Contents
1.Instruction book
2.Alignment protractor
3.Mounting template
4.Main pivot assembly
5.Arm tube / Headshell
6.Base plate assembly (complete with phono leads)
7.Counterweight
8.Syringe with silicone fluid
9.Hardware box :
a.6 cartridge mounting screws
b.4 self-tapping base mounting screws
c.4 base adaptor bushes
d.2 Allen keys
e.2 bias weights
f.1 bias filament
g.3 damping paddles
Specifications
Effective length: |
229 mm |
|
Effective mass: |
< 5.5g (depending on counterweight) |
|
Friction: |
< 15 mg (horizontal and vertical planes) |
|
Downforce error: |
< 0.2 % |
|
Fundamental resonance: |
5 |
– 18 Hz (depending on cartridge) |
Cartridge mass: |
2 |
- 10 g |
Cartridge compliance range: |
8 |
– 50 cm/dyne (cu) * |
Connections, phono plugs: |
1200 mm cable |
|
Armtube / Headshell assy: |
Interchangeable |
|
Hydraulic damping:: |
Viscous fluid |
|
Cable capacitance: |
125 pf (per channel) |
|
Adjustments: |
Height, tilt, overhang, bias |
|
Finish: |
Black |
|
Optional extra: |
Arm tubes and counterweight |
* Three different damping paddles are supplied to optimize the performance of different cartridges of varying compliance.