Miele DA2390 Specifications

36” Extra-Slim Insert Hood

DA 2390 Stainless Steel

Specification Sheets TRS 07202017

8mieleusa.com

36” Extra-Slim Insert Hood
DA 2390 Stainless Steel

SPECIFICATIONS

DA 2390 — Item 28239055USA

Overall Unit Width 34

Overall Unit Height 13

Overall Unit Depth 11

Built-In

Minimum Opening Width 34

DA 2390
Features:

• Extra-slim insert ts in less than 12”
upper cabinetry

• Integrated LED ClearView lighting

• Straight stainless steel canopy

• Front-mounted backlit controls

• Designed for vented or recirculated

use

• For wall cabinet installation

• Removable, dishwasher-safe

stainless steel lters

• Front mounted controls for lights and
4 fan speeds including intensive

• Automatic shut-off of intensive level,
programmable for 10 minutes

Minimum Opening Depth 10

Minimum Opening Height 12

Fan

Fan Speeds 4

Maximum CFM

Duct

Duct Diameter 6” (150 mm)

Electrical

Electrical Requirements 120V, 60Hz, 15A

Power Cord Molded NEMA 5-15 plug, 2.5 ft (0.75 m)

Shipping

Shipping Weight 24 lbs (11 lbs)

Shipping Dimensions 26

Support

Call Miele [phone]

Miele Website

20/20 Link

11

/16” (884 mm)

5

/16” (338 mm)

11

/16” (297 mm)

1

/16” (865 mm)

7

/8” (276 mm)

5

/8” (320 mm)

625 CFM, (Reducing Collar is available to
reduce Air flow to less than 400 CFM, more
information on page 7)

3

/4” W x 1615/16” H x 1615/16” D

8www.mieleusa.com

82020technologies.com

Installation Accessories:

DUU 150

Recirculation kit

DUU 151

Recirculation kit

DKF19-1

OdorFree Charcoal lter

required accessory for

recirculation mode

Reducing collar

Reducing collar limits air

ow to less than 400 CFM

Specification Sheets TRS 07202017

DAA6

6” Trim Kit

DA 2390 Stainless Steel

Page 2 of 8

36” Extra-Slim Insert Hood
DA 2390 Stainless Steel

INSTALLATION SPECIFICATIONS

Product Details

Cut-Out Details

The ducting can also be connected at the back.
The ventilation system is fastened in the cut-out using clamps. A solid installation surface, e.g., made of wood, is
required. Make sure that the structure can support the load. Around the clamps, components such as supports and
ducting must be at least 1” (25 mm) from the cut-out.
Alternatively, the ventilation system can be secured to four xing points on an interim shelf.
There are additional xing points on the installation surface.

Specification Sheets TRS 07202017

DA 2390 Stainless Steel

Page 3 of 8