Miele KWT1613SF User Manual

MasterCool Refrigeration
Side-by-Side Merging Combinations
For Vi Models

8mieleusa.com

Side-by-Side Merging Kit

en

en

KSK 1002

This merging kit should be used for
side-by-side installation of the following
models:

– K 18x1 Vi, K 19x1 Vi,

K 18x3 Vi, K 19x3 Vi

– F 14x1 Vi, F 18x1 Vi,F19x1Vi

F 14x3 Vi, F 18x3 Vi,F19x3Vi

– KF 18x1 Vi, KF 19x1 Vi,

KF 18x3 Vi, KF 19x3 Vi

– KWT 16x1 Vi, KWT 16x3Vi

Side-by-side

...without partition

If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.

...withpartition

The minimumthicknessofthe partition

5

is

/8"(16 mm).

If thereisapartition withathickness

5

from

/8"(16 mm)to65/16" (160 mm)

betweenthe adjacentappliances, then
each appliance should be individually
installed within itsown niche using the
mountingaccessories included.

In this case,you will only need the
heating matfrom the "Merging Kit" to
avoid condensationand prevent
damages.

Page 2 of 7

Product and Cut-out Dimensions
48” Side-by-Side Combination
F14X3 & K18X3

FOR FLUSH INSTALLATION

25" min.*

29 3/4"

84"

24 5/8"

O

48"

E

10 1/4"

17 3/4"

83 1/2" - 85 3/8"

UNITS ACCEPT CUSTOM

FRONT PANELS

See individual spec files for details

Location Codes

5 foot - 120 Volt - 15 Amp 3-wire molded plug power

E -

supply connects lower left rear

One (1)Standard NEMA 5-15 Duplex Outlet - locate

O -

less than 9" above finished floor

Notes

• KSK1002 Merging kit must be used when
combining units

• All Installations must be done in accordance
with local codes

• Sides of adjoining cabinets should be filled
(flush to frame) to insure proper fit and finish

• For Proud Installation — please adjust accordingly

*Depth assumes a 3/4" panel, please adjust according
to custom panel thickness

1 1/8"

4 1/8"

"8/3 8 - "2

"2/1 8 - "8/5 6

Page 3 of 7