Operating and installation instructions
Fridge-freezer
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en–AE, SAM.-Nr. 10 865 960
Contents
Warning and Safety instructions.......................................................................... 5
Caring for the environment ................................................................................ 13
How to save energy............................................................................................. 14
Guide to the appliance........................................................................................ 16
Control panel......................................................................................................... 16
Display LEDs and symbols in the display ............................................................. 17
Changing the door hinging ................................................................................. 70
Aligning the appliance doors.............................................................................. 82
4
Warning and Safety instructions
This appliance complies with all statutory safety requirements.
Please note that inappropriate use can lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these
instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
Correct application
This refrigeration appliance is intended for use in the home and in
similar environments, for example
– in shops, offices and similar work settings
– by the guests in hotels, motels, bed & breakfasts and other typical
home settings.
This refrigeration appliance is not intended for outdoor use.
This appliance is intended for domestic use only for cooling and
storing food and drink as well as for storing deep frozen food,
freezing fresh food and for making ice.
Any other usage is not supported by the manufacturer and could be
dangerous.
This appliance is not suitable for storing and keeping cool
medicines, blood plasma, laboratory preparations or other such
materials or products. Incorrect use of the appliance for such
purposes can cause deterioration of the items stored. The appliance
is not suitable for use in areas where there is a risk of explosion.
Miele cannot be held liable for damage resulting from improper or
incorrect use of the appliance.
5
Warning and Safety instructions
The appliance can only be used by people with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised whilst using it, or have been shown how to use
it in a safe way and recognise and understand the consequences of
incorrect operation.
Safety with children
Children under 8 years of age must be kept away from the
appliance unless they are constantly supervised.
Children 8 years and older may only use the appliance
unsupervised if they have been shown how to use it in a safe way
and recognise and understand the consequences of incorrect
operation.
Children must not be allowed to clean or maintain the appliance
unsupervised.
Please supervise children in the vicinity of the appliance and do
not let them play with it.
Danger of suffocation! Whilst playing, children could become
entangled in packaging (such as plastic wrapping) or pull it over their
head and suffocate. Keep packaging material away from children.
6
Warning and Safety instructions
Technical safety
The coolant system is tested for leaks. This appliance complies
with statutory safety requirements and the appropriate EU
guidelines.
This appliance contains the coolant Isobutane (R600a), a natural
gas which is environmentally friendly. Although it is flammable, it
does not damage the ozone layer and does not increase the
greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the
compressor, you might be able to hear the coolant flowing around
the system. This is unavoidable, and does not have any adverse
effect on the performance of the appliance.
Care must be taken during the transportation and setting up of the
appliance that no parts of the cooling system are damaged. Leaking
coolant can damage the eyes.
In the event of any damage:
– avoid naked flames or anything which creates a spark,
– disconnect the appliance from the mains electricity supply,
– ventilate the room where the appliance is located for several
minutes, and
– contact your Miele dealer.
7
Warning and Safety instructions
The more coolant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the
appliance is in a small room, there is the danger of combustible
gases building up. For every 11 g of coolant at least 1m3 of room
space is required. The amount of coolant in the appliance is stated
on the data plate inside the appliance.
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.
The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
If moisture gets into electrical components or into the mains
connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or utility room).
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
8
Warning and Safety instructions
The appliance must be isolated from the electricity supply during
installation, maintenance and repair work.
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.
While the appliance is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.
Correct use
The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range.
The climate range for your appliance is stated on the data plate
inside the appliance. Installing it in a room with too low an ambient
temperature, e.g. a garage, will lead to the appliance switching off
for longer periods so that it cannot maintain the required
temperature.
Do not cover or block the air vents as this could impair the
efficiency of the appliance, increase the electricity consumption and
could cause damage to the components.
If storing food which contains a lot of fat or oil in the appliance or
the door, make sure that it does not come into contact with plastic
components as this could cause stress cracks or break the plastic.
9
Warning and Safety instructions
Do not store explosive materials in the appliance or any products
containing propellants (e.g. spray cans). Electrical components could
cause flammable vapours to ignite. Danger of fire and explosion.
Do not operate any electrical equipment (e.g. an electric ice cream
maker) inside the appliance. Danger of sparking and explosion.
Do not store cans or bottles containing carbonated drinks or
liquids which could freeze in the freezer. The cans or bottles could
explode. Danger of injury and damage to the appliance.
When cooling drinks quickly in the freezer, make sure bottles are
not left in for more than one hour; otherwise they could burst,
causing injury or damage.
Never handle frozen food or the metal parts of the appliance with
wet hands. Your hands may freeze to the frozen food or to the metal.
Danger of frost burn.
Do not take ice cubes out with your bare hands and never place
ice cubes or ice lollies in your mouth straight from the freezer. The
very low temperature of the frozen ice or lollies can cause frost burn
to the lips and tongue.
Do not refreeze partially or fully defrosted food. Consume
defrosted food as soon as possible, as it will lose its nutritional value
and spoil if left for too long. Defrosted food may only be re-frozen
after it has been cooked.
Observe the manufacturer's “use-by” dates and storage
instructions given on food to avoid the risk of food poisoning.
Storage times will depend on several factors, including the freshness
and quality of the food, as well as the temperature at which it is
stored.
Only use genuine original Miele accessories and spare parts with
this appliance. Using accessories or spare parts from other
manufacturers will invalidate the warranty, and Miele cannot accept
liability.
10
Warning and Safety instructions
Stainless steel appliances
Adhesives will damage the stainless steel surface and cause it to
lose its dirt-repellent protective coating. Do not use sticky notes,
transparent adhesive tape, masking tape or other types of adhesive
on the stainless steel surface.
The surface is susceptible to scratching. Even magnets can cause
scratching.
Cleaning and care
Do not use any oils or grease on the door seals, as these will
cause the seals to deteriorate and become porous with time.
Do not use a steam cleaning appliance to clean or defrost this
appliance.
Steam could reach electrical components and cause a short circuit.
Sharp edged or pointed objects will damage the evaporator,
causing irreversible damage to the appliance. Do not use sharp
edged or pointed objects to
– remove frost and ice,
– separate frozen foods or remove ice trays.
Do not place electric heaters or candles in the appliance to
defrost it. These can damage the plastic parts.
Do not use defrosting sprays or de-icers, as they could contain
substances which could damage the plastic parts or which might
cause the build-up of gases and pose a danger to health.
Transporting the appliance
Always transport the appliance in an upright position and in its
original transport packaging to avoid damage in transit.
Danger of injury and damage. The appliance is very heavy and
must be transported by two people.
11
Warning and Safety instructions
Disposal of your old appliance
Before disposing of an old appliance, first make the door latch or
lock unusable.
This way you will prevent children from accidentally locking
themselves in and endangering their lives.
Splashes of coolant can damage the eyes. Be careful not to
damage any part of the pipework whilst awaiting disposal, e.g. by
– puncturing the coolant channels in the condenser,
– bending any pipework, or
– scratching the surface coating.
Symbol on the compressor (depending on model)
This information is only relevant for recycling. In normal operation there is no risk.
The oil in the compressor can be fatal if swallowed or if it
penetrates the airways.
12
Caring for the environment
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances, or contact your Miele dealer
for advice. You are also responsible (by
law, depending on country) for deleting
any personal data that may be stored
on the appliance being disposed of.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak into the
environment.
Please ensure that your old appliance
presents no danger to children while
being stored awaiting disposal. See
“Warning and Safety instructions” for
more information.
13
How to save energy
Installation /
Maintenance
Temperature
setting
Normal energy
consumption
In a ventilated room.In an enclosed, unventilated
Protected from direct
sunlight.
Not near to a heat source
(radiator, oven).
Where the ideal ambient
room temperature is approx.
20 °C.
Ventilation gaps uncovered
and dusted regularly.
Compressor and metal grille
(heat exchanger) at the back
of the appliance dusted at
least once a year.
Refrigerator section 4 to
5°C
Freezer section -18°C
Increased energy
consumption
room.
In direct sunlight.
Near to a heat source
(radiator, oven).
Where the ambient room
temperature is above 25°C.
Ventilation gaps covered or
dusty.
Dust build-up on the
compressor and metal grille
(heat exchanger).
The lower the temperature,
the higher the energy
consumption.
14
How to save energy
Normal energy
consumption
UseDrawers and shelves
arranged as they were when
the appliance was delivered.
Only open the door when
necessary and for as short a
time as possible. Store food
in an organised way.
Take an insulated cool bag
when shopping and load
food in the appliance as
soon as possible.
Replace any food removed
as quickly as possible,
before it begins to thaw.
Allow hot food and drinks to
cool down before placing
them in the appliance.
Store food covered or
packaged.
Increased energy
consumption
Frequent opening of the
door for long periods will
cause a loss of coldness.
The appliance will cool down
and the compressor will run
for longer periods.
Hot food or food at room
temperature raises the
temperature inside the
appliance. The appliance will
cool down and the
compressor will run for
longer periods.
The evaporation or
condensation of liquids will
cause a loss of coldness.
Place frozen food in the
refrigerator to defrost.
Do not over-fill the appliance
to allow air to circulate.
Poor air circulation will
cause a loss of coldness.
15
Guide to the appliance
Control panel
Sensor controls for refrigerator
section
a
For switching the DynaCool function
on and off
b
For switching the SuperCool function
on and off
c
On sensor for the whole appliance/
Off sensor for the refrigerator section
d
For setting the temperature
( for warmer)
e
For setting the temperature
( for colder)
f
Display LEDs (see “Display LEDs”
table for explanation)
g
Display with temperature and
symbols (symbols only visible during
use; see “Symbols in the display”
table for explanation)
Sensor controls for the freezer
section
h
For setting the temperature
( for warmer)
i
For setting the temperature
( for colder)
j
For switching the whole appliance on
and off
k
For switching the Super freeze
function on and off
l
For switching the door or
temperature alarm off in the event of
a power cut
16
Guide to the appliance
Display LEDs and symbols in the display
Display LEDMeaning
Super cool symbol (on
the left)/ Super freeze
symbol (on the right)
Power failureFlashes during a power cut
Safety lockLock to prevent the appliance from being
DynaCoolFunction can be selected (see “Using Super
AlarmFlashes when the door or temperature alarm
Message/symbol in the displayMeaning
DEMODemo modeDemo mode has been activated (see
MENUSettings modeLights up when settings are being selected
°CTemperature unitThe factory default setting is °C; this can be
Function can be selected depending on
section (see “Using Super cool, Super freeze
and DynaCool”).
switched off by mistake
cool, Super freeze and DynaCool”).
is triggered
“Problem solving guide - Display warnings”).
changed to °F
17
Guide to the appliance
a
Control panel with display
b
Interior lighting
c
Fan
d
Bottle rack
e
Door shelf / Egg tray
f
Holder with active charcoal filter
(Active AirClean)
g
Adjustable shelf
h
Fruit and vegetable containers
i
Bottle shelf with bottle holder
j
Frost Free module
k
Freezer drawers
For easier installation there are
transport handles on the back at the
top and transport wheels underneath
the appliance.
This drawing is for illustration purposes only.
18
Accessories
Accessories supplied
Egg tray
Butter dish
Bottle rack
Bottle holder
Attach the bottle holder to the rear edge
of the bottle shelf.
The bottle holder can be moved left or
right. This way the bottles will be more
secure when the appliance door is
opened and closed.
KKF-FF Active AirClean charcoal
filters with holder
Bottles can be stored horizontally using
the bottle rack to save space.
The bottle rack can be placed at
different positions in the refrigerator
section.
The charcoal filters neutralise
unpleasant odours in the refrigerator
section for improved air quality.
19
Accessories
Ice cube tray
Cool pack
The cool pack prevents the temperature
in the freezer rising too quickly in the
event of an interruption to the power
supply. This can help prolong the
storage time.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Optional accessories
A range of useful Miele accessories and
care products are available for your
appliance.
Stainless steel care
The stainless steel cleaning cloth is
impregnated with stainless steel
conditioner for optimum cleaning and
protection.
Each application of the stainless steelconditioner (supplied in a bottle) forms
a water and dirt repellent protective
coating. It gently removes water marks,
fingerprints and other dirt for a
uniformly shiny surface.
Multi-purpose microfibre cloth
The microfibre cloth is suitable for
removing fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
20
MicroCloth Kit
The MicroCloth Kit contains a universal
cloth, a glass cloth and a polishing
cloth.
These cloths are extremely rip-proof
and hard-wearing. Thanks to very fine
microfibres these cloths achieve
excellent cleaning results.
KKF-RF
ActiveAirClean replacement filters
Replacement filters to the fit the Active
AirClean holder are available. We
recommend replacing the charcoal
filters every 6months.
KKF-FF Active AirClean charcoal
filters with holder
Charcoal filters neutralise unpleasant
odours in the refrigerator section for
improved air quality.
Accessories
The charcoal filter holder clips onto the
protective strip at the back of the shelf
and can be moved as necessary.
Accessories are available to order
from your Miele dealer.
21
Before using for the first time
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation. The
appliance doors, and side panels where
applicable, have a protective foil.
Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning the appliance
Please refer to the relevant
instructions in “Cleaning and care”.
Important! Each time it is used, the
Miele stainless steel conditioning
agent forms a water-repellant and dirtrepellant protective coating.
Treat the stainless steel trim and
frames inside the appliance with the
Miele stainless steel conditioning
agent immediately after removing the
protective foil (see “Guide to the
appliance – Optional accessories”).
Clean the inside of the appliance and
the accessories.
22
Switching on and off
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
The freezer section and the refrigerator
section can be switched on at the same
time using the two On/Off controls.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for approx.
3-5hours (depending on ambient
temperature) before placing food in it.
Do not place food in the freezer until it
has reached the required coldness (at
least -18°C).
Touch one of the two On/Off
controls until the temperature display
lights up.
The appliance will be switched on and
the interior lighting will come on in the
refrigerator section.
The temperature display for the
refrigerator section indicates the
temperature in the refrigerator section.
– If the temperature in the freezer
section is above 0°C, dashes will
flash in the temperature display for
the freezer section.
– As soon as the temperature drops
below 0°C the temperature in the
freezer section will flash in the
display.
– The display LED will flash until the
set temperature has been reached in
the freezer section.
The appliance will gradually reach the
pre-set temperatures:
– Temperature in the refrigerator
section= 2°C
– Temperature in the freezer
section=-18°C
23
Switching on and off
Switching off the whole
appliance
Touch the right-hand On/Off
control until all of the indicators go
out.
If this is does not happen, the safety
lock is still activated (see "Selecting
further settings - Activating and
deactivating the safety lock). The
refrigerator section interior lighting will
go out and the cooling process will be
switched off.
Switching off the refrigerator section
separately
The refrigerator section can be
switched off without having to switch
off the freezer section. The freezer
section cannot be turned off separately.
Touch the left-hand On/Off control
until the temperature display for the
refrigerator section goes off.
If this is does not happen, the safety
lock is still activated (see "Selecting
further settings - Activating and
deactivating the safety lock).
The refrigerator section is switched off.
The temperature in the freezer section
will still be shown in the display. The
refrigerator section interior lighting will
go out.
Switching the refrigerator section on
separately (if previously switched off)
Touch the left-hand On/Off control
to switch on the refrigerator section.
The refrigerator section will be switched
on and will start to cool down. It will
reach the set temperature. The interior
lighting will come on when the
refrigerator section door is opened.
Switching off for longer
periods of time
If, during a long absence, the
appliance is switched off but not
cleaned and the door(s) left shut,
there is a danger of mould building
up inside the appliance.
It is essential to clean the appliance.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
switch the appliance off,
disconnect it from the mains,
clean the appliance and
leave the door(s) ajar to air the
appliance and avoid odours building
up inside the appliance.
It is also advisable to carry out the last
two instructions if you are switching
the refrigerator section off for a longer
period of time.
24
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing the
temperature reduces their growth rate.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– the more food that is stored in it,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance. The
appliance is designed for use within
specific ambient temperatures
(climate range). Do not use in
ambient temperatures for which it is
not designed.
. . . in the refrigerator section
We recommend a temperature of 4°C
in the refrigerator section.
. . . in the freezer section
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18°C is required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
temperature rises above -10°C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or fully defrosted food must not be refrozen. Food may be re-frozen once it
has been cooked, as the high
temperatures achieved when cooking
destroy most micro-organisms.
25
The correct temperature
Temperature display
In normal operation the upper
temperature display shows the
average, current temperature in the
refrigerator section and the lowertemperature display the highest
temperature in the freezer section.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature in the display.
If the temperature in the freezer
remains above -18°C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
Setting the temperature
Use the and arrow sensors to
set the temperature higher or lower.
The following information shows in the
display while the sensors are being
touched:
– Touching a sensor once: the last
temperature selected flashes.
– Each subsequent touch of the
sensor: adjusts the temperature
shown in 1°C increments.
– Keeping a finger on the sensor
changes the temperature
continuously.
Approximately 5 seconds after the last
time a sensor has been touched, the
current temperature inside the
appliance is automatically shown.
26
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.