Fully Integrated
www.goedekers.com
36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
8mieleusa.com
Fully Integrated 36” Bottom Mount
www.goedekers.com
KF 1913 Vi / KF 1903 Vi
FOR FLUSH INSTALLATION
25" min.*
O
36"
W
84"
24 5/8"
E
10 1/4"
35 3/4"
UNIT ACCEPTS
TWO (2) CUSTOM
FRONT PANELS
83 1/2" - 85 3/8"
Location Codes
5 foot - 120 Volt - 15 Amp 3-wire molded plug power
E -
supply connects lower left rear
Standard NEMA 5-15 Duplex Outlet - locate less than
O -
9" above finished floor
1/4" flexible water line - tape to floor
W -
Notes
• All Installations must be done in accordance with local codes
• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish
• For Proud Installation - please adjust accordingly
* Depth assumes a 3/4” panel, please adjust according to
custom panel thickness
1 1/8"
4 1/8"
"8/3 8 - "2
"2/1 8 - "8/5 6
KF 1913 Vi / KF 1903 Vi
Page 2 of 5
Fully Integrated 36” Bottom Mount
www.goedekers.com
KF 1913 Vi / KF 1903 Vi
LOWER HINGE LOCATION
Hinge
Upper Door
Lower Drawer
FRONT VIEW
Hinge
29 11/16"
29 1/8 - 29 1/2"
1/2" - 2 3/8"
KF 1913 Vi / KF 1903 Vi
Page 3 of 5
Fully Integrated 36” Bottom Mount
www.goedekers.com
KF 1913 Vi / KF 1903 Vi
CUSTOM PANEL INSTALLATIONS
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Width: 35 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Notes: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
HOM
considered in height calculation
Upper Panel
Lower Panel
Panel Height
Panel "B" Height
TKH
Upper Maximum panel weight: 83.8 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM =Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:31 Pounds
Upper Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Extended Panel Example:
Machine
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
KF 1913 Vi / KF 1903 Vi
Page 4 of 5
Fully Integrated 36” Bottom Mount
rooD °511rooD °09
www.goedekers.com
KF 1913 Vi / KF 1903 Vi
HINGING DETAILS
Door Swing
1-1/2"
Cabinet Front
1"
1-1/4"
0-1/8"
0-3/4"
F
ro
nt
Pa
n
el
snoitpo ssenkcihTsnoitpo ssenkcihT
0-1/8"
0-3/4"
1-1/4"
1-3/4"
1-1/4"
1-1/2"
0-3/4"
1-3/4"
1"
2"
Cabinet Front
0-3/4"
Front Panel
1"
1-1/4"
1-1/2"
1-1/2"
1"
Door Swing
7/16"
16 7/8"
MAX
38 11/16"
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Additional space needed depending on
thickness of front panels and handle used
KF 1913 Vi / KF 1903 Vi
Page 5 of 5
Loading...