Metz MF 72TL68, MF 82TL95 User Manual

Bristol-72 MF 72TL68
Bristol-82 MF 82T

Operating instructions

04/39/23

L95

604 47 2017.A1

Foreword

Contents

Dear customer,
thank you for selecting a Metz

TV set with perfect 100 Hz tech­nology.

We have equipped this TV set
with a menu system which uses
"file cards" and believe that this
will provide you with a user
interface that is easy to under­stand.

If you have any problems, you
can press the "INFO" key to
display a help function that will
assist you in setting up your TV
set.

However, you should read at
least sections 1 to 8 of the
Operating Instructions before
putting your new TV set into ser­vice.

Your METZ-WERKE

1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Remote control unit . . . . . . . . . . . . . . . . . . . . . 6

4. Daily operating . . . . . . . . . . . . . . . . . . . . . . . 8

5. Setting the operating mode . . . . . . . . . . . . . . . 8

6. Selecting stations . . . . . . . . . . . . . . . . . . . . . . 9

7. Help function (Information) . . . . . . . . . . . . . . 10

8. Using the menü . . . . . . . . . . . . . . . . . . . . . . 11

Basic functionsExtended functionsConfiguration

9. Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10. AV playback . . . . . . . . . . . . . . . . . . . . . . . 15

10.1 Copying between AV devices. . . . . . . . . . . 17

11. Picture settings, general. . . . . . . . . . . . . . . . 18

11.1

Picture settings for a specific programme posi

12 Sound settings, general . . . . . . . . . . . . . . . . 21

12.1

Sound settings for a specific programme position

13. Colour standard . . . . . . . . . . . . . . . . . . . . . 23

14. Automatic zoom. . . . . . . . . . . . . . . . . . . . . 24

15. Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . 25

16. Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 27

17. Timer control . . . . . . . . . . . . . . . . . . . . . . . 28

18. Special function, picture format . . . . . . . . . . 30

18. Special function, Zoom . . . . . . . . . . . . . . . . 31

Special function, picture position . . . . . . . . . 31

19. EPG - NexTView. . . . . . . . . . . . . . . . . . . . . 32

19.1

Activating the EPG NexTView

19.2 Collecting NexTView data. . . . . . . . . . . . . 34

19.3 Using

20.

21. Programming stations . . . . . . . . . . . . . . . . . 39

22. Stationlogo . . . . . . . . . . . . . . . . . . . . . . . . 42

23. Sorting stations. . . . . . . . . . . . . . . . . . . . . . 43

24. AV devices . . . . . . . . . . . . . . . . . . . . . . . . . 44

25. Inital programme position . . . . . . . . . . . . . . 47

26. Setting the operating scope . . . . . . . . . . . . . 48

27. Operation without the remote control unit. . . 50

28. Technical data . . . . . . . . . . . . . . . . . . . . . . 51

29. Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

30. Connecting headphones . . . . . . . . . . . . . . . 53

31. Cleaning the TV set. . . . . . . . . . . . . . . . . . . 53

32. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 54

NexTView

Setting the language and country

. . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . 33

. . . . . . . . . . . . . 38

tion20

Troubleshooting. . . . . . . . . . . . . . . . . . . . . 57

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

22

2

1. Installation

• Take care that no bright artificial light or sunshi­ne falls directly on the screen. This could cause
reflections which have a negative effect on the
brilliance of the picture.

• The optimum viewing distance is about
five times the screen diagonal dimen­sion. For TV sets with a 70 cm screen, it
is thus about 3.5 metres.

• The antenna cable and any other components
(such as a video recorder) connected between
the antenna socket in the wall and the TV set
must comply with the European standard
EN 60966-2-4.

• There may be no magnetic fields in the immedi­ate vicinity of the TV set. Keep loudspeaker
boxes well away from the set.

• The antenna cable used for connecting the TV
set must have a screening attenuation of at least
75 dB.

• The use of non-approved cables will invalidate
the operating permission for the TV set.

5 x cm

cm

y

• For details of how to connect peripheral devices
such as video recorders, DVD players, etc. press
the „INFO“ key to call the help function, select
„Connecting AV devices“ with the cursor and
press „OK“ to display the information.

3

2. Safety notes

• Always place the monitor on a solid, stable sur­face.

• If a cold TV set is moved to a warm room,
always allow any condensation on the screen to
evaporate before switching it on.

• The TV set is intended for use in a dry room. If,
in exceptional circumstances, you use it out­doors, take care that is protected against moi­sture (rain, splashed water, dew).

• TV sets need adequate ventilation. Never cover
the openings on the rear of the set with curtains,
doilies, newspapers, etc. Also take care that the
slits in the bottom of the case are freely accessi­ble so that the intake of the cooling air is not
hindered.

• If you place the TV set in a wall unit, leave suffi-

y

cient space on all sides for the circulation of
cooling air.

• Do not place the TV set close to a radiator, since
this would effect adequate cooling.

• Do not place

burning candles or

vessels containing liquids (vases, etc.)
on top of the TV set, since any hot wax or water
dripping into the set could cause serious damage
to the electronic components and could also jeo­pardize the electrical safety of the set.

4

2. Safety notes

• Lightning can damage electrical equipment. A
lightning flash entering the power cable or the
aerial cable can damage the TV set even if it is
switched off. You should therefore disconnect
the power cable and aerial cable from their out­lets or from the TV set in the case of a thunder­storm.

• The monitor may be opened and repaired only
by a qualified person.

CAUTION! HIGH VOLTAGES CAN KILL!
If repairs should be necessary, consult your
local dealer.

• Always switch off the TV set before cleaning it.

• Do not hold the remote control directly in front
of your eyes and press a button. The remote
control emits infrared radiation!

• Do not place rechargeable batteries in the bat­tery compartment of the remote control.
Use only two 1.5 V dry batteries of the type
LR03/AM4/AAA (Micro).

• The TV set is intended only for the reception and
reproduction of picture and sound signals.

• The TV set may be operated only from a mains
voltage of 230 VAC, 50/60 Hz.
Australia: 240 VAC.

• Lay the power cable so that nothing stands on it
and no-one can trip over it.

5

















3. Remote control unit

The remote control unit transmits com­mands to the TV set with the aid of infra­red light. You should always point the



remote control unit directly at the TV set.
The remote control unit may possibly
interfere with other infrared devices (such



as infrared headphones) within its range.
Sunlight falling directly on the TV set may



interfere with the operation of the remote
control unit, because the TV set cannot
detect the infrared signals from it. The TV
set must first be switched on with the



main switch before the remote control unit
can be used.

The most important keys in normal
use



 ON:

with programme position 1 or the pro-










grammed initial programme position
selected.
OFF (standby)

 Numeric keys (direct station selection)
 P+ / P-: next/previous programme

position

 Volume control

Also used to change settings in the
menu

 Return to previously selected program-

me position

 Display the station table

Never load rechargeable batteries
into the battery compartment of the
remote control unit!

Only use two 1.5V LR03/AM4 batte­ries, size AAA.

6

3. Remote control unit

Overview of key functions

 Switch to satellite radio mode

Switch on from standby mode to satellite radio mode

1)

(

only if a SAT upgrade module is fitted)

 Function keys F1 ... F3

Press F1 or F3 briefly to return all settings to the factory defaults
Press F1 or F3 longer to display the available special functions
Press F2 to change the sound settings

 Cursor control key in the „Information“ and the TV menu
 OK - confirmation key
 Change settings in the TV menu
 Sound mute
 Call the TV menu

In the menu: return to the previous main menu item

 Call Teletext
 Call the „Information“

In the „Information“: return to the contents

 Frame freeze

In the „AV devices“ menu: delete

1)

 Return to previously selected programme position

In the TV menu: call „Configuration“

 Display date and time

In the TV menu: call „Timer“

 In the TV menu: call the „Station table“ or display station attributes
 Call the sound settings

In the TV menu: call „AV devices“

 Call the picture settings

In the TV menu: call „Picture and sound“

 Return to the TV picture

Switch from satellite radio mode
standby mode to TV mode (

1)

to TV mode Switch on from

1)

only if a SAT upgrade module is fitted)

 AV playback/record menu

Switch on from standby mode to AV mode

7

4. Daily operation

Switching on

Switch on the TV set with the main
switch. The red standby indicator lights.
Then enter the desired programme posi­tion on the numeric keys of the remote
control unit.
If you have defined an initial program­me position (see page 46), pressing the

key with the TV set in standby mode

will select this programme position.

Switching off

Press the key to switch the TV set to
standby mode or press the main switch
on the TV set to switch it off completely.

Adjusting the volume

You can adjust the volume with the
key.

+

-

Adjusting picture and sound set­tings

Call the picture settings with the blue key

or the sound settings with the yellow
key .
At the bottom left of the screen, you will
then see the setting box with the various
functions. Select the desired function
with the rocker key „P+/P-“ and adjust
the setting with the

+

key.

-

TV AV R

8

5. Setting the operating mode

The TV set can be switched on at the desired ope­rating level with the keys "TV", "AV" and "R".
These keys can also be used to switch between the
operating levels.

When the TV set is switched on with one of these
keys, the station which was last selected at this
operating level is again set.

TV = television mode
AV = audio-visual mode for use with AV devices
R = radio mode

(1)available only if a SAT receiver is installed)

1)

6. Selecting stations

Station selection and programme posi­tion management

Your TV set can manage up to 999 programme
positions in the station table. You can select these
programme positions with the numeric keys, with
the oval „P+/P-“ rocker key or via the station
table.

When you enter a position number on the nume­ric keys, the first digit you enter is the „hundreds“
digit. If there are less than 100 programme posi­tions defined, this digit automatically moves to the
„tens“ position. If less than 10 programme posi­tions exist, it automatically moves to the „ones“
position.

After pressing any numeric key, you have three
seconds to enter further digits.

Selecting programmes from the station
table

In normal TV mode, you can open the
station table with the white key . In

the table which is then displayed, you
can select a station with the oval „P+/P-“
rocker key. Then press the „OK“ key to
switch to this station.
If more than 20 stations are stored in the
station table, you can display the next
10 stations by pressing the oval cursor
control key.

Call the menu

14 MDR
13 Nord 3
12 RTL
11 SAT 1
10 Nord 3
9 SuperRTL
8 Kabel 1
7 PRO 7
6 West 3
5 Hessen 3
4 SW-BW
3 Bayern 3
2 ZDF
1 ARD

Return to previous station

With the red key , you can switch back and
forth between the last two stations you selected.

OK

9

Call the info

7. Help function (Information)

When designing this TV set, we have tried to
make its operation as easy as possible so that
you will enjoy learning how to use it.
The TV set itself can provide the answers, with the
menu „Information“, to any questions you may
have during installation and switching on.
To use this function, simply press the „INFO“ key

INFO

to display the table of contents of the
„Information“ on the screen.

The menu „Information“ (help function)

In the table of contents, or in the index, you can
then select the information you need with the cur-

Information

Contents (1/2)

Index

Programme selection
Pictures settings
Sound settings
AV playback / recording / satellite recording
Teletext
Function keys
Satellite radio mode

Use the cursor to select an underlined text.
OK: further information INFO: help index
Previously visited pages:  backwards  forwards

OK

>

--

tory text with the cursor and press „OK“ in order
to display further information about them.

You can scroll back and forth through previously
selected help pages with the aid of the red and
green keys.

sor control key.
„Cursor right“ : move to next page of the
index.
„Cursor left“ : scroll backwards through
the index.
„Cursor up“ : select the previous underli­ned text or the arrow -->.
„Cursor down“ : select a line in the list.
Then press the „OK“ key to display this
information.

You can select any underlined words in the
table of contents, the index or the explana-

10

8. Using the menus Call the menu

With the „TV menu“, we help you to find your
way through the many operating functions of
your TV set.
Do not hesitate to try out the options in the
various menus. Any changes you make become
permanently effective only if you save
them by pressing the „OK“ key. If you
are not sure that you want to retain a
new setting, you can simply exit from
the menu by pressing the „TV“ key. The
new setting is then discarded.
While you are in the TV menu, you can
return to the main menu item

at any
time by pressing the „MENU“ key. If you
do not understand a menu item, press
the „INFO“ key for more information.
To return to the menu, press the „INFO“
key twice.
The five main sections of the menu can be opened
with the coloured keys. The help information is
shown in the form of two card files containing the
subjects

(blue) and the sections of the selected
subject (yellow). You can select the sub­jects and sections with the aid of the red
triangular cursor, which is moved with
the oval key.
Pressing the „OK“ key then moves you to
the setting window

below the file boxes.

The current setting is displayed here and

+

you can change it with the

key.

-

To save the new setting, press the „OK“
key. This also returns you to the file of
yellow section cards. If you do not want
to save the new setting, press the „MENU“ key to
return to the related main menu item or press the
„TV“ key to exit from the menu.

You can delete your input by pressing the ll key.

  

Picture-Volume

AV devices
Station table
Timer
Configuration

Coloured keys:
call menü
TV: return to TV
picture

TV-Menü

  

Picture-Volume

AV devices
Station table
Timer
Configuration

: select

menu item

TV-Menü

MENU

Main menu items

OK

Subjects*

Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.

These settings apply to all programme positions.

Sections*

Picture pos., vertica
Panorama
CTI
Comb filter
Noise reduction
Picture sharpness
Colour intensity
Contrast
Luminance

Cursor Setting window

* The number of subjects and sections

displayed here depends on the opera­ting scope setting in the menu.

11

9. TeletextCall the menu

Teletext is a free information service provided
by many TV stations. Within this „electronic

i

TEXT

TV Guide 2
FS-Sendungen

Themen

Subjects

Chapter
Pages
Next BookMark
Set

BookMark

Cursor: select
Subjects / Section.
OK: display page

TV-Menü

ARD morgen
ARD heute
TV Guide
Sport 1
Wetter
tagesschau
Übersicht

Impressum
Inhalt

OK

Blue preselection key

Yellow preselection key

White preselection key



TopicsSections

100 100 SAT.1 21.05.02 15:30:23





Pages

Pages



OK

OK



00 01 02 03 04 05 06 07 08 09

Sub-pages

newspaper“, you can scroll through the pages
in various ways.

Calling T

eletext:

• Press the „TEXT“ key.
If the station you are watching trans­mits „TOP“ teletext, two file-card boxes
are displayed (see the picture on the
left). Otherwise, page 100 appears
(see the lower picture).

• In the case of „TOP“ stations, you

can select a file card with the cursor
control key.

• After selecting a card, press „OK“ to

open it.

Controlling Teletext when the pages are displayed directly:

The blue key is used to preselect the subject
selection function.

The yellow key is used to preselect the section
selection function.

The white key is used to preselect
the page selection function.

next mark

After pressing one of these preselection
keys, you can step through the sub­jects, sections or pages with the rocker
switch „P+/P-“.
You can also move directly to a page
by entering its number with the nume­ric keys. If multiple sub-pages exist for
the selected page, their numbers are
displayed in black. In the example on
the left, there are five sub-pages.
You can scroll through the sub-pages
with the cursor control key.

12

9. Teletext

Double font size

When viewing Teletext pages, you can
switch to a larger font with the F1 key.
The first time you press this key, the
upper third of the page is displayed with
the large font. Pressing it again displays
the centre third of the page and pres­sing it a third time displays the bottom
third of the page. Pressing the key a
fourth time returns to the full-page
display with the normal font size.

Riddle solution key

Function key F2 is programmed to
display hidden text on a Teletext page,
such as the solutions to riddles.

n to last contents page

Retur

You can return directly to the last con­tents page at any time by pressing the
 key.

eletext: setting marks

T

3)

You will probably have your favourite
Teletext pages, such as stock exchange
reports, news, weather forecasts, which
you visit frequently.
To permit rapid access to such pages,
you can set so-called „marks“ on these
pages.
To do this, first go to the page on which
you want to set the mark.

• Then press the red key for „Set
mark“ to set a mark on this page. A
„paper-clip“ symbol appears at the top
left corner of the page. If the page has
sub-pages, the mark is always set and
displayed on the currently displayed
sub-page.

Up to 10 marks can be set on each

☞

programme position. The total
number of marks (on all program­me positions) is restricted to 128.

T

eletext: scrolling by marks

3)

With Teletext active, you can scroll
sequentially through all marked pages by

repeatedly pressing the green key
You can even view your favourite pages
directly from the TV mode with the
„TEXT“ key. Pressing the „TEXT“ key
opens Teletext and selects the first marked
page. You can then scroll through the
marked pages with the „TEXT“ key.
Pressing the „TEXT“ key with the last mar­ked page displayed switches back to the
TV programme.

eletext: displaying active marks

T

3)

If marks are set for a programme position,
pressing the F3 key displays a list of all
marks, showing where they are set.
Pressing F3 again hides the list.
With the list displayed, you can select
any desired mark with the numeric keys.

eletext: deleting marks

T

3)

Call the teletext page whose mark you
want to delete and press the red key

„Clear mark“ to delete the mark.

3) Not possible with an external
satellite receiver!

13

9. Teletext

Teletext: subtitles

Your TV set can display subtitles transmitted on
Teletext together with the programme. If such sub­titles are available, the station normally displays a
message at the beginning of the programme, tel­ling you where to find the subtitles.

• Press the „TEXT“ key to open Teletext.

• In the case of „TOP“ stations, press the „OK“
key to open any page.

• Use the numeric keys to enter the number of the
page containing the subtitles.

14

10. AV playback

AV playback

(Devices with switching voltage)
AV playback is the term for playing back video­cassettes, DVDs, etc. from an AV device for vie­wing them on a TV set.
In order to view the pictures, you must program­me your TV set so that it automatically switches to
the AV programme position when a signal is
received at the EURO socket to which the AV
device is connected.

Programming automatic switching

In a menu with two asterisks (**),

☞

the settings for this menu item can­not be changed.

Programme switching is set to

☞

"On" in the factory for both EURO
sockets.

• Press the „MENU“ key to open the TV
menu.

• Press the red key to open the menu
„Configuration“.

• Use the cursor control key to select „EURO
socket“.

• Use the cursor control key to select „EURO 1 or
„Euro 2“.

• Press the „OK“ key and then, in the setting win­dow, set „Programme switching“ to „ON“ with

+

the

key.

-

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the TV menu.

  

Picture-Volume
AV devices
Station table
Timer
Configuration

Configuration

: select,
OK: go to
settings.

TV-Menü

Call the menu

MENU

OK

Operation
EURO sockets*
Station search
Country*
Language*

EURO 2
EURO 1

Change stations on

OK

When you subsequently start a playback opera­tion on the connected AV device, the TV set swit­ches to playback mode, regardless of the current­ly selected programme position.

* The number of subjects and sections

displayed here depends on the opera­ting scope setting in the menu.

15

AV







In a menu with two aste-

☞

risks (**), the settings for
the menu item "VCR" can­not be changed.

AV menu Playback

DVD/Videorec. 1

EURO1

DVD/CD Player

EURO2

Camcorder/Foto

Front of TV set

10. AV playbackCall the menu

AV playback

(Devices without switching voltage)
In order to view the pictures, you must manually
switch your TV set to playback mode.

• Select any programme position.

• Press the „AV“ key.
Press the numeric key for the desired AV device.

•

• The TV set now switches from the cur­rent programme to playback mode.

• Start the playback operation on the
AV device. Playback mode remains
active until you switch to another pro­gramme position.

Picture quality when playing
back from tape machines

The VCR function provides the best possi-

ble picture quality when playing back
recordings from a tape machine, such as a camcor­der or video recorder.

Setting the VCR function

• Select the appropriate programme position.

• Press the „MENU“ key to open the TV menu.

• Press the „OK“ key to open the menu „Picture

and sound“.

• Use the cursor control key to select „Picture set-

tings for Pr xy“.

• Press the „OK“ key and then use the cursor

control key to select „VCR“.

• Press the „OK“ key for confirmation and use the

-/+ key to select „Opt. 1“. If this setting does
not produce a satisfactory picture quality,
switch to „Opt. 2“.

• Press the „OK“ key to save the new setting.

16

10.1 Copying between
AV devices

• Select any programme position.

• Press the „AV“ key to display the „AV menu
Playback“.

• Select the AV playback device with the numeric
keys.

•

The TV set switches from the current programme
to the selected playback device.

• Press the „AV“ key again.

• Then press the red key to select the recor­ding device.

• Press the green key to lock the selected signal
connection. If a Data Logic video recorder is
connected, it will immediately start to record,
providing there is a cassette with a protection
tag inserted.

• Start recording with the recording AV device.

• Play back with the playback AV device.

17

Call the menu

MENU

OK

  

Picture-Volume

AV devices
Station table
Timer
Configuration

: select,
OK: go to
settings.

TV-Menü

Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.

Contrast 61
Standard value 50
Accept 61 as the standard value:

OK

11. Picture settings, general

In a menu with two asterisks (**), the set-

☞

tings for certain menu items cannot be
changed.

You can adjust the picture settings (brightness,
contrast, chrominance, etc.) for all programme
positions and save these settings as the standard
values. These standard values can be recalled at
any time by pressing the „OK“ key.

Defining the picture settings:

• Press the „MENU“ key to open the TV menu.

• Press the „OK“ key to open the menu

Picture pos., vertica
Panorama
CTI*
Comb filter*
Noise reduction*
Picture sharpness*
Colour intensity
Contrast
Brightness

2)

*

• Press the „TV“ key to close the menu

☞

Rotation

„Picture and sound“.

• Use the cursor control key to select the
individual picture settings.

• Press the „OK“ key and then use the

+

key to change the setting in the

-

setting window.

• Use the cursor control key to select the
3rd line in the setting window "...
accept as a standard value: OK".

• Save the new setting as the standard
value by pressing the „OK“ key.

If these standard settings are unsatisfactory
for some programme positions, you can
define special individual settings for these
positions as described on the next page.

2)

OK

* The number of subjects and sections

displayed here depends on the opera­ting scope setting in the menu.

18

This function can be used to compensate for the
effects of the Earth’s magnetic field. Normally, this
adjustment should be necessary only when you
first install the TV set, or if you move it to a diffe­rent location, and the picture is not aligned hori­zontally on the screen.

2) Available only on TV sets which are equipped
with this option.

11. Picture settings, general

In a menu with two asterisks (**), the set-

☞

tings for certain menu items cannot be
changed.

Panorama

☞

2)

function

This setting can be made only on 16:9 TV
sets.

Call the menu

MENU

The panorama function can be used to expand
"normal" programmes in 4:3 format to the 16:9
format. This is done by increasing the width of the
picture to fill the complete width of the screen.

2)

Setting Panorama

• Press the "MENU" key to open the TV
menu.

• Press the "OK" key to open the menu
"Picture and sound".

• Use the cursor control key to select
"Panorama".

• Press the "OK" key and then, in the
setting window, use the
change the setting for "Panorama".

mode:

-

+

key to

  

Picture-Volume

AV devices
Station table
Timer
Configuration

: select,
OK: go to
settings.

TV-Menü

• Use the cursor control key to select the
menu item "Mode" and use the

+

key to select

-

either "linear" or "non-linear".

• Press the "OK" key to save your changes.
The picture shows the factory setting.

• Press the "TV" key to close the TV menu.

2)

The functions "Panorama

☞

" and "Zoom"

can also be used together.

OK

Picture pos., vertica
Panorama
CTI*
Comb filter*

Noise reduction*

Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.

Panorama On, zoom 1 Mode Non-linear

Picture sharpness*

Colour intensity

Contrast

Brightness

2)

*

OK

2) Available only on TV sets which are equipped
with this option.

OK

* The number of subjects and sections

displayed here depends on the opera­ting scope setting in the menu.

19

Call the menu

MENU

OK

11.1

☞

Picture settings for a specific
programme posi

In a menu with two asterisks (**), the pictu-

tion ...

re settings for a specific programme posi­tion cannot be changed.

If the standard settings are not satisfactory for cer­tain programme positions, you can define diffe­rent settings for these positions with the menu item
„Picture settings for Pr ...“. These settings apply
only to the selected programme position and can­not be overwritten by the standard settings.

  

Picture-Volume

AV devices
Station table
Timer
Configuration

: select,
OK: go to
settings.

TV-Menü

VCR
Colour standard
Colour offset
CTI

Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.

These settings apply to the currently selected
programme position.

OK

Comb filter
Noice reduction
Picture sharpness
Colour intensity
Contrast

• Press the „OK“ key and then select the setting
you want to change.

• Press the „OK“ key to confirm your selection
and then, in the setting window, use the
to change the setting.

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

☞

OK

Defining different picture settings
for Pr. xy:

• Select the programme position for
which you want to define different pic­ture settings.

• Press the „MENU“ key to open the TV
menu.

• Press the „OK“ key to open the menu
„Picture and sound“.

• Use the cursor control key to select the
item „Picture settings for Pr. xy“.

+

key

-

You can also define and recall the individu­al picture settings in the station table.

* The number of subjects and sections

displayed here depends on the opera­ting scope setting in the menu.

20

2) Available only on TV sets which are equipped
with this option.