
this connector can be used for RS-232C communication with
the control device such as the computer.

NOTE:

RS-232C connection isn’t necessary when the COM port
number set by the USB driver is used. Make selection using the
input select switch (USB/RS-232C) (

7

), as necessary.

3

RGB IN (MINI D-SUB 15-pin)

Connector for receiving the analog RGB video signal from the
computer.

4

RGB OUT (MINI D-SUB 15-pin)

Video connector for buffering and outputting the analog RGB
video signal received by the RGB IN connector (

3

).

5

Composite sync signal level switch

Switches the composite sync signal level.
The TTL level and the 0.3 V level are switched.

6

CAT5 OUT (Modular connector 8-pin)

Connector for converting and outputting the video signal
received by the RGB IN connector (

3

) and the control signal

transmitted via the USB connector (

1

) or the RS-232C

connector (

2

) to transmit them on the CAT5 cable.

CAUTION:

Never connect network devices to the CAT5 IN and OUT
connectors. If you do so, they may adversely affect with each
other, causing breakdown.

7

Input select switch (USB/RS-232C)

Switches the control input between the USB connector and the
RS-232C connector.

8

Auxiliary power supply input connector (DC IN

5 V)

Though the power is supplied from the above-mentioned
USB connector, an auxiliary DC power adapter (commercially
available) is also available. When +5 V (according to the product
specifi cations) is supplied from the above-mentioned DC power
adapter, the power supply is automatically switched from the
USB connector. (You cannot use both at the same time.)

CAUTION:

• Don’t apply a voltage out of the specifi ed range to the
auxiliary power supply input connector or connect it with
incorrect polarity. If you do so, the connected devices may
be overheated or damaged.

• The auxiliary power supply input connector isn’t intended
for general use. Commercial DC power connectors are
available in different shapes. When you want to use this
connector, consult a qualifi ed electrician or your dealer in
advance.

Power connector type: DC jack R/A type (Diameter of the
center pin: 2.0 mm)

Pin Name Defi nition

1 +5 V DC Power source
2GND GND

Front Rear

1

2

English-13

English

Flow of preparation

P-1

Preparation for installation

- Determine the installation location

- Ventilation requirements for enclosure mounting

Page 14

Carry out as necessary

P-2

P-3

P-5

P-6

P-7

P-4

P-8

Carry out as necessary

Carry out as necessary

Carry out as necessary

Carry out as necessary

Installing the optional speakers

Con

necting CAT5

- CAT5 for long-distance connection or multiple-monitor connection

Connecting RS-232C

- Monitor control via RS-232C

Connecting LAN

- Monitor connection using LAN

Installing the monitor

- Using the wall mount or ceiling mount

- Using the monitor without the bezel

- Installing in the portrait position

Pages 15 to 16

Page 17

Page 25

Page 26

Pages 18 to 22

Pages 23 to 24

Page 27

Page 28

Connection procedure

- Wi

ring diagram

- Prevention of disconnection of HDMI cable

- Connecting with a computer (analog connection)

- Connecting with a computer (digital connection)

- Connecting a video device (component video/HDMI device)

- Connecting a video device (composite video/S video device)/stereo amplifi er

Connecting the power cord to the monitor

- Connecting the power source

The monitor is ready for use.

How to Use

Preparation for use

English-14

P-1 Preparation for installation

Ventilation requirements for enclosure mounting

To allow heat to disperse, leave space around the monitor as
shown in the fi gure below.

CAUTION:

Don’t block the holes in the rear of the monitor shown in the
fi gure above. If they are blocked, heat accumulates inside the
monitor, causing breakdown. The upper limit of the operation­guaranteed ambient temperature when the monitor is installed
in the landscape position is 40˚C. When installing the monitor
in a case or an enclosure, ensure adequate ventilation to keep
the temperature inside the case 40˚C or lower by providing
a cooling fan or ventilation holes in the case. The upper limit
when the monitor is in the portrait position is 35˚C.
This LCD has a temperature sensor and cooling fan. If the LCD
becomes hot, the cooling fan will turn on automatically. If the
LCD becomes overheated, the “Caution” menu will appear.
If the “Caution” menu appears, stop using the monitor and
allow it to cool. When the LCD monitor is used in an enclosure
or with protection on LCD surface, please check the inside
temperature of the monitor by “HEAT STATUS” (See page 50). If
the temperature is higher than the normal level, set “COOLING
FAN” to ON using the SCREEN SAVER function (See page 46).

Install the monitor on a wall or ceiling strong enough to
support its weight where the screen is easy to view, using
commercially available wall or ceiling mount brackets.

Determine the installation location

CAUTION:

DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF.
Installing your LCD monitor must be done by a qualifi ed
technician. Contact your dealer for more information.

CAUTION:

MOVING OR INSTALLING THE LCD MONITOR MUST BE
DONE BY THREE OR MORE PEOPLE.
Failure to follow this caution may result in injury if the LCD
monitor falls.

CAUTION:

Do not mount or operate the monitor upside down, face up, or
face down.

IMPORTANT:

Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.

Don’t block these holes.

English-15

English

(a): Screws for bezel

P-2 Installing the monitor

Carry out as necessary

Using the wall mount or ceiling mount

Lay the screen face down

Lay the protective sheet on a table, which was wrapped around
the monitor when it was packaged, beneath the screen surface
so as not to scratch the screen surface.
Failure to follow the correct mounting procedures can result
in damage to the equipment or injury to the user or installer.
Product warranty does not cover damage caused by improper
installation.
Failure to follow these recommendations can void your
warranty.
Use M8 screws (having a length 15 mm longer than the
thickness of the mounting bracket) and tighten them securely.
Prevent the screws from loosening using spring washers, etc.
MITSUBISHI ELECTRIC recommends using mounting interface
that comply with TÜV-GS and/or UL1678 standard in North
America.

CAUTION:

For preventing the monitor from falling.

• Install the monitor with metal brackets for wall or
ceiling installation (commercially available) on your own
responsibility. For detailed procedures of installation, refer
to the instructions of the metal brackets.

• To lessen the probability of injury and damage resulting
from fall of the monitor in case of earthquake or other
disaster, be sure to consult the bracket manufacturer for
installation location.

• To lessen the risk of falling of the monitor, thread
commercially available rope through the handles at the
right and left of the monitor and secure the rope to the wall
mount brackets or ceiling mount brackets.

• Do not sleep where the monitor may topple over or fall in
case of an earthquake or other disaster.

• Use screws having enough strength to support the LCD
display monitor (made of stainless steel etc.).

749 749

200 200

Handles

Protective Sheet

(mm)

Tab le

200 200

436.5436.5

Using the monitor without the bezel

CAUTION:

• MDT652S satisfi es the UL requirements as long as it is used
with the bezel attached. When using the monitor without
the bezel, in which case the monitor doesn’t satisfy the UL
requirements, cover the UL certifi cation marking on the rear
panel with the supplied label.

• To prevent static damage to circuit boards, attach the
protective cover to the LCD panel.

1. Unscrew the screws that hold the bezel to remove the bezel
from the monitor.

(a) (a)

(a)

2. Place the supplied protective cover (b) on the LCD panel
using double-sided adhesive tape.

CAUTION:

Never touch the circuit boards because they may be

damaged.

(b)

3. Cover the UL certifi cation marking on the rear panel with
the supplied label (c).

(c)

English-16

P-2 Installing the monitor (continued)

Carry out as necessary

Installing in the portrait position

Conditions:

MDT652S can be installed in the portrait position, under the
following conditions:

CAUTION:

Portrait position is available only when the monitor is wall­mounted or ceiling-mounted.
Operation Environment (Temperature) shall be limited, as
shown below:

Operation Environment:

Temperature 5 - 35°C / 41 - 95°F
Humidity 20 - 80% (without condensation)

Place the monitor in the position shown below.
Do not place the monitor in landscape in any other manner than
shown.
Optional speakers can not be attached when the LCD monitor
is installed in the portrait position.

How to set-up

The “

” logo should be on the LEFT side when

viewed from the front of the monitor.

90° Clockwise

Portrait

Portrait

logo

Landscape

English-17

English

To speaker terminal (L) To speaker terminal (R)

Red(+)/Black(-) Red(+)/Black(-)

SPEAKER (S)(L) SPEAKER (S)(R)

Red(+)

Black(-)

Red(+)

Black(-)

NOTE:

Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.

CAUTION:

Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.

Left speaker Right speaker

Before connecting the signal cable to PC and Video

• Optional speakers can be installed.

• Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.

How to install the optional speakers

1. Use the metal fi ttings and screws supplied with the optional speakers.
For the installation procedure, see the setup guide of the speakers.

2. Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).

P-3

Installing the optional speakers

Carry out as necessary