www.mgeups.com
MGE UPS SYSTEMS
Pulsar Evolution
2200/3000/3000 XL
Installation and user
manual
W
O
N
U
O
Y
P
O
T
S
L
L
I
W
G
N
I
H
T
O
N
34007115EN/AA - Page 1
Page 2 - 34007115EN/AA
Introduction
Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.
The Pulsar Evolution range has been designed with the utmost care. We recommend that you take the time to read this
manual to take full advantage of the many features of your UPS.
MGE UPS SYSTEMS pays great attention to the environmental impact of its products. Measures that have made Pulsar
Evolution a reference in environmental protection include:
◗ the eco-design approach used in product development,
◗ recycling of Pulsar Evolution at the end of its service life.
To discover the entire range of MGE UPS SYSTEMS products and the options available for the Pulsar Evolution range,
we invite you to visit our web site at www.mgeups.com or contact your MGE UPS SYSTEMS representative.
34007115EN/AA - Page 3
Foreword
Using this document
Information may be found in two ways, using:
◗ the contents;
◗ the index.
Pictograms
Important instructions that must always be followed.
Information, advice, help.
Visual indication.
Action.
Audio indication.
Page 4 - 34007115EN/AA
In the illustrations on the following pages, the symbols below are used:
LED off.
LED on.
LED flashing.
Contents
1. Presentation
1.1 Overall view ................................................................................................................................. 7
Tower position ................................................................................................................................. 7
Rack position .................................................................................................................................. 7
1.2 Back ............................................................................................................................................. 8
1.3 Control panel ................................................................................................................................. 9
2. Installation
2.1 Unpacking and parts check ....................................................................................................... 10
2.2 Upright installation (tower position) ......................................................................................... 11
2.3 Flat installation (rack position) .................................................................................................. 12
2.4 Connecting the protected equipment ....................................................................................... 13
2.5 Connection to the RS232 or USB communications port (optional)......................................... 14
2.6 Connection to the data-line protection port (optional) ............................................................. 14
2.7 Installation of the communications-card option ...................................................................... 15
3. Operation
3.1 Start-up ........................................................................................................................................ 16
3.2 Shift to booster or fader mode (during voltage variations in the AC-input power)..................... 16
3.3 Operation on battery power (following failure of AC-input power) ............................................. 17
Transfer to battery power .............................................................................................................. 17
Threshold for the low-battery warning...........................................................................................17
3.4 Personalisation (optional) ........................................................................................................... 18
Function ........................................................................................................................................ 18
ON / OFF conditions tab ............................................................................................................... 18
Battery tab..................................................................................................................................... 18
Voltage-thresholds tab .................................................................................................................. 19
Sensitivity tab ................................................................................................................................ 19
4. Maintenance
4.1 Trouble-shooting......................................................................................................................... 20
4.2 Replacement of the battery module .......................................................................................... 21
5. Environment ..................................................................................................................................... 23
34007115EN/AA - Page 5
Contents
6. Appendices
6.1 Technical data ............................................................................................................................. 24
Simplified diagram ........................................................................................................................ 24
Technical characteristics ............................................................................................................... 25
Examples of battery backup times ................................................................................................26
6.2 Glossary....................................................................................................................................... 27
6.3 Index............................................................................................................................................. 28
Page 6 - 34007115EN/AA
1.1 Overall view
Tower position
1. Presentation
Dimensions in mm
(W x H x D)
Evolution 2200
Evolution 3000
Evolution 3000 XL
438 x 87.9 x 640
(19") (2U)
Weight in kg
Rack position
P U L S A R
Evolution
3 0 0 0
P U L S A R
Evolution
3 0 0 0
Evolution 2200
Evolution 3000
Evolution 3000 XL
34
37
21
D
H
W
34007115EN/AA - Page 7
1. Presentation
1.2 Back
Pulsar Evolution 2200
RS232
DATA LINE PROTECTION
IN OUT
TO BATTERY
CABINET
1 234 115 1098
Pulsar Evolution 3000 / 3000 XL
RS232
DATA LINE PROTECTION
IN OUT
TO BATTERY
CABINET
1 234 115 109
USB communications port.
1
2
RS232 communications port.
Us/Out/Ausg I max 10A
Ue/In/Eing 230V/10A Max
3
1 2
2
1
6
Connector for automatic detection of an
additional battery module.
4
Data-line protection.
5
Slot for communications-card option.
6
Connector for an additional battery
module.
Ue/In/Eing 230V/16A Max
7
Output circuit breakers.
8
Four outlets for direct connection of
protected equipment.
9
Two groups of two programmable
AB
1
2
AB
1 2
2
1
Us/Out/Ausg I max 13A
outlets (groups 1 and 2).
8
7
6
10
Input circuit-breaker.
Page 8 - 34007115EN/AA
EXB additional battery module
12 14
13
12
11
Socket for connection to AC-power
source.
12
Battery module connectors (to the UPS
or to other battery modules).
13
Connectors for automatic detection of
additional battery modules.
14
Circuit breaker for battery ON/OFF and
protection.
1.3 Control panel
15
Iluminated ON/OFF button for the outlets.
16
Operation on battery power.
1. Presentation
17
UPS fault.
Battery fault.
Overload.
18
Group 1 programmable outlets supplied with power.
1
2
%
%
19
Group 2 programmable outlets supplied with power.
20
21
Booster or fader mode.
22
Bargraph indicating percent load at output.
23
Bargraph indicating the battery charge level.
76 to 100%.
51 to 75%.
26 to 50%.
0 to 25%.
34007115EN/AA - Page 9
Loading...