How it Works
Miele
Loading...
K
Loading...
Loading...
KFN 15943 DE cs
Specification Sheet
3 pgs549.57 Kb0
Table of contents
Loading...

Miele KFN 15943 DE edt, KFN 15943 DE cs Operating instructions

Operating and Installation Instructions Fridge-freezer Combination
To prevent accidents and machine damage, read these instructions be- fore installation or use.
en-US, CA M.-Nr. 10 738 490
Contents
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5
Cleaning the refrigerator................................................................................... 21
Automatic cold air circulation (DynaCool) ........................................................ 24
Temperature range ........................................................................................... 25
Settings overview ............................................................................................. 29
2
Contents
Fruit and vegetables.........................................................................................36
Protein-rich food...............................................................................................36
If the Ice Maker is going to be turned off for a long period of time ................. 47
3
Contents
Climate class .................................................................................................... 73
Wall gap............................................................................................................ 74
Fitting the anti-tip device.................................................................................. 74
Aligning the machine........................................................................................ 75
4

IMPORTANT SAFETY INSTRUCTIONS

This appliance complies with all statutory safety requirements. Please note that inappropriate use can lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on installation, safety, use and maintenance.
Miele cannot be held liable for non-compliance with these instruc­tions.
Keep these instructions in a safe place and ensure that new users are familiar with the contents. Pass them on to any future owner.
Danger of injury! Due to the sheer size and weight of the appliance, it needs to be ensured that it cannot tip forward when the door is open and fully stocked.
Set up the appliance with the supplied anti-tip devices in accor­dance with the operating and installation instructions.

Appropriate use

This appliance is intended for use in the home and similar environ-
ments. This appliance is not intended for use outdoors, in damp environ­ments or in places exposed to rain.
This appliance is intended for domestic use only for cooling and
storing food and drink as well as for storing deep frozen food, freez­ing fresh food and for making ice. Any other usage is not supported by the manufacturer and could be dangerous.
5
IMPORTANT SAFETY INSTRUCTIONS
This appliance is not suitable for storing and keeping cool
medicines, blood plasma, laboratory preparations or other such ma­terials or products. Incorrect use of the appliance for such purposes can cause deterioration of the items stored. The appliance is not suitable for use in areas where there is a risk of explosion. Miele cannot be held liable for damage resulting from improper or in­correct use of the appliance.
Persons (including children) which lack physical, sensory or men-
tal abilities or experience with the machine should not use it without supervision or instruction by a responsible person.

Safety with children

To reduce the risk of injury, do not allow children to play in, on or
near the appliance.
Ensure that any packing material is disposed of safely and kept
out of the reach of children. DANGER of suffocation!
6
IMPORTANT SAFETY INSTRUCTIONS

Technical safety

The refrigerant system is tested for leaks. This appliance complies
with statutory safety requirements.
This appliance contains the refrigerant Isobutane (R600a), a natu-
ral gas which is environmentally friendly. Although it is combustible, it does not damage the ozone layer and does not increase the green­house effect. The use of this refrigerant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the com­pressor, you might be able to hear the refrigerant flowing around the system. This is unavoidable, and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking refrigerant can cause severe irritation to the eyes. In the event of any damage:
– avoid open flames and anything that creates a spark,
– disconnect the appliance from the electrical power supply,
– ventilate the room where the appliance is located for several min-
utes, and
– contact Miele Technical Service.
The more coolant there is in an appliance, the larger the room it
should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every 11g of coolant at least 1m3 of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance.
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data plate corresponds to the household supply. Check that this is the case before connecting the appliance. Consult a qualified electrician if in any doubt.
7
IMPORTANT SAFETY INSTRUCTIONS
The electrical safety of the appliance can only be guaranteed
when correctly grounded. It is essential that this standard safety re­quirement is met. If in any doubt please have the electrical installa­tion tested by a qualified electrician.
Reliable and safe operation of this appliance can only be assured
if it has been connected to the electricity supply.
If the power cord is damaged, it must be replaced by a Miele au-
thorized technician in order to protect the user from harm.
Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee the required safety of the appliance.
If moisture gets into electrical components or into the power cord,
it could cause a short circuit. Therefore, do not operate the machine in areas where there may be moisture or splashing water (e.g., garages, laundry rooms).
This appliance must not be installed and operated in mobile in-
stallations (e.g. on a ship).
Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
The machine must be disconnected from the power supply during
installation, maintenance, and repair work, and installation work on the fresh water connection. The machine is only completely isolated from the power supply when:
– the fuses have been switched off, or
– the circuit breaker has been removed completely, or
– the power cord has been unplugged. Pull on the plug and not on
the power cord when disconnecting it from the power supply.
8
IMPORTANT SAFETY INSTRUCTIONS
Unauthorized installation, maintenance, and repairs, or a faulty
fresh water connection can cause considerable danger for the user. Installation, maintenance, and repairs, installation work on the fresh water connection, and all repairs on the ice/water outlet must only ever be carried out by a Miele authorized technician.
The ice cube maker must only be connected to a cold water line.Miele cannot be held liable for damage caused by a faulty con-
nection to the fresh water supply.
Any manufacturer's warranty will be void if the appliance is not re-
paired by a Miele approved service technician.
Defective components should only be replaced by Miele original
parts. Only with these parts can the manufacturer guarantee the safety of the appliance.

Correct use

The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate in­side the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, will lead to the appliance switching off for longer periods so that it cannot maintain the required tempera­ture.
WARNING! DANGER of overheating! Do not cover or block the air
vents. This can impair the efficiency of the appliance, increase the power consumption and cause damage to the appliance.
If storing food which contains a lot of fat or oil in the appliance,
make sure that it does not come into contact with plastic compo­nents as this could cause stress cracks or break the plastic.
Do not store explosive materials in the appliance or any products
containing propellants (e.g. spray cans). Electrical components could cause flammable vapors to ignite. DANGER of fire and explosion.
9
IMPORTANT SAFETY INSTRUCTIONS
Do not operate any electrical equipment (e.g. an electric ice cream
maker) inside the appliance. DANGER of sparking and explosion.
Do not store cans or bottles containing carbonated drinks or liq-
uids which could freeze in the freezer section. The cans or bottles could burst, causing injury or damage.
Never handle frozen food or the metal parts of the appliance with
wet hands. Your hands may freeze to the frozen food or to the metal. DANGER of frost burn!
Do not take ice cubes out with your bare hands and never place
ice cubes or popsicles in your mouth straight from the freezer sec­tion. The very low temperature of the frozen ice or popsicles can cause frost burn to the lips and tongue. DANGER of injury.
Do not refreeze partially or fully defrosted food. Consume de-
frosted food as soon as possible, as it will lose its nutritional value and spoil if left for too long. Defrosted food may only be refrozen af­ter it has been cooked.
When eating stored food, there is a danger of food poisoning.
Storage times will depend on several factors, including the freshness and quality of the food, as well as the temperature at which it is stored. Observe the manufacturer's “use-by” dates and storage in­structions.
Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty may become invalid.

Stainless steel machines:

Adhesives will damage the coated stainless steel surface and
cause it to lose its dirt-repellent protective coating. Do not use sticky notes, transparent adhesive tape, masking tape, or other types of adhesive on the stainless steel surface.
The surface is easily scratched. Even magnets can cause scratch-
ing.
10
IMPORTANT SAFETY INSTRUCTIONS

Cleaning and maintenance

Do not use any oil or grease on the door seals.
They can cause the seals to deteriorate over time.
Never use a steam cleaner to clean the appliance.
The steam can reach the electrical components and cause a short circuit.
Sharp edged or pointed objects will damage the evaporator, caus-
ing irreversible damage to the appliance. Do not use sharp edged or pointed objects to
– remove frost or ice,
– separate frozen foods or remove ice trays.
Never place electric heaters or candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays or de-icers, as they could contain
substances which could damage the plastic parts or which might cause the build-up of gases and pose a danger to health.

Transport

To avoid damage to the appliance, always transport it upright and
in its packaging.
DANGER of injury and damage. The appliance is very heavy and
must be transported by two people.

Disposal of your old appliance

Children could become trapped in the machine and could suffo-
cate.
– Remove the machine doors.
– Remove the drawers.
– Leave the adjustable shelves in the machine so children cannot
climb inside.
11
IMPORTANT SAFETY INSTRUCTIONS
DANGER of electric shock!
– Cut the plug off the power cord.
– Cut the power cord off the old appliance.
Dispose of them separately from the appliance.Ensure that the appliance is not stored in the vicinity of gasoline or
inflammable gases and liquids during and after disposal.
Make sure that the coolant pipework is not damaged during dis-
posal to avoid uncontrolled leakage of oil and coolant (see data plate for coolant type).
Splashes of coolant can cause damage to the eyes. Be careful not
to damage any part of the pipework while awaiting disposal, e.g. by
– puncturing the coolant channels in the evaporator,
– kinking any pipework,
– scratching the surface coating.

Symbol on the compressor (depending on model)

This information is only relevant for recycling. There is no risk during normal oper­ation.
The oil in the compressor can be fatal if swallowed or if it pene-
trates the airways.
12

Caring for the environment

Disposal of packaging material

The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.
Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.

Disposal of your old appliance

Electrical and electronic appliances contain valuable materials. They also contain certain substances, compounds and components which were essential for the proper functioning and safe use of the equipment. Handling these mate­rials improperly by disposing of them in your household waste can be harmful to your health and the environment. There­fore, please do not dispose of your old appliance with regular household waste and follow local regulations on proper disposal.
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
Take care not to damage the pipework at the back of your appliance before or during transportation to an authorized, environmentally friendly collection de­pot. This way, coolant in the pipework and oil in the compressor will be contained, and will not leak into the environment.
Please ensure that your old appliance does not pose a danger to children while being stored prior to disposal. See “IMPORTANT SAFETY INSTRUC­TIONS” for more information.
13

How to save energy

Installation/Main­tenance
Normal energy consumption
In a well-ventilated room. In an enclosed, poorly venti-
Protected from direct sun­light.
Away from heat sources (ra­diator, range/oven).
Where the ideal room tem­perature is approx. 68°F (20°C).
Ventilation gaps unob­structed and dusted regu­larly.
Compressor and metal grill (heat exchanger) at the back of the appliance dusted at least once a year.
When the gap between the back of the appliance and the wall is at least 2" (51mm).
Increased energy consumption
lated room.
In direct sunlight.
Near a heat source (radiator, oven).
Where the ambient room temperature is above 77°F (25°C).
Where the ventilation gaps are blocked and full of dust.
Dust build-up on the com­pressor and metal grill (heat exchanger).
When the gap between the back of the appliance and the wall is less than 2" (51mm).
Temperature setting
14
39°F to 41°F (4°C to 5°C) in the refrigerator section
0°F (-18°C) in the freezer section
The lower the temperature in the appliance, the higher the energy consumption.
How to save energy
Normal energy consumption
Use The drawers, and shelves
are arranged as they were when the appliance was de­livered.
Only open the door when necessary and for as short a time as possible. Store food in an organized way.
When shopping, use a cooler bag and place the food in the appliance as soon as possible. Replace any food removed as quickly as possible, be­fore it warms up too much. Allow hot food and drinks to cool down before placing them in the appliance.
Store food well packaged or covered.
Increased energy consumption
Frequent opening of the door for long periods will cause a loss of coldness. The appliance will try to cool down and the compressor will run for longer periods.
Hot food or food at room temperature raises the tem­perature inside the refrigera­tion appliance. The appli­ance will try to cool down and the compressor will run for longer periods.
The evaporation or conden­sation of liquids in the refrig­erator section will cause a loss of coldness.
Place frozen food in the re­frigerator section to defrost.
Do not overfill the appliance in order to allow the air to circulate.
Poor air circulation will cause a loss of coldness.
15

Guide to the appliance

Control panel

Sensor buttons for the refrigerator section settings area
a
For turning the ice cube maker on
and off
b
For turning the Automatic SuperCool
function on and off
c
For turning the refrigerator section on
and off
d
For setting the temperature
( for warmer)
e
For setting the temperature
( for colder)
f
Display LEDs (see “Display LEDs” ta­ble for explanation)
g
Display with temperatures and sym­bols (symbols only visible during use; see “Symbols on the display” table for explanation)
Sensor buttons for the freezer sec­tion settings area
h
For setting the temperature ( for warmer)
i
For setting the temperature ( for colder)
j
For turning the machine on and off
k
For turning the SuperFrost function on and off
l
For turning the door or temperature alarm off
16
Guide to the appliance

Display LEDs and symbols on the display

Display LED Meaning
Automatic SuperCool
(left)/SuperFrost (right)
Power failure Flashes in the event of a power failure
Safety lock Lock to stop the machine being turned off
Ice cube maker For turning the ice cube maker on and off
Alarm Flashes when the door or temperature alarm
Information on the display Meaning
DEMO Demo mode Demo mode has been activated (see “Fre-
Sabbath mode Turning Sabbath mode on and off
MENU Settings mode Lights up when settings are being adjusted
°F Temperature unit The default setting is °F; this can be
The function can be selected depending on the section (see “Using Automatic Super­Cool and SuperFrost”).
by mistake
and for setting the water quantity; flashes when there is an error message relating to the ice cube maker
is triggered
quently asked questions–Messages on the display”).
switched to °C
17
Guide to the appliance
a
Control panel with display
b
Fan
c
Interior lighting
d
Bottle rack
e
Egg tray/door shelf
f
Holder with carbon filter (Active AirClean)
g
Adjustable shelf
h
Fruit and vegetable drawers
i
Bottle shelf with bottle holder
j
NoFrost module
k
Ice cube drawer with automatic ice cube maker
l
Freezer drawers
18
For easier installation, there are trans­port handles on the back at the top of the machine and transport wheels un­derneath.

Accessories

Accessories supplied

Egg tray

Butter dish

Bottle rack

Bottle holder

Attach the bottle holder to the bottle shelf.
The bottle holder can be moved left or right. This way you can be sure that the bottles will be more secure when the appliance door is opened and closed.

KKF-FF carbon filter with holder (Active AirClean)

Bottles can be stored horizontally in the refrigerator section using the bottle rack to save space. The bottle rack can be placed at differ­ent positions in the refrigerator section.
This carbon filter neutralizes unpleasant odors in the refrigerator section for im­proved air quality.
19
Accessories

Cool pack

The cool pack prevents the temperature in the freezer rising too quickly in the event of a power outage. This can help prolong the storage time.
The cool pack will be at its most effec­tive after it has been in the freezer for approx. 24hours.

Optional accessories

A range of useful Miele accessories and care products are available for your ap­pliance.
KKF-RF ActiveAirClean replacement filters
Replacement filters to fit the Active Air­Clean holder are available. We recom­mend replacing the carbon filters every 6months.

KKF-FF Active AirClean carbon filter with holder

Carbon filters neutralize unpleasant odors in the refrigerator section for im­proved air quality.
20
The carbon filter holder clips onto the protective strip at the back of the shelf and can be moved as necessary.
Accessories are available to order via the Miele Webstore, from Miele di­rectly (see back cover for contact de­tails) or from your Miele dealer.

Before first use

Before first use

Packaging material

Remove all packaging material from
the inside of the appliance.

Removing the protective film

The stainless steel strips on the door shelves and adjustable shelves have a layer of protective film to prevent dam­age during transportation. The machine doors, and side panels where applica­ble, have a layer of protective film too.
Do not remove the protective film un-
til the machine has been installed in its final location.

Cleaning the refrigerator

Please refer to the relevant instruc­tions in “Cleaning and care”.
Important! Each time it is used, the Miele stainless steel conditioning agent forms a water-repellant and dirt­repellant protective coating.
Treat the stainless steel strips and
stainless steel frame inside the ma­chine with the Miele stainless steel conditioning agent immediately after removing the protective film (see “Product description – Optional ac­cessories”).
Clean the inside of the appliance and
the accessories.
21

Switching on and off

Operating the machine

A light touch of the finger on the sensor buttons is all that is required to operate this machine.

Switching on the refrigerator

The Freezer Zone and the Fridge Zone can be switched on at the same time using the two On/Off buttons.
To enable the temperature to get suffi­ciently cold inside the refrigerator, al­low it to run for approx. 3–5hours (de­pending on the ambient temperature) before placing food in it. Do not place food in the Freezer Zone until it has reached the required cold­ness (at least 0°F/-18°C).
Touch one of the two On/Off but-
tons until the temperature display lights up.
The refrigerator will be switched on and the interior lighting will come on in the Fridge Zone.
The temperature display for the Fridge Zone indicates the temperature in the Fridge Zone.
– If the temperature in the Freezer Zone
is above 32°F (0°C), bars will flash in the temperature display for the Freezer Zone.
– As soon as the temperature drops
below 32°F (0°C), the temperature in the Freezer Zone will flash on the dis­play.
– The display LEDs will flash until
the set temperature has been reached in the Freezer Zone.
The refrigerator will gradually reach the pre-set temperatures:
– Temperature in the Fridge
Zone=37°F (3°C)
– Temperature in the Freezer Zone=
0°F (-18°C)
22
Switching on and off
Switching off the entire appli­ance
Touch the right-hand On/Off but-
ton until all of the displays go off.
If this does not work, the safety lock is activated (see “Selecting additional set­tings – Activating and deactivating the safety lock”). The refrigerator section in­terior lighting will go out and the cooling process will be turned off.

Turning off the refrigerator section separately

The refrigerator section can be turned off without having to turn off the freezer section. The freezer section cannot be turned off separately.
Touch the left-hand On/Off button
until the temperature display for the refrigerator section goes off.
If this does not work, the safety lock is activated (see “Selecting additional set­tings – Activating and deactivating the safety lock”). The refrigerator section will be turned off. The temperature in the freezer sec­tion will still be shown on the display. The refrigerator section interior lighting will go out.

Turning the refrigerator section on separately (if previously turned off)

To turn the refrigerator section on,
touch the left-hand On/Off button.
The refrigerator section will be turned on and will start to cool. It will reach the temperature set. The interior lighting will come on when the refrigerator section door is opened.

Turning off for longer periods of time

If you go away for a prolonged
period, there is a danger of mould building up inside the appliance if you leave it switched off with the door shut without cleaning it first.
It is essential to clean the appliance.
If the appliance is not going to be used for a prolonged period of time, e.g. while on vacation:
turn the appliance off,unplug the appliance or flick the cir-
cuit breaker to off,
empty the ice cube drawer,close the shut-off valve in the water
supply line,
clean the appliance andleave the door(s) ajar to air the appli-
ance and avoid odors building up in­side the appliance.
It is also advisable to carry out the last two instructions if you are switching the refrigerator section off for a longer period of time.
23

The correct temperature

It is very important to set the correct temperature for storing food in the ap­pliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influ­ences the growth rate of these bacteria. Reducing the temperature reduces their growth rate.
The temperature in the appliance will rise:
– The more often the door is opened
and the longer it is kept open
– The more food that is stored in it
– The warmer the food is which is be-
ing put into it
– The higher the ambient temperature
surrounding it. The appliance is de­signed for use within specific ambi­ent temperatures (climate range). Do not use in ambient temperatures for which it is not designed.

. . . in the refrigerator section

We recommend a temperature of 39°F (4°C) in the refrigerator section.
Automatic cold air circulation (Dyna­Cool)
The fan automatically turns on when the cooling system for the refrigerator sec­tion turns on. It distributes the tempera­ture in the refrigerator section to all ar­eas evenly so that all the food inside will be chilled to about the same degree.

. . . in the freezer section

To freeze fresh food and to store frozen food for a long time, a temperature of 0°F (-18°C) is required. Partially de­frosted or fully defrosted food must not be re-frozen. Food may be re-frozen once it has been cooked.
24
The correct temperature

Temperature display

In normal operation, the upper tem­perature display shows the current
average refrigerator section tem­perature and the lower temperature display shows the highest freezer section temperature currently being
recorded within the machine.
Depending on the ambient temperature and the temperature setting, it can take the machine a few hours to reach the temperature required and for this tem­perature to then be shown as a con­stant temperature on the display.
If the temperature in the freezer
remains above 0°F (-18°C) for a long time, check that the frozen food has not started to defrost.
If it has, use the food as soon as possible or cook it before freezing it again.

Setting the temperature

Use the two and sensor buttons
for the relevant section to set the temperature higher or lower.
The following changes will be seen on the display when the sensor buttons are touched:
– With the first touch: The last temper-
ature set flashes.
– Each subsequent touch: The temper-
ature changes in 1° increments.
– Keeping your finger on the sensor
button: The temperature changes continuously.
Approximately 5seconds after the last time a sensor button was touched, the actual temperature inside the appliance will automatically be displayed.

Temperature range

– The temperature in the Fridge Zone
can be set between 36°F (2°C) and 45°F (7°C).
– The temperature in the Freezer Zone
can be set between 7°F(-14°C) and
-15°F (-27°C).
Tip: If you have adjusted the tempera­ture, wait for approx. 6hours if the
machine is not very full and for ap­prox. 24hours if the machine is full
before checking the temperature dis­play. It will take this long for an accurate reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it again.
25

Using Automatic SuperCool and SuperFreeze

The following functions are available depending on the section:
– Refrigerator section
Automatic SuperCool
– Freezer section
SuperFrost

SuperFrost function

For best results, turn on the SuperFrost function before putting fresh food into the freezer. Fresh food will be frozen quickly, so that the nutritional value, vi­tamin content, appearance, and taste are maintained.

Exceptions:

– Placing food in the freezer that is al-
ready frozen.
– Only freezing up to 4.4lbs (2kg) of
fresh food daily.
SuperFrost should be turned on
6hours before placing food in the freezer section. When freezing the maximum amount of food, SuperFrost should be turned
on 24hours beforehand.
When SuperFrost is turned on, the ma­chine will work at full power to lower the temperature inside.
SuperFrost turns off automatically after approx. 65hours. The quantity of fresh food placed in the freezer will determine the duration before the SuperFrost function turns off.
Tip: To save energy, you can manually turn off SuperFrost once the freezer reaches a constant freezer section temperature of 0°F (-18°C) or colder. Monitor the temperature in the freezer section.
When the SuperFrost function is turned off, the machine will run at normal power again.

Exceptions:

– Placing food in the freezer that is al-
ready frozen.
– Only freezing up to 4.4lbs (2kg) of
fresh food daily.
SuperFrost should be turned on
6hours before placing food in the freezer section. When freezing the maximum amount of food, SuperFrost should be turned
on 24hours beforehand.
When SuperFrost is turned on, the ma­chine will work at full power to lower the temperature inside.
SuperFrost turns off automatically after approx. 65hours. The quantity of fresh food placed in the freezer will determine the duration before the SuperFrost function turns off.
Tip: To save energy, you can manually turn off SuperFrost once the freezer reaches a constant freezer section temperature of 0°F (-18°C) or colder. Monitor the temperature in the freezer section.
When the SuperFrost function is turned off, the machine will run at normal power again.
26
Using Automatic SuperCool and SuperFreeze

Automatic SuperCool function

The Automatic SuperCool function can be used to rapidly reduce the tempera­ture in the refrigerator section to its low­est setting (depending on the room temperature).
Tip: Automatic SuperCool is particularly recommended for the rapid chilling of large amounts of fresh food or drink.
When Automatic SuperCool is turned on, the machine will work at full power to lower the temperature inside.
It turns off automatically after approx. 12hours.
Tip: To save energy, the Automatic Su­perCool function can be turned off manually once food and drink is suffi­ciently chilled.
When the Automatic SuperCool func­tion is turned off, the machine will run at normal power again.

Turning a function on or off

Touch the sensor button for the func-
tion you want.
– The display LED next to the corre-
sponding symbol will light up and the function will be turned on.
– The display LED next to the corre-
sponding symbol will go out and the function will be turned off.
After a power failure, any function that was previously turned on will be turned off.
27

Temperature and door alarm

Your machine is equipped with a warn­ing system to ensure that temperature increases in the freezer section do not go unnoticed and it also prevents en­ergy from being wasted when machine doors are left open.

Temperature alarm

An alarm will sound if the temperature in the freezer section becomes too warm. The display LED flashes.
The audio and visual signals are trig­gered, for example:
– when the machine is turned on if the
temperature in a temperature zone differs too significantly from the set temperature,
– if a lot of warm room air enters the
freezer when food is being loaded, rearranged, or taken out,
– when freezing large amounts of food
at once,
– when freezing fresh food which is still
warm,
– after a power failure,

Turning the temperature alarm off early

If the alarm disturbs you, it can be turned off early.
Touch the sensor button. The alarm will be silenced. The dis-
play LED will continue to flash until the reason for the alarm has been resolved.

Door alarm

The machine is fitted with a warning system to avoid energy being wasted and food becoming warm if the ma­chine door is left open.
An alarm will sound if the machine door has been left open for longer than 180seconds.
As soon as the door is closed, the alarm will be silenced and the display will go out.

Turning the door alarm off early

If the alarm disturbs you, it can be turned off early.
Touch the sensor button.
– if the machine has a fault.
The alarm will be silenced and the dis­play will go out as soon as the reason for the alarm has been resolved.
If the temperature in the freezer
remains above 0°F (-18°C) for a long time, check that the frozen food has not started to defrost.
If it has, use the food as soon as possible or cook it before freezing it again.
28
The alarm will be silenced.

Selecting additional settings

Selecting additional settings

In Settings mode, certain settings can be adjusted and functions selected, al­lowing you to adjust the machine to suit your requirements.
See the following pages for more infor­mation on these settings.
The door alarm and any other alarm messages are automatically sup­pressed when you are in Settings mode, and no alarm will sound. Ex­ception: If there is a machine fault (F +numbers), Settings mode will be ex­ited automatically. The fault code will be shown on the display and an alarm will sound (see “Frequently asked questions”) – Messages on the dis­play“).
The freezer section control panel (to the right-hand side of the display) must be used to apply the desired set­tings.

Settings overview

Turning Sabbath mode on and off
Setting the display brightness
Activating and deactivating the safety lock
Changing the temperature unit (°F/°C)
For the Service department only! Ice cube maker functional test
Changing the size of the ice cubes

Sabbath mode

The appliance offers a Sabbath mode for the purposes of religious obser­vance.
The following are turned off:
– the interior lighting when the appli-
ance door is opened,
– all audio and visual signals,
– temperature displays,
– DynaCool, Automatic SuperCool, and
SuperFrost (if previously turned on).
To activate Settings mode, the Super­Frost button can continue to be se­lected.
The Sabbath mode function will turn off automatically after approx. 120hours.
29
Loading...
+ 67 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use