Merrychef e6 User Manual

)

)

eikon™ Series e2 and e6

QUICK START GUIDE

The illustrations herein are for guidance purpose only
and are not intended to be an exact representation of
those supplied on the oven.

QUICK SERVICE OVEN

START UP

1. Switch the oven on.

2. Lightly tap the easyToUCH screen once
to freeze the Serial # display, tap again
to continue.

3. Select a preheat temperature, if
displayed.

4. Display shows progress as the oven
preheats. (Tap the red ‘X’ symbol to
stop.)

5. The oven is ready to use when the
‘COOKBOOK’ is displayed.

USING A COOKING PROGRAM

WARNING:

1. Select a program group, for example,
‘BURGERS’ to display the individual
looking programs.

2. Select a cook program to start, for
example, 2 BURGERS.

3. Follow instructions if displayed on the
screen.

4. Touch the green tick to cook.
The cooking time counts down for
each program stage.

5. When the program ends a red bar is
displayed usually with an audible
sound - open the door or touch the
red ‘X’ to return to the cook program.

Note: Opening the oven door during cooking
stops the cooking program and displays a
warning. Closing the door allows the user to
continue or cancel the cooking program.

Taking all the necessary precautions to ensure you do not burn yours elf, open the oven
door to place the food into the hot oven and close the door.

COOKBOOK DISPLAY

DISPLAYS ALL COOKING PROGRAMS (Optional)
SHOWS PROGRAM GROUPS

FAVORITES (Optional

PROGRAM GROUP
Each group contains a collection of cooking

programs.

CHANGE OVEN TEMPERATURE (Optional

STOP/CANCEL

PROGRAM STAGE

P/N 20000405 – REV A

1

OPERATING GUIDE: FULL SERVICE OVEN
easyToUCH MAIN MENU SCREEN

Refer to the oven Installation & Operating
Instructions for information of the oven functions
available.

USING THE PRESS & GO MENU

1. Select ‘PRESS & GO’ from the main menu
screen.

2. Select the item required to cook.

3. The display shows the temperature, cooking
time, microwave power and fan speed while
the timer counts down. The timer bar turns
red to indicate the cooking cycle has
finished.

USING A COOKBOOK PROGRAM

WARNING:

ENSURE THERE IS FOOD PRODUCT IN THE OVEN BEFORE STARTING A COOKING PROGRAM.

WARNING:

To find the required Program in the cookbook:

1. Select ‘COOKBOOK’ from the main menu
screen.

2. Select the ALL MENUS symbol.

3. Use scroll up/down arrows to find the
program.

4. Select the required cooking program to start
cooking. For example, ‘1 BURGER’.

5. The program either starts immediately
displaying a countdown timer, or an
instruction is displayed first; follow the stage
instruction then select OK to start cooking. If
the oven door is not opened within 30
seconds a warning message appears.

6. The cooking timer counts down to zero and
makes a sound to indicate an operator
action is required at the end of a cooking
stage or the end of a cooking program.

HOT SURFACE HAZARD

DEVELOPMENT

1

MODE

MENU SHORTCUT

2

3

CLEANING/TEMP

4

CHANGE
SETTINGS

5

P/N 20000405 – REV A

2