en Burner
Cleaning instructions
zh
M.-Nr. 10 742 130
en ....................................................................................................................... |
3 |
zh ....................................................................................................................... |
5 |
2
en - Cleaning the burners
Do not clean any parts of the burners in a dishwasher.
Remove all loose components of the burners and clean only by hand using a solution of warm water and a little washing-up liquid applied with a soft sponge.
Clean any soiling from the flame openings with the brush supplied.
Danger of explosion!
Blocked flame openings can cause a dangerous build-up of gas in the base of the hob which could ignite and cause an explosion. This can lead to damage to the appliance and injury.
Ensure the flame openings are kept clean at all times.
Parts of the burner that cannot be removed should be wiped clean with a damp cloth only.
The ignitor and thermocouple should be very carefully wiped clean using a well wrung out cloth.
The ignitor must not get wet, otherwise it will not spark.
Finally dry everything thoroughly with a clean cloth. Make sure that the flame openings are completely dry.
The surface of the burner cap will become duller with time. This is completely normal and does not indicate material deterioration.
3
Loading...