Page 1
Fully Integrated
36” Refrigerator
K 1913 Vi / K 1903 Vi
8mieleusa.com
Page 2
Fully Integrated 36” Refrigerator
K 1913 Vi / K 1903 Vi
FOR FLUSH INSTALLATION
25" min.*
O
36"
84"
24 5/8"
E
10 1/4"
83 1/2" - 85 3/8"
35 3/4"
UNIT ACCEPTS
A CUSTOM
FRONT PANEL
Location Codes
5 foot - 120 Volt - 15 Amp 3-wire molded plug power
E -
supply connects lower left rear
Standard NEMA 5-15 Duplex Outlet - locate less than
O -
9" above finished floor
Notes
• All Installations must be done in accordance with local codes
• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish
• For Proud Installation - please adjust accordingly
* Depth assumes a 3/4” panel, please adjust according to
custom panel thickness
1 1/8"
4 1/8"
"8/3 8 - "2
"2/1 8 - "8/5 6
K 1913 Vi / K 1903 Vi
Page 2 of 4
Page 3
Fully Integrated 36” Refrigerator
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
K 1913 Vi / K 1903 Vi
CUSTOM INSTALLATIONS
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Miele
Fully Integrated
Refrigerator
Panel Height
HOC
Width: 35 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Height: Determined using the following calculation:
Panel Height = HOC - TKH
HOC = Total height of cabinet or side panel
TKH = Toe-kick height
Note: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Maximum panel weight: 81.6 Pounds
TKH
Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the front panel may be extended accordingly.
Simply maintain the toekick height and extend the panel the needed distance.
Adjoining cabinet
Extended Panel
Machine
K 1913 Vi / K 1903 Vi
Page 3 of 4
Page 4
Fully Integrated 36” Refrigerator
rooD °511rooD °09
K 1913 Vi / K 1903 Vi
HINGING DETAILS
Door Swing
snoitpo ssenkcihTsnoitpo ssenkcihT
0-1/8"
0-3/4"
1-1/4"
1-3/4"
1-1/4"
1-1/2"
0-3/4"
1-3/4"
1"
2"
Cabinet Front
0-3/4"
Front Panel
1"
1-1/4"
1-1/2"
1-1/2"
1"
Cabinet Front
1-1/4"
1-1/2"
0-1/8"
0-3/4"
F
ro
nt
1"
Pa
n
el
Door Swing
7/16"
38 11/16"
NOTE: Additional space needed depending on
thickness of front panels and handle used
16 7/8"
MAX
NOTE: Additional space needed depending on
thickness of front panels and handle used
K 1913 Vi / K 1903 Vi
Page 4 of 4
Loading...