Mitel WIRELESS LAN STAND DATASHEET

DATA SHEET

MITEL

Wireless LAN Stand

Wireless LAN Connectivity Offering Location-independent Service

Mitel®Wireless LAN (WLAN) Stand is a unique accessory that allows you to put your Mitel IP
phone where it’s most convenient for you, and not be constrained to the area around your local
area network (LAN) or Internet connection. The innovative design of the Wireless LAN Stand
allows your wired Mitel IP phone to be converted to a wireless device so it can connect to the
wireless network anywhere in your enterprise, small business or even at home. Wireless LAN
Stand is ideal for temporary installations, small offices, retail outlets, mobile workers, customers
with wiring constraints, wireless greenfield sites or teleworkers with a wireless LAN at home.

Operates with Standard Wireless Access Points

Wireless LAN Stand allows Mitel IP phones to operate
in existing 802.11b or 802.11g wireless networks. This
is ideal for temporary or existing installations where it
is easier or more cost effective to implement a
wireless network rather than a wired LAN.

Operates as an Access Point –
Create your own Wireless LAN

Alternatively, the Wireless LAN Stand connected to
an IP phone can allow that phone to act as an access
point for up to six other wireless Mitel IP phones. You
can connect a PC to the second port of the wireless
IP phones to have wireless data access. So you can
create your own wireless LAN in small installations!

Integrated Voice Prioritization
and Security Protocols

To protect your data and privacy, all wireless transmissions
can be encrypted with WEP or industrial-strength Wi-Fi
protected access (WPA / WPA2) security. Wireless LAN
Stand supports wireless multimedia (WMM) to ensure
prioritization of voice (QoS) in a wireless network.

Powering Options

• Shipped with 48 V DC universal power adapter
(100 – 240 V, 50 – 60 HZ) with a barrel connector
on one end that plugs into the WLAN Stand,
C8 connector receptacle on the other end

• Requires a country-specific C7 power cord to
be purchased separately

Easy to Install

Wireless LAN Stand easily snaps on and plugs into the
back of the Mitel IP phone, replacing the regular stand
that ships with the IP phone. It requires no additional
ports, licenses or software options, and takes up no
additional space on your desk.

Features

• Allows an IP phone to operate as both a wireless
client or as an access point that supports voice, data
and video over a wireless network

• When operating as an access point, it provides
wireless accessibility for up to six IP phones that
have Wireless LAN Stand installed

• Supports both 802.11b and 802.11g
wireless standards

• In access point mode, supports wireless multimedia
(WMM) for wireless voice prioritization (QoS), and
WPA / WPA2 for security on a wireless network

• Provides wireless data access for the PC via the
10/100 LAN port in the IP phone

• Eliminates Ethernet cabling for wireless
IP phone clients

• Supports two SSIDs for voice and data

Power Consumption

5.3 W (in addition to the power consumed by the
phone that the Wireless LAN Stand is attached to)

Wireless Standards

802.11b, 802.11g

System Requirements

• Mitel Communications Director (MCD),
release 4.0 or later

• Mitel 5000 Communications Platform (CP),
release 2.4 or later

• Mitel SX-200 IP Communications Platform (ICP),
release 4.0 UR5 or later

• Mitel SIP phone software, release 7.2 or later

Supported IP Phones

• Mitel 5212 IP Phone

• Mitel 5215 / 5220 IP Phones (dual mode)

• Mitel 5224 IP Phone

• Mitel 5235 IP Phone

• Mitel 5312 IP Phone

• Mitel 5320 IP Phone

• Mitel 5324 IP Phone

• Mitel 5330 IP Phone

• Mitel 5340 IP Phone

• Mitel 5360 IP Phone

www.mitel.com

Global Headquarters

Tel: [phone]
Fax: [phone]

For more information on our worldwide office locations, visit our website at www.mitel.com/offices

THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date
of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a
result of having made this document available to you or based upon the information it contains.

M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders.

© Copyright 2010, Mitel Networks Corporation. All Rights Reserved. GD 1206_6630 PN 51010411RF-EN

U.S.

Tel: [phone]
Fax: [phone]

EMEA

Tel: [phone]
Fax: [phone]

CALA

Tel: [phone]
Fax: [phone]

Asia Pacific

Tel: [phone]
Fax: [phone]