Miele HR 1934 DF Specification
36” Dual Fuel Range
Model: HR 1934 DF / HR 1934 DF LP
SPECIFICATIONS
HR 1934 DF — Item 25193451USA
HR 1934 DF LP — Item 25193452USA
HR 1934 DF / HR 1934 DF LP
Features:
M Touch controls and backlit precision
knobs
ComfortLift panel
M Pro dual stacked burner system with
TrueSimmer
ComfortClean dishwasher-safe grates
TwinPower Convection fans
21 Operating modes including
Self Clean
Moisture plus
MasterChef and MasterChef Plus
automatic programs
Wireless roast probe
Soft Close and Soft Open
™
Clean Touch Steel
front
Overall Unit Width - Excluding Fascia Dimension 35
Overall Height - Excluding Fascia Dimension 35
Overall Unit Depth to front of control panel 26
Oven Door Clearance 22
Niche
Minimum Cabinet Niche Width
Minimum Cabinet Opening Height 35
Burners
Gas Burners: (1) 12,500 BTU; (5) 19,500 BTU
Totl BTU Output 110,000 BTU
Gas Line Connection 1/2” NPT
Plumbing
Water Supply Requirements
15
/16” (913mm)
1
/2” — 37” (901.7 — 939.8mm)
1
/2” (673mm)
3
/4” (577mm)
36” (914mm)
1
/2” (901.7mm)
Connect to a cold water supply only. Must
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 14.5 psi (1 bar) and may not
exceed 145 psi (10 bar). If the pressure is
higher than 145 psi (10 bar), a pressure
reducing valve must be installed. The
supplied hose has a length of 4’11” (1.5m).
The hose must not be shortened. The entire
hose length must not exceed 24’7” (7.5m).
Supplied hose: flexible braided 4’11” (1.5m)
3
Plumbed Hose Connection
Electrical
Electrical Requirements
Power Cord Yes - NEMA 14-30 plug, 5’ 11” (1.8m) long
Shipping
Shipping Weight 438.7 lbs. (199kg)
Shipping Dimensions
Support
Call Miele 800.843.7231
Miele Website
20/20 Link
/8” O.D. fitting for connection to a shut
with
off valve
120V / 240V, 60Hz, 30 Amps
120V / 208V, 60Hz, 30 Amps
435/16” (1100mm) W x 52” (1,294mm) H x 31
1/2” (800mm) D
8www.mieleusa.com
82020technologies.com
Specication Sheet TRS 04132015
36” Dual Fuel Range
Model: HR 1934 DF / HR 1934 DF LP
PRODUCT VIEWS
Isometric
(x) = Toe-kick height adjustment 4” — 51/2” (101.6 — 139.7mm)
HR 1934
Page 2 of 6
Specication Sheet TRS 04132015
Loading...