Page 1
Microlab Mobile Music Cube
Portable speakers
Front
Back
Page | 1 Microlab Mobile Music Cube Guide
Page 2
Accessories
Input cables
Power cable
USB power cable
Page | 2 Microlab Mobile Music Cube Guide
Page 3
Output socket
Power (in) socket
On/off switch
This is a quick guide on how to connect these speakers to a laptop.
On the back of one speaker you have:
On the back of the other you have:
Volume control buttons
Input socket
Main input socket (connects speaker direct to laptop)
The input cables have one gold coloured end and one silver.
Page | 3 Microlab Mobile Music Cube Guide
Page 4
1. Use the gold ended cable to connect the two speakers together. Plug one end into
back of speaker with single output socket and the other end into L output (middle
socket) on the other speaker
2. Use the silver coloured end cable to connect the speakers to the laptop. Plug one end
into the main input (top) socket and the other end into the audio (head phones)
socket on the Laptop.
3. You have two options to power the speakers:
The mains power supply
The USB power cable
It does not matter which you use but you must choice one as the speakers need
power to work.
When you have connected your chosen power supply check the speakers have power, if
they have, you will see a small orange light on the front on the speaker.
It is best to test they work before a session so play some music, YouTube etc. on laptop.
If you have no sound check the following:
Your laptop is not on mute and the laptop volume is turned up
Check all cables are pushed in correctly
Check speaker on/off button is switched on
Use the volume buttons on the back of speaker (+ to increase - to decrease)
If all else fails speak to a member of the Community Engagement Team
Page | 4 Microlab Mobile Music Cube Guide
Loading...