Page 1
3300 CITELlink Gateway
for Meridian 1 Series Phones
M2006 Phone User Guide
Page 2
NOTICE
The information contained in this document is believed to be accurate in all respects but is not
warranted by Mitel Networks™ Corporation (MITEL®). The information is subject to change without
notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or
subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or
omissions in this document. Revisions of this document or new editions of it may be issued to
incorporate such changes.
Nothing in this document may be reproduced in any manner, whether wholly or in part for an y use
whatsoever, without written permission from Mitel Networks Corporation.
Mitel Networks is a trademark of Mitel Networks Corporation.
Nortel Networks and Meridian are trademarks of Nortel Networks Corporation.
CITELlink is a trademark of Citel Technologies Ltd.
Other product names mentioned in this document may be trademarks of their respective
companies and are hereby acknowledged.
3300 Integrated Communications Platform
M2006 Phone User Guide
Release 5.2
December 2004
®, ™ Trademark of Mitel Networks Corporation
© Copyright 2004, Mitel Networks Corporation
All rights reserved
Page 3
About Your Phone
Contents
About Your Phone .........................................................................................................................4
Conventions.............................................................................................................................6
Using Your Meridian 1 Phone with the 3300 CITELlink Gateway ...........................................6
Tips for Your Comfort and Safety................................................................................................6
Don't cradle the handset!.........................................................................................................6
Protect your hearing................................................................................................................. 6
Customizing Your Phone..............................................................................................................7
Ringer Control.......................................................................................................................... 7
Handset Receiver Volume Control...........................................................................................7
Making and Answering Calls........................................................................................................ 8
Make a call...............................................................................................................................8
Answer a call............................................................................................................................8
Redial.......................................................................................................................................8
Redial - Saved Number............................................................................................................ 8
Speed Call Keys.......................................................................................................................9
Speed Call - Personal..............................................................................................................9
On-Hook Dialing.....................................................................................................................10
Call Handling................................................................................................................................ 11
Hold........................................................................................................................................11
Transfer..................................................................................................................................11
Conference.............................................................................................................................11
Conference Split.....................................................................................................................12
Call Forward...........................................................................................................................12
Call Forward - Remote...........................................................................................................13
Call Forward - End Chaining..................................................................................................13
Call Forward - Override..........................................................................................................14
Messaging - Callback............................................................................................................. 14
Messaging - Cancel Callback ................................................................................................14
Messaging - Cancel All Callbacks..........................................................................................15
Using Advanced Features...........................................................................................................16
Account Codes.......................................................................................................................16
Call Park.................................................................................................................................16
Call Pickup.............................................................................................................................16
Campon..................................................................................................................................17
Do Not Disturb........................................................................................................................17
Override .................................................................................................................................17
Paging....................................................................................................................................18
Direct Paging..........................................................................................................................18
Group Paging / Meet Me Answer...........................................................................................18
Trunk Flash............................................................................................................................19
Tag Call..................................................................................................................................19
3
Page 4
M2006 Phone User Guide
About Your Phone
The Mitel® 3300 CITELlink Gateway allows your Nortel Networks™ Meridian 1 phone to
work on a Mitel 3300 Integrated Communications Platform (3300 ICP).
When used with a 3300 ICP, your M2006 phone has seven fixed-function keys
(TRANSFER,
Down) and four personal keys. Key 3 (see illustration below) is always your Prime Line;
the remaining personal keys can be programmed as:
• Features keys (for example, Swap). Only the administrator can program feature
keys.
• Speed Call keys. You can program speed call keys from your phone.
• Line Appearances. Only the administrator can program line appearances.
CANCEL (Rls), HOLD, DOWN ARROW, >>> (Volume Up), <<< (Volume
4
Phone buttons
Button Number Description
1 Cancel
2 Hold
3 Prime Line
4, 5, 6 Personal Keys
7 Transfer
8 Message
9 Message indicator
Phone status indicators
When line is the indicator is
Idle Off
Busy On
Ringing Flashing slowly
On hold at your set Flashing rapidly
Page 5
About Your Phone
On Hold at another set Flashing rapidly
5
Page 6
M2006 Phone User Guide
Conventions
The following conventions are used in this user guide:
• Fixed-function keys are identified by bold uppercase letters (for example,
TRANSFER).
• Text that appears on the display is identified by double quotes (for example,
"Language?").
Using Your Meridian 1 Phone with the 3300 CITELlink Gateway
Please note the following differences in the way your phone now operates:
• Some features require you to dial a
access codes whenever you have dial tone. The feature access codes in this user
guide may be different from the ones programmed in your system. Ask your
Administrator for the list of feature access codes you can use.
• When you have a message, the message indicator is lit. You may also have stutter
dial tone (if this has been configured by your administrator).
• You do not need to select a line before dialing a number. See On-hook Dialing on
page 10 for more information.
feature access code. You can use feature
Tips for Your Comfort and Safety
Don't cradle the handset!
Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if
you cradle the handset between your ear and shoulder.
Protect your hearing
Your phone has a control for adjusting the volume of the handset receiver. Because
continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a
moderate level.
6
Page 7
Customizing Your Phone
Customizing Your Phone
Ringer Control
To adjust the Ringer Volume while the phone is ringing:
• Press <<< or >>>.
Handset Receiver Volume Control
To adjust the Handset Receiver Volume when you are using the handset:
• Press <<< or >>>.
7
Page 8
M2006 Phone User Guide
Making and Answering Calls
Make a call
1. Lift the handset.
2. If you want to use a Non-Prime Line, press a Line Appearance key.
3. Do one of the following:
• Dial the number.
• Press a Speed Call key.
Answer a call
• Lift the handset.
- or Press the flashing Line appearance key and lift the handset.
Redial
To redial the last number that you manually dialed:
1. Lift the handset.
2. Dial *01.
Redial - Saved Number
To save the last number that you manually dialed:
1. Lift the handset.
2. Dial
To Redial a saved number:
1. Lift the handset.
2. Dial
**79.
*6*.
8
Page 9
Making and Answering Calls
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call
(press a Speed Call Key during a call to send a multi-digit password, for instance).
Note: Programming a Speed Call key deleted any previously programmed feature or speed
call for that key.
To dial a stored Speed Call number:
1. Lift the handset.
2. Press a Speed Call key.
To store a Speed Call number:
1. Press SUPERKEY.
2. Press a personal key that isn't a line appearance key.
3. Press
4. Press
5. Do one of the following:
6. Press
7. Press the selected personal key.
8. If you want to make the number private, press
9. Press
* (Change).
* (Yes).
• To enter a new number, dial the number. Press
a pause during dialing; press
• To enter a trunk flash, press
more information about the use of this feature.)
* (Save).
SUPERKEY to exit, or press a personal key to program another speed call
number.
Speed Call - Personal
Note: Personal Speed Call lists must be configured by the Administrator.
To store a personal Speed Call number:
HOLD between digits to create
HOLD more than once to lengthen the pause.
TRANSFER. (See Trunk Flash on page 19 for
* (Yes). Otherwise, press # (No).
1. Lift the handset.
2. Dial
3. Enter an index number between
4. Dial the number to be stored.
5. Hang up.
9
67.
00 and 09.
Page 10
M2006 Phone User Guide
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial
3. Enter an index number between
58.
On-Hook Dialing
To dial without lifting the handset:
1. Dial the number.
2. Lift the handset.
00 and 09.
10
Page 11
Call Handling
Call Handling
Hold
To place a call on hold:
• Press HOLD.
To retrieve a call from Hold:
1. Lift the handset.
2. Press
To retrieve a call from Hold at another station:
• Dial **1 and the number of the station that placed the call on Hold.
Transfer
To Transfer an active call:
1. Press TRANSFER.
2. Dial the number of the third party.
3. Do one of the following:
• To complete the Transfer, hang up.
• To announce the Transfer, wait for an answer, consult, and hang up.
• To cancel the Transfer, press
Conference
HOLD.
CANCEL.
To form a Conference when a two-party call is already in place, or to add
another party to an existing Conference:
1. Press TRANSFER.
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
TRANSFER.
To leave a Conference:
• Hang up.
11
Page 12
M2006 Phone User Guide
Conference Split
To Split a Conference and speak privately with the original party:
1. Press TRANSFER.
2. Dial
To return to the conference call:
• Press TRANSFER.
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. Always redirects all
incoming calls regardless of the state of your phone. Busy-Internal redirects internal calls
when your phone is busy, and Busy-External redirects external calls when your phon e is
busy. No Answer-Internal redirects internal calls after several rings if you don't answer,
and No Answer-External redirects external calls after several rings if you don't answer.
Note: For information about "I Am Here?", see Call Forward - Remote on page 13.
To program Call Forward:
Programming a feature using SUPERKEY without a display is problematic at best, since
the list of available features depends on which ones are enabled in the user's Class of
Service. In addition, there is no way to know whether the feature is enabled or disabled
(for example, enabling and disabling Call Forward is a toggle function).
1. Lift the handset.
*41.
12
2. Do one of the following:
• To program Call Forward Always, dial
• To program Call Forward Busy-All Calls, dial
• To program Call Forward Busy-Internal, dial
• To program Call Forward Busy-External, dial
• To program Call Forward No Answer-All Calls, dial
• To program Call Forward No Answer-Internal, dial
• To program Call Forward No Answer-External, dial
3. Dial the destination number.
4. Hang up.
*1*.
**70.
63.
62.
**71.
65.
66.
To cancel Call Forward settings:
1. Lift the handset.
2. Do one of the following:
• To cancel Call Forward Busy (internal and/or external), dial
• To cancel Call Forward No Answer (internal and/or external), dial
**72.
**74.
Page 13
Call Handling
• To cancel all Call Forward settings, dial ##88.
3. Hang up.
Call Forward - Remote
To forward calls from a remote station to your current location:
1. Lift the handset.
2. Dial **8.
3. Dial the extension of the remote extension.
4. Hang up.
To cancel Call Forward - Remote from the station that set the remote
forwarding:
1. Lift the handset.
2. Dial
3. Dial the extension of the remote station.
4. Hang up.
**77.
To cancel Call Forward - Remote from the station that was forwarded:
1. Lift the handset.
2. Dial
3. Hang up.
#8.
Call Forward - End Chaining
To ensure that calls do not get forwarded again by the destination number:
1. Lift the handset.
2. Dial
3. Hang up.
To again allow calls to be forwarded by the destination number:
64.
1. Lift the handset.
2. Dial
3. Hang up.
13
**73.
Page 14
M2006 Phone User Guide
Call Forward - Override
To override Call Forward and ring a station:
1. Lift the handset.
2. Dial
3. Dial the extension number.
*1*.
Messaging - Callback
To leave a Callback Message on a phone when you hear busy or ringback
tone:
• Press MESSAGE.
To respond to a message waiting condition on your phone:
1. Press MESSAGE.
2. Do one of the following:
• To call the message sender, press
• To erase the message, press
To answer a Callback:
• Lift the handset.
# (Call).
* (Erase).
Messaging - Cancel Callback
To cancel a Callback:
1. Lift the handset.
2. Dial
3. Dial the number of the called station.
4. Hang up.
14
*1#.
Page 15
Call Handling
Messaging - Cancel All Callbacks
To cancel all Callbacks:
1. Lift the handset.
2. Dial
3. Hang up.
#1.
15
Page 16
M2006 Phone User Guide
Using Advanced Features
Account Codes
To use Forced Account Codes:
1. Lift the handset.
2. Dial the Account Code digits.
3. Press
To enter an Account Code during a call:
1. Press TRANSFER.
2. Press **3.
3. Dial the Account Code digits.
4. Press
5. Press CANCEL.
Call Park
To retrieve a call parked by the attendant:
1. Lift the handset.
2. Dial
3. Dial the console ID and the Hold Slot number.
Call Pickup
#.
# (Save).
*23.
16
To answer a call that is ringing at another station in your Pickup Group:
1. Lift the handset.
2. Press
*6.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
2. Dial
3. Dial the number of the ringing station.
**6.
Page 17
Using Advanced Features
Campon
To Campon to a busy station:
• Dial 3 or wait for the time-out period to expire.
To retrieve a call when you hear Campon tone:
• Depress the hookswitch momentarily, and then dial *3. The current call is put on
hold and you are connected to the waiting call.
Do Not Disturb
To activate or deactivate Do Not Disturb:
1. Lift the handset.
2. Do one of the following:
• To activate Do Not Disturb, dial
• To deactivate Do Not Disturb, dial
*5.
#5.
3. Hang up.
To activate Do Not Disturb from a remote station:
1. Lift handset.
2. Dial
3. Dial the number of the station to which Do Not Disturb is to apply.
4. Hang up.
To deactivate Do Not Disturb from a remote station:
1. Lift handset.
2. Dial
3. Dial the number of the station with Do Not Disturb activated.
4. Hang up.
Override
To use Override when you encounter busy or DND tone:
**5.
##5.
• Dial 2.
17
Page 18
M2006 Phone User Guide
Paging
To use Paging:
1. Lift handset.
2. Press
3. Dial the Paging zone number (if require d).
4. Make the announcement.
Direct Paging
Direct Paging allows you to page a party through their phone speaker. If the paged party
has Off-Hook Voice Announce enabled, the page will be heard even when the party is on
a handset call.
To page a party:
1. Lift the handset.
2. Press
3. Dial the extension number.
4. Speak to the dialed party after the tone.
To answer a Direct Page (indicated by a single burst of tone):
• Lift the handset.
**9.
*37.
Group Paging / Meet Me Answer
Group Paging allows you to page a group of telephones through their built-in speakers.
You can belong to as many as three paging groups with one group designated as your
“prime” group.
When you need to respond to a Group Page but don't know the identity or extension
number of the paging party, use the Meet Me Answer feature. You have up to 15 minutes
after receiving the page to use Meet Me Answer.
To make a Group Page:
1. Lift the handset.
2. Dial
3. Do one of the following:
4. Speak to the dialed party after the tone.
18
*37.
• To page your prime page group, press
• To page a specific page group, dial the page group directory number.
#.
Page 19
Using Advanced Features
To respond to a Group Page by using Meet Me Answer:
1. Lift the handset.
2. Dial
3. Do one of the following:
• To respond to a page from your prime page group, press
• To respond to a page from a specific page group, dial the page group directory
Trunk Flash
The Trunk Flash feature allows you to access Centrex features (if available) while you
are talking on an outside call.
To flash a trunk while talking on an outside call:
1. Press TRANSFER.
2. Dial
3. Wait for dial tone.
4. Dial the Centrex feature access code.
Tag Call
*88.
#.
number.
*57 for a single flash or *56 for a double flash.
Tag Call allows you to “tag” any threatening call that you receive. Using this tag, your
system administrator can identify the source of the malicious call and provide this
information to appropriate personnel or authorities. You can only tag calls during an
active two-party call.
Note: Tagging a call unnecessarily may result in fines or other penalties.
To tag a malicious call:
1. Press TRANSFER.
2. Dial
If the call was successfully tagged “Thank You” is shown on the display; otherwise, “Not
Allowed” is displayed.
*55.
19
Loading...