CK-100_QUG_with_FCC&IC_en1.fm Page 1 Wednesday, April 30, 2008 12:26 PM
Nokia Car Kit CK-100
9210123/1
CK-100_QUG_with_FCC&IC_en1.fm Page 2 Wednesday, April 30, 2008 12:26 PM
ENGLISH
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Navi and
the Nokia Original Accessories logo are
trademarks or registered trademarks of
Nokia Corporation. Other product and
company names mentioned herein may be
trademarks or tradenames of their respective
owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Export controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
For your safety
Read these simple guidelines. Not
following them may be dangerous or
illegal.
This product may contain small parts.
Keep them out of the reach of small
children.
SWITCH ON SAFELY
Do not switch the device on
when wireless phone use is
prohibited or when it may cause
interference or danger.
ROAD SAFETY COMES
FIRST
Obey all local laws. Always
keep your hands free to operate the
vehicle while driving. Your first
consideration while driving should be
road safety.
INTERFERENCE
All wireless devices may be
susceptible to interference,
which could affect performance.
CK-100_QUG_with_FCC&IC_en1.fm Page 3 Wednesday, April 30, 2008 12:26 PM
ENGLISH
SWITCH OFF IN RESTRICTED
AREAS
Follow any restrictions. Switch
the device off near fuel, chemicals, or
blasting areas.
QUALIFIED SERVICE
Only qualified personnel may
install or repair this product.
ENHANCEMENTS
Use only approved
enhancements. Do not connect
incompatible products.
Introduction
This quick user guide describes the
basic features of the car kit.
Read carefully the complete user and
installation guide on the CD that is
supplied with the car kit. It contains,
for example, troubleshooting tips and
important safety and maintenance
information.
Have the car kit installed by a
qualified service technician. To use the
car kit, you must pair and connect it
with your compatible device using
Bluetooth wireless technology. See
the user and installation guide for
details.
Read the user and installation
guide
To view the user and installation
guide, you need a PC that has the
Windows XP or Vista operating system
and a compatible CD or DVD drive. You
also need to have the Adobe Reader
application on the PC.
Place the CD in the drive on your PC.
Wait until the installation program
starts automatically (if the CD-ROM
CK-100_QUG_with_FCC&IC_en1.fm Page 4 Wednesday, April 30, 2008 12:26 PM
ENGLISH
autorun feature is enabled in
Windows). Select your language and
the user and installation guide.
Get started
Input device
You can operate the car kit using the
input device CU-11 shown at the start
of this guide. The device is provided
with the Navi
turn or press.
Turn the wheel to adjust the volume
when you are using the mobile phone
or music device connected to the car
kit.
Press the wheel for other tasks, for
example, to handle calls.
TM
wheel that you can
Switch on
If the ignition sense wire is connected,
turn on the car ignition.
If the ignition sense wire is not
connected, press and hold the Navi
wheel for about 2 seconds.
Alternatively, turn on the ignition,
start driving, and wait until the builtin motion sensor switches the car kit
on automatically.
Switch off
If the ignition sense wire is connected,
turn off the car ignition.
If the ignition sense wire is not
connected and you are not using your
phone connected to the car kit for
calling, close the Bluetooth
connection to your phone and music
device.
CK-100_QUG_with_FCC&IC_en1.fm Page 5 Wednesday, April 30, 2008 12:26 PM
ENGLISH
After you turn off the car ignition, do
not leave your mobile phone or music
device connected to the car kit to
prevent accidental draining of the car
battery.
Operation
Calls
To make a call, use your mobile phone
in the normal way when the car kit is
connected to it.
To redi al t he n umb er y ou la st c all ed (if
your phone supports this feature with
the car kit), press the Navi wheel twice
when no call is in progress.
To activate voice dialling (if your
phone supports this feature with the
car kit), press and hold the Navi wheel
for about 2 seconds when no call is in
progress, and proceed as described in
the user guide of your phone.
To answer or end a call, press the Navi
wheel. To reject a call, press and hold
the Navi wheel for about 2 seconds.
To switch an active call between the
car kit and your compatible phone,
press and hold the Navi wheel for
about 2 seconds.
Adjust volume
To adjust the volume when you use
the mobile phone or music device
connected to the car kit, turn the Navi
whee l to l eft o r rig ht.
CK-100_QUG_with_FCC&IC_en1.fm Page 6 Wednesday, April 30, 2008 12:26 PM
ENGLISH
FCC/Industry
Canada notice
NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be
co-located or operating in conjunction with
any other antenna or transmitter. NOTE:
Changes or modifications not expressly
approved by Nokia could void the user's
authority to operate the equipment.
Loading...