Miele F 1911 Vi, F 1901 Vi Specification

Product and Cut-out Dimensions
F1911Vi / F1901Vi

25" min.

O

36"

W

84"

35 3/4"

24"

UNIT ACCEPTS

A CUSTOM

FRONT P ANEL

Location Codes

5 foot - 120 Volt - 15 Amp 3-wire molded plug power

E -

supply connects lower left rear.
Standard NEMA 5-15 Outlet - locate less than 9" above

O -

finished floor
1/4" flexible water line - tape to floor

W -

Notes

• All Installations must be done in accordance with local codes

• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish

E

83 1/2" - 85 3/8"

9 1/2"

1 1/4"

4 1/8"

2" - 8 3/8"

6 5/8" - 8 1/2"

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 150209

Front Panel Information
Fully Integrated Model

Custom Panel Installations

These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.

Panel size is determined in the following manner:

Miele

Fully Integrated

Freezer

HOC

Panel Height

Width: 35 3/4" in all cases
Thickness: Minimum 3/4" outside frame
Height: Determined using the following calculation:

Panel Height = HOC - TKH

HOC = T otal height of cabinet or side p anel
TKH = T oe-kick height

Note: Finish back side of panels to insure appearance

Panel may extend above unit. This is not
considered in height calculation

Maximum hinge capacity: 200 Pounds
Maximum panel weight: 67 Pounds

TKH

Panel Notes

If the adjoining cabinets are taller than the height of machine (HOM) - the front panel may be extended accordingly.
Simply maintain the toekick height and extend the panel the needed distance.

Adjoining cabinet

Extended Panel

Machine

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 150209