Medion P13161, MD 21097 Instruction Manual

LED

Backlight TV

47 cm

18.5“

Instruction Manual

47 cm (18.5") LED LCD TV
with inbuilt DVD Player and HD DVB-T Tuner

MEDION® LIFE® P13161 (MD 21097)

A

i

47 cm (18.5”) LED LCD TV with inbuilt

DVD Player and HD DVB-T Tuner (P13161) MD 21097

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts for a period
of 24 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion. The
benefits conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.

After Sales Support

Telephone: [phone]

Internet: www.medion.com.au

A

ii

47 cm (18.5”) LED LCD TV with inbuilt

DVD Player and HD DVB-T Tuner (P13161) MD 21097

Repair and Refurbished

Goods or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be
returned to the Supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as
files stored on a computer hard drive, telephone numbers stored on a mobile telephone,
songs stored on a portable media player, games saved on a games console or files stored
on a USB memory stick) during the process of repair, some or all of your stored data may
be lost. We recommend you save this data elsewhere prior to sending the product for
repair.

You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where
they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 884 987 or write to us at:

MEDION Australia Pty Ltd
St. Leonards, NSW 2065
Australia

MEDION Help Desk 1300 884 987
(Operating Hours : Mon-Fri 08 :30AM to 06 :00PM EST)

Email: [e-mail]

After Sales Support

Telephone: [phone]

Internet: www.medion.com.au

A

Device Overview

LED LCD TV

Front and Right-Hand Side View

1. LED LCD Display

2. LED LCD TV Mode indicator: orange when the device is in standby mode;

blue when the device is switched on.

3. Infrared sensor: reception field for the infrared TV signals.

4.

EJECT

5. Disk: Start or pause replay

6.

VOL +/VOL -

7.

CH + /CH -

8.

MENU

9.

SOURCE

10. Standby switch, switch on the device or switch to standby

mode

11.

POWER

Eject the disk

Adjust the volume or navigate in the menu

Channel up/down or navigate in the menu

Call up on-screen menu to change settings on your device

Change input source

Mains switch

1

A

Rear View / Connectivity

1. DVD-Player

2. ANT. Connection using an antenna (analogue or DVB-T)

3. AUDIO L R Audio inputs (red/white) for AV and Component IN

4. AV1 Video input 1 (yellow)

5. Component IN 3.5 mm jack component input for the connection

of devices with a component output

6. Connectivity for headphones with 3.5mm jack

7. VGA VGA connection: to connect a PC or Notebook

8. VGA AUDIO Audio input for PC or Notebook

9. SCART/AV2 SCART input

Video input 2 (via SCART to AV adapter)

10. HDMI 1-2 HDMI connection: to connect a device with HDMI out

11. USB USB interface for MP3 and JPG

2

A

Remote Control

3

A

1

2 Numeric

3

4

5

6

7

8 Direction buttons 

9

10

11

12

buttons

FAV

FAV-

FAV+

EPG

INPUT

INFO

OK

MENU

P.MODE

S.MODE

STANDBY, i.e. switch off the LED LCD TV temporarily

TV: Channel selection

Mute

Open favourites list

Previous favourites station

Next favourites station

DVB-T: Digital TV guide for television and radio programs
(depends on transmitter)

Select input signal of connected devices

Display information, such as current channel number and
picture format

Confirm selection in specific menus. Also used as ENTER

Open and close menu

Choose picture mode

Choose sound mode

INDEX

13

SIZE

14

SUBTITLE

15

16

17

18

19

20

21

22

D.MENU

TITLE

PROGRAM

Red button

PVR

INTRO

Green button

PC AUTO

CH+/-

Go to the root directory of USB media player

DVD: Play button - Start playback / Pause button: Pause
playback

DVD: Subtitle function for DVD player

DVD: STOP button, end playback / recording

DVD: Open and close DVD menu

DVD: Display main DVD menu

DVD: Program playback list of DVD player

Call up the starting function, if a USB medium is connected.

DVD: Introduction function

DVD: Eject button

Automatic adjustment in VGA mode

Channel up/down navigating

23

24

25

4

SLEEP

Increase (+) or reduce (-) volume.

Set previous TV program

Sleep timer

A

26

27

TV/RADIO

ASPECT

DVB-T: Switch between TV and radio stations

Change picture format

28

29

30

31

32

33

34

35

36

37

EXIT

DVD SETUP

HOLD

ZOOM

TEXT

ANGLE

SUBPAGE

REVEAL

D.DISP

GOTO

A-B

Exit menu

DVD: Open menu

DVD: Zoom function for DVD player

DVD: Select camera position (angle) in DVD playback

DVD: Fast forward

DVD: Fast rewind

DVD: Next title/next section

DVD: Previous title/previous section

DVD: Displays information on DVD currently inserted, e.g.
section, playback time elapsed, etc.

DVD: Select a section on a DVD

DVD: Setting the AB repeat

Blue button

REPEAT

38

Yellow button

DVD: Setting the playback mode

5

A

Contents

Device Overview ........................................................................................................ 1

LED LCD TV .......................................................................................................... 1

Front and Right-Hand Side View ...................................................................... 1

Rear View / Connectivity ................................................................................. 2

Remote Control .................................................................................................... 3

Contents ..................................................................................................................... 6

Information About These Instructions ...................................................................... 9

Target Group ........................................................................................................ 9

HD ready .............................................................................................................. 9

Contents ............................................................................................................. 10

Safety Instructions ................................................................................................... 11

Operating Safety ................................................................................................. 11

Set-Up Location .................................................................................................. 12

Repairs ................................................................................................................ 12

Intended Environment ........................................................................................ 13

Power Supply ..................................................................................................... 14

Battery Handling ................................................................................................. 15

Information about Conformity ............................................................................ 16

Start of Operation ............................................................................................... 17

Unpacking .......................................................................................................... 17

Installation .......................................................................................................... 17

Inserting the batteries in the remote control ....................................................... 18

Connect TV aerial................................................................................................ 18

DVB-T mode .................................................................................................. 18

Connecting a DVB-T aerial ............................................................................. 18

Connecting power supply .................................................................................. 18

Switching the LCD TV on and off ........................................................................ 18

After switching on the unit for the first time ........................................................ 19

Channel selection ............................................................................................... 20

Setting the volume ............................................................................................. 20

Picture Setting .................................................................................................... 21

Displaying Information ....................................................................................... 22

Favourites List ..................................................................................................... 22

6

A

Input Source Selection ........................................................................................ 22

DVD Mode ................................................................................................................ 23

Switching between TV and DVD Mode ............................................................... 23

Inserting a DVD ................................................................................................... 23

Button function ................................................................................................... 24

Special display message ................................................................................. 24

Playback ........................................................................................................ 24

(Stop) ............................................................................................................ 24

(Skip) ............................................................................................................. 24

(Forward) ...................................................................................................... 24

GOTO (direct search) ..................................................................................... 24

D.DISP (time display) ..................................................................................... 25

REPEAT .......................................................................................................... 26

PROGRAM (playback sequence) .................................................................... 26

LANG (Audio Setting (Language)) .................................................................. 27

Open DVD menu ........................................................................................... 27

Navigating on MP3 and JPEG data media ............................................................ 27

SETUP menu in DVD mode .................................................................................. 28

Navigating in the menus ................................................................................ 28

Menu: General Setup ..................................................................................... 28

Menu: Audio Setup ........................................................................................ 29

Menu: Digital Setup ....................................................................................... 29

Menu: Preferences Page ................................................................................. 30

Operation through the Remote Control .............................................................. 32

Media Mode .............................................................................................................. 34

Media Mode and USB Connectivity ..................................................................... 34

Recording via record button (PVR or red button) ................................................. 35

Recording via EPG Scheduling ....................................................................... 35

Time Shift function ........................................................................................ 36

Switching between TV Mode and Media Mode ................................................... 37

Media Menu System ............................................................................................ 37

Basic OSD Menu Settings ......................................................................................... 38

Navigating within the Menu ................................................................................ 38

Menu System ...................................................................................................... 39

CHANNEL Menu ............................................................................................ 39

PICTURE Menu ............................................................................................... 41

SOUND Menu ................................................................................................ 42

TIME Menu .................................................................................................... 43

7

A

LOCK Menu .................................................................................................. 44

SETUP Menu ................................................................................................. 45

EPG - PROGRAM GUIDE ............................................................................................ 46

Connecting External Devices ................................................................................... 48

Connecting Headphones .................................................................................... 48

Connecting an External DVD Player .................................................................... 48

1. With a SCART Adapter ............................................................................... 48

2. Stereo RCA Cable and a Video RCA Cable .................................................. 48

3. Component Video Cable (3 x RCA) ............................................................ 49

4. HDMI Cable .............................................................................................. 49

Connecting a Camcorder .................................................................................... 49

With a Stereo RCA Cable and a Video RCA Cable ........................................... 49

Device with HDMI or DVI Output........................................................................ 50

Connecting an External Device with HDMI Output ....................................... 50

Connecting an External Device with DVI Output ........................................... 50

Connecting a PC or Notebook ............................................................................ 51

Troubleshooting ...................................................................................................... 52

Do You Need More Help? ................................................................................... 53

LCD TV pixel faults .............................................................................................. 54

Cleaning ................................................................................................................... 55

Disposal .................................................................................................................... 56

FCC Compliance Statement ...................................................................................... 56

Technical Specifications .......................................................................................... 57

Copyright © 2011

All rights reserved.
This manual is protected by Copyright.

The information in this document is subject to change without notice.

This product uses copyright protected technologies that are protected by patents in
the USA and other intellectual property rights. The use of these copyright protected
technologies must be authorized by Macrovision and they must only be used for the
intended permitted possible replays and other restricted replays, unless other
possibilities have been expressly approved by Macrovision. Decompiling and
decoding are forbidden.

8

A

Information About These Instructions

Please be sure to read these operating instructions carefully and follow
all instructions given. This will ensure that your LCD TV will work reliably
and last a long time. Always store these instructions in a handy place
near your LCD TV. Keep the operating instructions so that you can pass
them on with the LCD TV if you sell it.

Target Group

 This unit is to be used only for receiving and playing back TV programmes. The

range of connections supplied makes it possible to expand the input and output
sources (e.g. receiver, DVD player, DVD recorder, video recorder, PC, etc.).

 This unit is intended for use in dry, indoor areas only.

 It is not suitable for use as a data monitor for office workstations.

 The unit is intended for private use only and not for industrial or commercial use.

Using the device in extreme environmental conditions may result in it being
damaged.

HD ready

Your LCD TV is “HD ready”. That means that it is capable of showing high-resolution
TV programmes (HDTV).

9

A

Contents

Please check the items received in the box and inform us within 7 days from
purchase if anything is missing. Your statutory rights are not affected.

Caution!

Do not let children play with the plastic film. There is a risk of
suffocation!

You should receive the following items:

 LED LCD 18.5" with DVD Player

 1 x Remote Control incl. Batteries (2 x R03/AAA/1.5V)

 1 x Base Stand

 1 x Compoent Adapter 3.5 mm (YPbR/YUV)

 1 x SCART-to-AV Adapter

 1 x Instruction Manual

 1 x Warranty Certificate

 2 x Warranty Sticker

10

A

Safety Instructions

Operating Safety

 Children should be supervised to ensure they do not play with this unit. This unit

is not intended for use by people (including children) with reduced physical,
sensory or mental abilities or for those without experience and/or knowledge,
unless they are supervised by a person responsible for their safety or they have
been instructed on its use.

 Keep packaging material such as plastic film away from children. There is a risk of

suffocation if used improperly.

 Never open the casing of the LCD TV (electrical shock, short circuit and fire

hazard)!

 Never insert any objects through the slots and openings of the LCD TV (electrical

shock, short circuit and fire hazard)!

 The slots and openings on the LCD TV are for ventilation purposes. Do not cover

these openings (overheating, fire risk)!

 Do not put any pressure on the display. There is a risk that the screen may break.

 The remote control has a class 1M infrared diode. Never use optical devices to

look at the LED.

 The DVD player is a first class laser product. The unit has a safety system that

prevents dangerous laser rays from escaping from the unit during normal use. In
order to avoid eye injuries, never manipulate or damage the security system of the
device.

 Caution! There is a risk of injury if the screen is damaged! Recover all broken

pieces using protective gloves and send them to your Service Centre for proper
waste disposal. Then wash your hands with soap because chemicals may have
leaked out.

 To avoid damaging the screen do not touch it with fingers or sharp objects.

 Contact customer services on 1300 884 987 if:

- the power cable is burnt or damaged

- liquid has penetrated the device

- the device is not operating correctly

- the device has fallen, or the casing is damaged

11

A

Set-Up Location

 In the first hours of operation, new devices may emit a typical, unavoidable but

completely harmless smell, which will decline increasingly in the course of time.
We recommend that you ventilate the room regularly, in order to counteract the
formation of the smell.

 Keep your LCD TV and all connected devices away from moisture and avoid dust,

heat and direct sunlight.

 Do not use the device outdoors because other effects such as rain, snow etc. can

also damage the device.

 The device must not be exposed to water droplets or spray. Do not place objects

that are filled with water (such as vases) on the device. The container may tip over
and the liquid will impair the electrical safety.

 Do not operate the device near water and do not set it up near a wash-hand basin

or bath, etc.

 Do not place any exposed sources of ignition (candles or similar) on

or near the device.

 Make sure that there is enough clearance in the wall units! Ensure a

minimum separation of 10 cm around the device for sufficient ventilation.

 Operate all components on a stable, level and vibration-free base, to prevent the

LCD TV from falling over.

 Avoid dazzle, reflections and strong bright-dark contrast in order to protect your

eyes.

 The optimal viewing distance is 5 times the screen diagonal.

Repairs

 Repairs to your LCD TV should only be carried out by qualified specialists.

 Please contact our Help Desk on 1300 884 987 if you have any problems with

your LCD TV. ALWAYS have repairs completed only by our authorised service
centre.

 Make sure to use only replacement parts provided by the manufacturer. The

device may sustain damage if unsuitable replacement parts are used.

12

A

Intended Environment

 The device can be operated at an ambient temperature of +5° C to +40° C and a

relative humidity of 20% - 85% (non condensing).

 In the switched-off state the LCD TV can be stored from -20° C to +60° C.

 Keep the device at a distance of at least one metre from high frequencies and

magnetic sources of interference (television, loudspeaker boxes, mobile
telephones etc.) to avoid malfunctioning.

 After transporting the LCD TV wait until the device has reached ambient

temperature before switching it on.

 Large changes in temperature or fluctuations in humidity can cause moisture to

build up due to condensation within the LCD TV, which can cause an electrical
short circuit.

 During thunderstorms or if the device is not going to be used for long periods,

remove the plug from the mains socket and the aerial cable from the aerial socket.

13

A

Power Supply

Please note

Even when the mains switch is off some components of the device
are live. In order to disconnect the power to your LCD TV or to
completely isolate the device from voltage sources remove the mains
plug from the mains socket.

 Only plug the LCD TV into an earthed socket with 100-240 V~ 50/60 Hz. Contact

you electricity provider if you are not sure if the socket is earthed or not.

 The socket must be near the LCD TV and easily accessible.

 In order to disconnect the power to your LCD TV or to completely isolate the

device from voltage sources remove the mains plug from the mains socket.
Always grab the plug firmly when unplugging it from the socket. Never pull on
the lead.

 For extra safety, we recommend using an over-voltage protection device to

prevent your LCD TV sustaining damage as a result of power surges or lightning
strikes.

 If you are using an extension cable, make sure that it complies with VDE

requirements. If in doubt, contact your electrician.

 Position the cable so that nobody is able to step on it or trip over it.

 Do not place any objects on the cable to avoid damaging it.

14

A

Battery Handling

Batteries can contain combustible materials. If not handled correctly batteries can
leak, become very hot, ignite or even explode, which could damage your device
or/and your health.

Please ensure compliance with the following advice:

 Keep batteries away from children. Contact your doctor immediately if a battery is

swallowed.

 Never charge batteries (unless it is clearly indicated).

 Never discharge batteries by high power output.

 Never short-circuit the batteries.

 Never expose the batteries to excessive heat such as sunshine, fire or similar.

 Do take apart or deform the batteries. Your hands or fingers could get injured or

battery fluids could get into your eyes or onto your skin. If this should happen
then rinse the affected areas immediately with a large amount of clean water and
contact your doctor immediately.

 Avoid heavy impacts and vibrations.

 Always observe the correct polarity.

 Make sure that the plus (+) and minus (-) poles are correctly inserted in order to

avoid short circuits.

 Never mix new and old batteries or different types of batteries. This could cause

your device to malfunction. In addition, the weaker batteries would discharge too
much.

 Immediately remove used batteries from the device.

 Remove the batteries from the device if you do not intend to use it for a long

period of time.

 Replace all the old batteries in a device with new batteries of the same type.

 Isolate the contacts of the batteries with sticky tape if you want to store or dispose

of them.

 Clean the contacts on the battery and device before inserting.

15

A

Information about Conformity

The device fulfils electromagnetic compatibility and electricity safety requirements.

Your device complies with the basic requirements and the relevant Australian EMC
guidelines [electromagnetic compatibility] and the Australian electrical safety
guidelines.

This device fulfils the basic requirements and the relevant regulation of the Ecodesign
Guideline 2009/125/EG (Commission Regulation 1275/2008).

16

A

Start of Operation

Note

Before starting up please make sure that you read the "Safety instructions"
section on page 11.

Unpacking

 Select a suitable place for setting up the appliance.

 Open the box very carefully to avoid damaging the appliance. The device could

be damaged if you use a knife with a long blade to open the box.

 The box contains a number of small items (including batteries). Keep these items

out of reach of children; the parts are easy to swallow.

 Store the packaging material in a safe place; only use this box to transport the TV.

CAUTION!

Do not let children play with the plastic film. There is a risk of
suffocation!

Installation

Attach the base stand as shown in the drawing. Carry out this step before connecting
the LED LCD TV.

17

A

Inserting the batteries in the remote control

 Open the battery compartment cover on the back of the remote control.

 Insert two (AAA) 1.5-V batteries in the battery compartment of the remote

control. Check the battery polarity (inscribed on the bottom of the battery
compartment).

 Replace the cover.

Note

Remove the batteries if the device will not be used for long periods. The
remote control can be damaged by leaking batteries.

Connect TV aerial

 To connect to the house antenna or cable system, connect a double-screened

cable from the antenna socket to the LCD TV.

DVB-T mode

You will have the possibility of receiving DVB-T by means of a corresponding aerial, if
it is offered at your location. An additional receiver will not be necessary to receive
DVB-T channels.

Connecting a DVB-T aerial

 Plug the connector of a DVB-T aerial into the aerial socket of the device.

Connecting power supply

 Connect the power cable supplied with the device to the 220-240V ~ 50 Hz

connection on the back of the unit and insert the plug into a 220-240 V ~ 50 Hz
mains socket near the device.

Switching the LCD TV on and off

 Switch the power button to “

to standby mode and the display on the front will light up red.

I

” to active the power supply. The device switches

 To switch on the unit either press the button on the remote control or the

POWER

light up green.

18

button on the right-hand side of the unit. The display on the front will

A

 Press the button on the remote control or the

hand side of the unit to switch the device over to standby mode again. The unit
continues to consume power in this mode.

 Press the mains switch at the back of the unit to switch it off completely.

POWER

button on the right-

After switching on the unit for the first time

You will be guided through the
device on for the first time.

You can always access the first-time installation screen again via

Installation

 Select a language with the directional buttons and press OK.

 Select the country required with the directional buttons. The country setting will

and go through the settings again. See also page 42.

have an influence on the sequence in which the channels are stored. Press.

First Time Installation

menu after you switch the

Functions > First Time

Searching occurs in the order of the various program types. Wait for it to finish. You
can use the

Note

Consider a DVB-T aerial if you are searching for digital channels.

MENU

button to cancel the search prematurely.

19

A

Channel selection

 To select a channel, either press the buttons P+/– (on the device or on the remote

control) or select the channel directly by pressing the appropriate numbers.
To enter a two or three-digit number press the
then enter the two- or three-digit channel number.

 Press the button to select the last channel played.

-/--

button twice or three times and

Setting the volume

 You can increase or decrease the volume by pressing the volume buttons

on the remote control or on the device.

 Use the button to switch the volume fully off and on again.

 Use the

Sound I and sound II can only be heard when the current TV channel supports
dual mode (e.g. for bilingual programs).

 Use the

Standard, Music, Movie, Sports, Personal. The Personal setting is defined under
the menu option SOUND > Sound Mode.

AUDIO

SMODE

button to select mono or stereo playback, sound I and sound II.

button to switch between the following sound modes:

20

A

Picture Setting

 Use the

Standard, Dynamic, Mild, Personal. The Personal setting is defined under the
menu option PICTURE > Picture Mode.

 Depending on the program, the pictures are displayed in the formats 4:3 or

16:9. Use the

Auto: The format displayed is automatically adjusted to match the input
signal.

4:3: For undistorted screen
display in 4:3 format.

16:9: A 16:9 picture (“letterbox“)
is zoomed to the full screen size.

Zoom1: For undistorted screen
display in 14:9 format.

Zoom2: A picture in 14:9 format
(“letterbox“) is stretched at the
top and bottom margins of the
screen.

P.MODE

ASPECT

button to switch between the following picture modes:

button to adjust the picture format:

You can also change these settings in SETUP > Aspect Ratio.

Note:

Please note that not all picture formats will be available depending on the
image source setting.

21

A

Displaying Information

 Press the

– Channel position
– Color System
– Sound System

 You can get the same information when you switch over to a different channel.

INFO

button to display the following current settings:

Favourites List

You can enter a list of your favourite channels under the menu options CHANNEL >
Program Edit (see page 39).

FAV

 Press

 Use the direction buttons  or the buttons

to display your list of favourite channels.

FAV -

/

FAV +

to select a channel.

Input Source Selection

 Use

INPUT

available:

ATV TV mode (analogue signal)
DTV TV mode (digital signal)
Media Playback of media via USB
AV 1 Device on AV input
PC Device on PC input
Component Device on the video and audio input components
DVD Inbuilt DVD Player
SCART/AV2 Device on SCART input
HDMI1 Device on HDMI 1 input
HDMI2 Device on HDMI 2 input

to call up the source selection list. The following sources are

 Use the direction arrows  to go to the desired source.

 Confirm your selection with OK.

22

A

DVD Mode

The inbuilt DVD player is managed via DVD Mode.

Switching between TV and DVD Mode

 Use

 Use the direction arrows to go to DVD.

 Confirm your selection with OK.

 To return to TV mode, repeat this process. But instead of DVD, now select the

INPUT

option ATV or DTV, depending on the type of signal.

to open the source selection list.

Inserting a DVD

Note

The integrated DVD player only supports media with a diameter of 12 cm. Do
not insert any media with a smaller or a larger diameter in the DVD slot, to
avoid damage.

Note

The DVD must be aligned with the printed side towards the back (back of the
LED LCD TV).

Note

The LED LCD TV must be set to the DVD Mode, so that you can insert a DVD
into the DVD slot.

 Place the DVD into the DVD slot with the printed side towards the back. The

DVD will be recognised and drawn in automatically if the LED LCD TV is set to
the DVD Mode. Loading followed by Reading appears on the screen. The replay
will normally be started automatically.

Note

It can be necessary to start replay manually in some cases. Press the button
to do this.

23

A

Button function

Special display message

If you select a function which is not available on the disc you have
inserted or cannot be accessed in the current mode, the ‘not valid’
symbol shown here will appear on the screen. The symbol disappears
after a few seconds.

 Playback

 Press the button to start or pause playback. Press the button again to

continue playback.

 (Stop)

 Press  once to stop playback. In this mode, you can continue on from the

same point by pressing .

 Press  again to stop the DVD completely. The device is now in stop mode.

/ (Skip)

 During playback, press the  or  key to skip backwards or forwards (for DVDs:

from chapter to chapter; for CDs: from track to track).

Note

Please note: on many DVDs, it is not possible to skip the track/chapter before
the actual film starts (see licence notes).

/ (Forward)

 During playback, press the  or  button to start fast forward or rewind. The

speed increases if you press the button repeatedly: 2x > 4x > 8x > 16x > 32x. If
you press the button again or press , you return to the normal playback
speed.

GOTO (direct search)

You can use the GOTO button to jump straight to a chapter, track or time. You
change the selection each time you press the button. Playback starts at the selected
spot.

 You can also enter a track directly via the number keys, without first pressing

GOTO.

24

Playback starts right at the place selected.

A

DVD

 Press GOTO once: enter the desired chapter within the title.

 Press GOTO twice: enter the desired time within the title in the format H:MM:SS.

 Press GOTO three times: enter the desired time within the chapter in the format

H:MM:SS.

Audio CD/VCD

 Press GOTO once: Disc Go To – enter the desired time on the CD in the format

H:MM:SS.

 Press GOTO twice: Track Go To – enter the desired time within a track in the

format H:MM:SS.

 Press GOTO three times: Select Track – enter the number of the desired track.

 You may also enter the track number directly, without using the GOTO button.

MP3/WMA

 Press GOTO once: Enter the desired title (three digits – put “0” or “00” in front,

if required).

 You may also enter the track number directly, without using the

 Press GOTO twice: enter the desired time within the track in the format MM:SS.

GOTO

button.

Xvid

 Press GOTO once: enter a desired track.

 Press GOTO twice: enter the desired time within the track.

D.DISP (time display)

Press D.DISP repeatedly during playback to display first the elapsed time and then the
remaining time. You will see a corresponding screen message each time you press the
button:

DVD:

Playback time: Track > Elapsed: Track > Playback time: Chapter >

Time remaining: Chapter -> Display off

CD/VCD/Xvid:

MP3/WMA:

Time remaining: current track > Playback time: current track >

Playback time: total > Time remaining: total

shows playback status and volume level.

25

A

REPEAT

Press the yellow button [
the screen and, each time the button is pressed, so does the section to be repeated
(the entry disappears after a few seconds):

DVD: Chapter > Title > ALL

Audio-CD: Title > ALL

MP3/WMA/VCD: Playback: 1 Title > Repeat Title > Repeat Folder > Playback:

1 Folder

REPEAT

] during playback. The repeat symbol appears on

PROGRAM (playback sequence)

The programming function allows you to play up to 20 chapters (DVD) or tracks
(audio) in any order you specify.

Programming is not possible with MP3 media.

How to program the sequence:

 Press the red PROGRAM button. A table with spaces for programs appears on the

screen.

 Use the remote control buttons to enter the number of the desired track (TT) for

program space 01. Please place a 0 in front of single-digit numbers.

The number of tracks is shown at the top of the table.

 For DVDs, now also enter the desired chapter (CH).

The cursor jumps to program position 02.

Enter the remaining program spaces in the same way.

Start list

 As soon as the first program space has been entered, the word START appears at

the lower edge of the menu.

 Use the arrow keys to move the cursor to “Start” and press

list starts to play.

 During playback, press the STOP  button twice to delete the list.

You can reopen the list by pressing the red

OK

. The programmed

PROGRAM

button.

26

A

LANG (Audio Setting (Language))

 Press

LANG

channel audio or 5.1 channel surround sound) or the required spoken
language.

Note

Please note that this function is not available on all DVDs.

repeatedly to select another audio setting on the DVD (e.g. two-

The change is made immediately and does not need to be confirmed.

Open DVD menu

Using the

The

D.MENU

menu.
each selection with OK.

Note

Please note – it will depend on the DVD as to which requests open which
menus.

TITLE

and

D.MENU

button usually opens the main menu and the

buttons, you can open the menus stored on the DVD.

TITLE

button the track

You navigate to the items in the DVD menu using the arrow keys. Confirm

Navigating on MP3 and JPEG data media

The music tracks on MP3 and JPEG data media may be organised into folders just like
on other data storage media.

 Insert an MP3 or JPEG CD into the player.

the top-level folder structure.
If the data media contains folders, they are listed here.
An MP3 file is displayed by an MP3 symbol.
The surface of the active folder or file is shaded orange. The total number of the
files in the folder appears in the top row.

 Use one of the arrow keys   to enter the folder and confirm with OK.

Other subfolders may open if present.
level menu, using the left arrow key  or via the top menu item.

 To listen to a particular track or view a particular picture, select it and confirm

with  (PLAY) or OK.

A menu appears on the screen, showing

If they do, you can go back to the higher-

27

A

JPEG Images

With JPEG images you will see a preview of the image on the right-hand side of the
menu.

 Select an image and confirm with OK to view a large image. All images within the

active folder can be displayed in succession (slide show).

 You rotate the picture by holding down the arrow keys  .

Please note that it might not be possible to display very large pictures.

SETUP menu in DVD mode

 While the DVD is running, press the

main page appears on the screen.
mode:

General Setup
Audio Setup
Digital Setup
Preferences Page

DVD SETUP

button. The SETUP menu’s

The following menus are enabled in DVD

Navigating in the menus

 Choose between the menus using  . The enabled menu is shaded orange. Use

  to select menu items and the items you choose appear on the right side.

The active setting is highlighted in brown.

 To change a setting, use  to go to the right side and use   to choose another

Press

item.

 Press  to return to the upper menu selection.

 Press DVD SETUP at any point to quit the SETUP menu.

 You cannot open the SETUP menu during playback.

pressing  (STOP) twice.

OK

to confirm.

If necessary, stop playback by

Menu: General Setup

TV format

Here you set the unit’s display format to match that of the television.

4:3 PS

4:3 LB

16:9

28

Selection for televisions with a 4:3 format. The Pan Scan format

displays 16:9 film formats at full height; side sections of the image
are cut off.

Selection for televisions with a 4:3 format. The letterbox format

reduces the 16:9 film format to the size of the screen.

Selection for televisions with 16:9 format.

A

OSD Language

This sets the OSD (On-Screen-Display) language, i.e. the language for the DVD player
menus. When selecting a language the menu changes immediately.

Last Memory

The DVD player will remember the position at which you stopped the most recently
inserted DVD, with this function. The replay will begin at the most recent position, if
the same DVD is reinserted in the device. The last position on the DVD will even be
retained if you switch off the device.

Menu: Audio Setup

To set the sound mode, select the Soundmode Setup menu item.

Downmix

If you use the analogue output, you can make adjustments in this menu.

Surround
Stereo This option produces stereo sound.

Choose this setting if you wish to play surround sound.

Choose this setting if the sound is played through two speakers
only.

Menu: Digital Setup

Dual Mono

Choose between four different audio outputs.

Dynamic

The Dolby Digital sound format supports a dynamic setting, which you can use to set
the volume difference between quiet and loud passages with a scale of Off to Full in
nine steps.

Off The sound is reproduced without changes, i. e. loud passages and

bass sounds are loud and quiet passages are quiet (cinema sound).
This setting is only appropriate if nobody will be disturbed.

Full The volume difference is minimised, i. e. loud passages are quieter

and quiet passages are louder. This setting is appropriate, for
example, at night.

 To change the setting use  to access the scale on the right hand side and then

use  or  to selected the desired value. Confirm with OK.

29

A

Menu: Preferences Page

TV Type

Select the colour standard for the image replay here:

PAL The usual colour format in many European countries.

AUTO Automatic setting to the correct colour format.

NTSC The usual colour format in North America.

Audio

The DVD’s default language track is preset here, provided the DVD has multiple
language tracks.

Subtitle

Here you can set the default language for the subtitles stored on the DVD, provided it
contains subtitles.

Disc Menu Lang.

Here you can choose the language for the menus stored on the DVD, provided
multiple languages are available on the disc.

Parental

You can set the authorisation level for DVDs (parental control) here.

Some DVDs and CDs are encoded with encryption signals in line with the
authorisation classes established by the Motion Picture Association. The eight
authorisation classes are:

1 Kid suitable for small children;

2 G for all age groups;

3 PG recommended from age six, under parental guidance;

4 PG-13 recommended from age 12;

5 PG-R for young people

under-17s parental guidance recommended;

6 R Not suitable for young people under 16;

7 NC-17 Not suitable for young people under 18;

8 Adult For adults only

For example, if you have inserted a DVD that is coded with authorisation class 7 (from
age 18) or 8 (Adult) and you have selected authorisation classes 1 to 6, a message
appears and the viewer must enter a password. Parts of a DVD – certain scenes, for
example – may also be encoded with an authorisation class or a range of
authorisation classes.

30

A

Password

With this option a password can be entered so as to restrict access to the player by
others.

 Confirm the entry Change with OK.

Old Password Enter the existing password with the number keys on the remote

control. It comprises exactly four digits. If no password has been
entered, the default password is valid 0000.
The next entry field becomes active when you enter the correct
password.

New Password Enter a four-digit password using the number keys on the remote

control. The bar moves to the next field.

Confirm PWD Enter the four-digit number again.

 Press OK to confirm the new password.

If you forget the new password, enter the master password 7948.

Default

 Confirm Reset twice with OK, to reset the unit to the factory settings.

Note

Please note that a changed password is not reset.

31

A

Operation through the Remote Control

The following functions of the DVD player are available to you through the remote:

32

A

Media Mode

The LED LCD TV comes with 1 USB port (rear) that can be accessed via Media mode.

Media Mode and USB Connectivity

 Plug in your external USB device (USB stick, external hard disk drive) into the

USB port of the TV. Drive numbers (C:\, D:\, E:\ etc) will be allocated depending
on the partitions of the USB device (e.g. an external hard disk drive might have
several partitions). For the definition of how drive numbers are assigned, please
see “Drive Assignment Definition” below. (Please note that external USB
memory devices of a capacity of up to 1 TB are supported. However, not all
brands and drivers of external USB memory devices might be compatible with
this LED LCD TV)

 You can select the drive for your recording session.

 Please note that the external USB device needs to be formatted first before the

recording can be done. To do this, under DTV mode, in the OSD, go to SETUP
page then select “PVR File System”.

 Select disk drive by pressing “OK”.

 At the next screen you will have option to select USB device if there is more then

one and to select drive with directional pad on the remote control (C:\, D:\ etc)

 Press “ok” to format.

 You can select to format the USB device into FAT32 file system or High Speed FS

system by using directional pad on the remote control:

 FAT32 is suitable for USB thumb drive (USB memory sticks) that will format the

entire USB drive completely. (Attention: All data currently on the USB memory
stick will be lost. Please save your data on your external USB memory stick
prior to using it as a recording device)

 High Speed FS is suitable for external USB hard disk drives that will allow

choosing how large a new partition allocated for recording will be.

 While recording, on your external USB device a new folder will be created

labelled “MSTPVR”.

 The OSD will show the file format and size selected, how many minutes of the

TV program can be recorded in either SD quality or HD quality from the source
media.

 After selecting the system type and size, press OK again will start the formatting.

 After the USB device has been formatted, it can be used for recording under DTV

mode.

 The default recording drives will always be C:\, unless different drive is selected

using method from 2-7. (Please also refer to the part “PVR Function and Drive
Assignment” of this manual).

34

A

 The recording function can be achieved in 2 ways:

 Press the record button (PVR = Red Colour Button) directly while watching

DTV programs.

 Through EPG scheduling function.

Recording via record button (PVR or red
button)

While watching DTV programs, press the PVR button (red button) on the remote
control.

A symbol for recording will be shown in the upper left-hand corner of your screen.

Make sure that the allocated capacity for the recording is sufficient to complete the
recording of the program you want to save. (The capacity is determined by how large
the formatted PVR file folder is allocated, or how large the USB thumb drive can
support.)

Recording via EPG Scheduling

 In DTV mode, press EPG button to call out the EPG interface.

 Select the program that you wish to record via the date and time inside the EPG,

and then press the Red button (record).

 The interface will show the start time and end time of the recording.

 Select the recording mode. The options are:

 AUTO Mode: The time will be fixed according to the selected program. Only

the selected program will be recorded from start time to end time.

 ONCE Mode: Allows setting the timer. Date and time of the recording can be

set manually. The recording will be done only once.

 EVERY DAY Mode: Allow setting the timer yourself. Date and time of the

recording can be set manually. The recording will be repeated every day
accordingly during the set time frame.

 WEEKLY Mode: Allow setting the time. Date and time of the recording can be

set manually. The recording will be repeated once every week on the day and
time that has been set manually.

 Press OK after the setting to save the scheduling time

 Please note that recording schedule via the EPG interface will only work when

the TV is not switched off (has to be on or in standby mode).

 The recording schedule will continue to work in the background in Standby

mode.

 The TV will switch from Standby mode to operational mode (ON) to start the

programmed EPG scheduled recording session.

 After the recording has been completed the TV will stay in operational mode

(ON).

35

A

 If you want the TV to switch back to Standby mode after the recording has been

completed (switching back from ON to Standby) please use the “Auto Standby”
function in the TIME OSD menu to set the “Auto Standby” time (starting from 3
hours).

 Using the “Auto Standby” function will ensure that the TV will switch back from

operational mode (ON) to Standby mode according to the set time.

 Please ensure that the time set via the “Auto Standby” timer is longer than the

time set for the recording session to allow that your program has been fully
recorded.

 The scheduled recording can be checked via the EPG interface any time. For this,

please press the Yellow button (schedule button) on the remote control.

Time Shift function

 During any recording, you can press the “Play” button to start watching the

program that is being recorded. The recording itself will continue in the
background while you can watch the recorded program from the start.

 While watching/playing the recording program this way, you can use all the

media functions (fast forward, fast backward and pause etc) for the playback.

 Press the STOP button to stop the watching session and return to the recording

interface.

36

A

Switching between TV Mode and Media Mode

 Use

 Use the direction buttons to go to Media.

 Confirm your selection by pressing OK.

 Repeat this process to return to TV mode but, instead of selecting Media, choose

AV/INPUT

the option ATV or DTV, depending on the type of signal.

to call up the source selection list.

Media Menu System

As soon as you have connected an external USB device to the TV and have switched
the source to Media, you can choose between the following four media to be played
back:

 PHOTO - To play back photo files

 MUSIC - To play back music files

 MOVIE - To play back movie files

 TEXT - To display texts (*.txt)

Depending on the selected option you will have various available functions. These
will be shown in the lower part of the screen.

37

A

Basic OSD Menu Settings

You can customise certain functions of the OSD (On-Screen Display) menu.

Navigating within the Menu

 Press the

The available options are displayed on the lower edge of the screen.

 You can use the direction keys  to select the options from the main menu.

 Use  to switch over to the menu entries.

 You can use the direction keys  to select the options from any of the menus.

Press

 Use the direction button  to access a sub-menu (not every menu has a sub-

menu option).
Press

 Use the direction buttons  to enter a desired value or make another

selection.

 Press

Please remember that the menu will close automatically after a couple of seconds if
you don't press a button.

MENU

MENU

MENU

MENU

button to activate the OSD.

to return to the main menu.

to return to the next-higher menu.

to close the menu and also confirm your selection.

You can select the following main menus:

Menu CHANNEL



 Menu PICTURE

 Menu SOUND

 Menu TIME

 Menu LOCK

 Menu SETUP

Note

Technical changes to the device means the menus described here may differ
from the menus actually displayed on the screen.

Not all menus will be available, depending on the source you have selected.
Switch to a different source to access all available menus.

38

A

Menu System

CHANNEL Menu

Menu item Setting

Auto Tuning

DVB-T Manual
Tuning

ATV Manual
Tuning

Program Edit

Perform the search here.

You can program individual channels in DTV mode manually
here.

You can program individual channels in ATV mode manually
here.

Current CH

Colour
System

Sound
System

Fine-Tune

AFC

Search

You will see the currently saved channel here. Each channel can
be customised as follows:

Delete

Use this to select the channel you would like to
address.

PAL, SECAM, Auto. For Australia, the colour
system is set to PAL.

BG, DK, L, I. For Australia, the sound system is
set to BG.

Press  to carry out the fine adjustment.

Set the automatic fine adjustment to On if this is
your continuous choice.

Start the channel search with 

Select the program you would like to delete and press the red
button on the remote control called [

Press the Yes  key if you are sure that you wish to reset the
transmitter. Press the No key if you wish to stop the process.

PROGRAM

].

39

A

Rename

Select the transmitter that you wish to rename and press the
green [

Now, you will be able to change the first letter; you will be able
to scroll up and down through the letters with the 
direction keys.
Move to the next drive letter with  direction key, etc.
Press the green [

Move

INTRO

] key.

INTRO

] key again at the end to save the name.

Signal
Information

Select the program and press the yellow button [
the channel with  to the desired position and press the
yellow button [
rearranged accordingly.

Skip

Select the channel you would like to skip while scrolling through
the channels using the buttons
button [

You can still select this channel by using the number buttons.

Fav

To save a station to a favourites list, highlight it and press the
button
control buttons.

The signal information of the set station is displayed here.

This option is only available in the DTV mode.

A-B

FAV

REPEAT

].

. Call up the favourites list by using the remote

] again. The other channels will be

CH+/-

and then press the blue

REPEAT

]. Move

Tuning the Video Recorder (VCR) Manually

You can use ATV Manual Tuning, for example, to tune a video recorder (VCR) to the
LED LCD TV.

Connect the TV and the video reorder via the antenna cable and set the video
recorder to the test signal.

Perform a manual channel search with the LED LCD TV.

40

A

PICTURE Menu

Menu Item Setting

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

Colour Temp

Noise Reduction

Dynamic CR

HDMI Mode

Select picture mode: Standard, Soft, Personal, Dynamic. This
function corresponds to the
The Personal setting lets you set the Contrast, Brightness,
Colour, Tint and Sharpness yourself. The other parameters are
defined.

Increase or decrease contrast (on a scale of 0 – 100).

Increase or decrease brightness (on a scale of 0 – 100).

Increase or decrease colour (on a scale of 0 – 100).

Hue settings only available for NTSC reception.

Increase or decrease sharpness (on a scale of 0 – 10).

Select colour temperature: Cold, Normal and Warm.

This function reduces picture noise and improves image quality
when the signal is weak. Choose between Off, Low, Middle,
High and Default.

Switch the dynamic contrast on or off.

Precise representation in pixels (1:1 setting) or enlarged
representation according to the connected HDMI source
(OverScan setting).

P.MODE

button.

This setting is only available in the HDMI Mode.

41

A

SOUND Menu

Menu Item Setting

Sound Mode

Treble

Bass

Balance

Auto Volume

AD Switch

EQ

Select audio mode: Standard, Music, Movie, Sports, Personal. This
function corresponds to the
The Personal setting lets you set the Treble, Bass and Balance
yourself. The other parameters are defined.

Increase or decrease treble (on a scale of 0 – 100).

Increase or decrease bass (on a scale of 0 – 100).

Set the balance between the left and right speakers.

The function AVL (Automatic Volume Limiting) compensates for
the various volumes of the different channels. If you set to Off, you
will hear the original volumes. If you set to On, you will hear a
balanced volume.

Activate narrator mode. Available only in DTV mode. Support
depends on the network provider.

Set the equaliser and optimise the sound to your individual taste.

S.MODE

button.

42

A

TIME Menu

Menu Item Setting

Clock

Time Zone

Sleep Timer

Auto Standby

OSD Timer

Time display. No setting possible.

This lets you set the time zone.

This option is only available in DTV mode.

Select a time after which the device should switch itself off
automatically.

Select Off to end the function.

Set the time by which the LED LCD TV will switch itself off
automatically here.

Set the time after which the OSD menu will close automatically.

43

A

LOCK Menu

Menu Item Setting

Lock System

Set Password

Block
Program

This is used to unlock the settings Block Program, Parental
Guidance and Key Lock. To do so, enter the password. Delivery

state: 0000.

An input field for entering the passwords will appear.

Please enter
old password

Please enter
new password

Confirm new
password

Information

Note the new password. It will not be set back at the
recreation of the factory settings.

Use 7948, the master password, if you have forgotten your
password.

Specify here which stations should be blocked.

Use the number buttons to enter the existing
password. Delivery state: 0000.

Enter a new four-digit password.

Enter the new password again. The appropriate
message will appear.

Parental
Guidance

Key Lock

44

Here you can select the age.

This is used to switch the button lock on and off for the controls on
the LED LCD TV. The LED LCD TV can then only be operated by
using the remote control.

A

SETUP Menu

Menu Item Setting

OSD Language

TT Language

Hearing Impaired

PVR File System

Aspect Ratio

Select the language of the OSD menu or of the TT language.
It will change immediately.

This setting is to select the language of the teletext reception
function of the TV. Teletext/Austext service has been
discontinued in Australia, therefore this setting has no effect.

If the station transmits special audio signals for the hearing
impaired, you can set the setting to On to receive these
signals.

This option is only available in DTV mode.

You will be able to record on a USB storage medium through
the USB connection with your LED LCD TV. The USB storage
medium will have to be formatted before you can start the
recording. Carry out the formatting by means of this Menu
point.

You will start the recording directly by means of the red

PROGRAM

[

Set the picture format here.

This function corresponds to the button

] button or through the EPG Menu.

ASPECT

.

Blue Screen

First Time
Installation

Reset

If the LED LCD TV is not receiving a signal, the screen will
turn blue instead of displaying the “snow” or a black
background.

Here you can access the menu for the initial installation.

Restore the factory settings here. This allows you to reset the
device or the memory.

45

A

EPG - PROGRAM GUIDE

Open the Electronic Program Guide with the
available to you in the DTV Mode.

You will see the current and the next station in the Table.

 Select a program with .

 Go to the program guide of the program selected with

 Scroll through the stations with  .

Pay attention to the fact that:

The program information displayed is created by the transmitting
organisations. It will not be an error in your LED LCD TV if no program
information is shown.

The following Table shows the options for the PROGRAM GUIDE:

Button Entry Function

Red Button

PROGRAM

[

Record

]

Set the start and end of the recording on the external
storage medium here.

EPG

button. This function will only be

Green Button

INTRO

[

]

Display

You will be able to make the following settings under
Mode:

Auto = The time will be entered automatically,
according to the program selected

Once = Manual entry of the recording. The recording
will only be made once at the pre-set time.

Every Day = Manual entry of the recording. The
recording will be started daily at the pre-set time.

Weekly = Manual entry of the recording. The recording
will be started weekly at the pre-set time.

Only press the button once to leave the Recording
Menu.

Shows a detailed description of the marked program (if
available). Press the button again to fade out the
description.

46

A

Yellow
Button

REPEAT

[

Blue button

A-B

[







OK

]

]

Schedule

Remind

Move View

Next Day

Previous
Day

OK

Shows the list of the programs that have been
programmed by the Memory function. See the next
point for the programming of a memory.

You can delete a program from the timetable with the

PROGRAM

red [

Puts the selected program into the timetable. The
device will switch to the program set automatically as
soon as the time programmed is reached. .

It will not be possible to store the current program in
the memory.

Move within the Program Guide with the direction
buttons.

The program of the next day will be called up.

The program of the previous day will be called up.
This is only possible on the current day. The past
program will not be shown.

Confirm your selection or the setting.

] button.

47

A

Connecting External Devices

Connecting Headphones

The headphones are connected via headphone socket.

Caution!

Using headphones at high volume generates excessive acoustic pressure and
can result in permanent hearing damage. Before pressing play, set the volume
to the lowest setting. Start playback and increase the volume to a comfortable
level. Changes to the basic equaliser settings can increase the volume and thus
damage your hearing permanently.

Using headphones to listen to a device at high volumes for an
extended period can damage your hearing.

Connecting an External DVD Player

There are a number of options for connecting a DVD player.

1. With a SCART Adapter

If the external DVD Player is equipped with SCART connection, then connect the DVD
Player directly to the SCART connector at the back of the TV.

2. Stereo RCA Cable and a Video RCA Cable

If connecting RCA AV (yellow, red and white connectors) output from the DVD Player,
then follow this procedure:

 Connect video RCA cable (yellow jack) to the video input of the SCART adapter.

 Connect stereo chinch cables (red and white jacks) to the audio input of the

SCART adapter.

 Plug in SCART adapter to the SCART connector at the back of the TV.

48

A

3. Component Video Cable (3 x RCA)

 If the DVD player has component outputs, we recommend connecting the

player to the Component inputs on the LED LCD TV using a component cable
(RCA cable green/blue/red).

Important!

Use the component adapter supplied with the device exclusively.

 Connect a stereo RCA cable (red and white jacks) to the AUDIO L – R inputs to

transmit audio.

4. HDMI Cable

 If your device has a HDMI output, connect a HDMI cable (not supplied) to the

HDMI input of the LED LCD TV and to the HDMI output of the external device.

Connecting a Camcorder

With a Stereo RCA Cable and a Video RCA Cable

 To play back images and sound on your LED LCD TV connect the camcorder to

the AUDIO-IN sockets and VIDEO-IN sockets on the LED LCD TV.

49

A

Device with HDMI or DVI Output

HDMI ("High Definition Multimedia Interface") in consumer electronics is the only
interface that transmits audio and video data simultaneously. It handles all image and
sound formats currently in use, including HDTV (High Definition TV), which means it
can also display resolutions of 1080i without any loss in quality.

Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI
outputs.

Connecting an External Device with HDMI Output

 Switch both devices off.

 Connect a HDMI cable (monitor cable; not supplied) to the HDMI input of the

LED LCD TV and to the HDMI output of the external device.

 Switch the LED LCD TV on when the HDMI device is connected.

 Switch on the external HDMI playback device.

Connecting an External Device with DVI Output

If the external device has a DVI output then you can also connect it to the HDMI input
(HDMI is downwards compatible to DVI – “Digital Visual Interface”). For this you will
need a HDMI-DVI adapter. The DVI output does not transmit sound so you will have
to connect an audio cable in addition.

Connect a stereo RCA cable with 3.5-mm jacks to the VGA AUDIO-IN socket to
transmit sound.

50

A

Connecting a PC or Notebook

The LED LCD TV is connected to your PC or Notebook like a monitor or additional
monitor. The picture on your notebook or PC is then transmitted to the LED LCD TV.

Connect the LED LCD TV to the PC as follows:

 Switch both devices off.

 Connect a VGA cable (monitor cable; not supplied) to the VGA input of the LED

LCD TV and to the graphic card output of the PC or Notebook.

 Tighten up the screws of the monitor cable with your fingers, so that the plug is

correctly seated in the socket.

 If you want to transmit a sound signal, connect an audio cable from the PC

AUDIO-IN socket and PC/notebook Audio output

 First switch on the LED LCD TV.

 Then switch on the PC/notebook.

If you use the LED LCD TV as a second monitor for your PC you might have to change
the display properties of your operating system. To do this please read the operating
instructions of your PC/notebook to find out the operational requirements if more
than one monitor is used.

51

A

Troubleshooting

Malfunctions can sometimes have quite trivial causes, but on other occasions they are
the result of defective components. We would like to give you a few options for
rectifying your problem. If these tips don’t do the trick, then we’ll be more than
pleased to help you out. Just give us a call! You’ll find the phone numbers on the
back inside cover, under the warranty conditions.

Fault Solution

There is no picture
and no sound.

There is no picture.
There is no AV
picture.

There is no sound.

There is no picture
and no sound. I can
hear noise, though.

The picture is not
clear.

 Check if the power cable is inserted properly into the

socket and connected properly to the device.

 Check if the signal receiver is set to TV.

 Check to ensure the switch on the power cable is on.

 Check to ensure the contrast and brightness settings are

correct.

 Check if all external devices have been connected

properly.

 Check to ensure you have selected the correct AV

source.

 Ensure that the volume has not been set to the

minimum level.

 Ensure the mute setting is not active.

 The reception might be poor. Check if the antenna is

connected properly.

 The reception might be poor.

 Check if the antenna is connected properly.

The picture is too
bright or too dark.

The picture is not
sharp.

There is a
double/triple picture.

The picture is
pixellated.

52

 Check the settings for contrast and brightness.

 The reception might be poor.

 Check if the antenna is connected properly.

 Check the settings for sharpness and noise reduction in

the PICTURE menu.

 Check if the antenna is aligned properly.

 Waves might be reflected off buildings or mountains.

 There might be interference from cars, trains, power

lines, neon lights, etc.

 There might be interference between the antenna and

power cables. Position the cables further apart.

A

There are stripes on
the display or the
colours are faded.

 Is there interference from another device?

 Transmission antennae on radio stations, amateur

radios and portable phones can also cause interference.

 Operate the device as far as possible from the device

that might be causing the interference.

The buttons on the
device are not
working properly.

The remote control
does not work.

Disc

The disk will not play,
although  (PLAY) is
being pressed, or
stops again at once.

 The child lock might be on.

 Check if the batteries are fully charged and have been

inserted in the right direction.

 Ensure the sensor field is not exposed to strong light.

 Switch off the device at the power cable and then on

again.

 Check if the TV function is active by pressing the TV

button on the remote control.

 Has the disk been inserted with the written side to the

front?

 Check whether the disk is damaged by inserting another

disk. Wipe the disk carefully from the centre to the edge
with a soft, dry cloth, if it is dirty.

 DVD: Does the DVD have the correct regional code (4)?

 Condensation has formed; give the device one to two

hours to dry out.

Do You Need More Help?

If the suggestions in the previous section did not rectify your problem please contact
us. The following information would help us:

 What is the MD Number?

 What external devices are connected?

 What messages appear on the screen?

 When operating the device, at which step did the problem occur?

 If you have a PC connected to the device:

– How is your computer configured?
– What software were you using when the problem occurred?

 What steps have you already taken to try and rectify the problem?

 Please provide your customer number if you have one.

53

A

LCD TV pixel faults

Despite the most modern production
methods, the highly complex technology
involved in producing this type of device
means there may be individual or multiple
pixel drop-outs (dead pixels). This is rare,
however.

For active matrix TFTs with a resolution of
1366 x 768 pixels, which are each made up of
three sub-pixels (red, green, blue), there are a
total of approx. 3.2 Mio. control elements in
use. Occasionally one or more pixels can fail or
become incorrectly controlled because of this
very high number of transistors and the
associated extremely complex manufacturing processes used.

Description

1 sub-pixel

Bright sub-pixel

Separation

Dark sub-pixel

Separation

Total number of bright and dark sub-pixels

The table describes the maximum number of pixel failures allowed on the screen,
without a warranty claim arising. A warranty claim can be made in some cases if the
above number of defects in a category is exceeded.

Two adjacent
(horizontal/vertical)

Minimum distance between bright and dark
sub-pixels

Single

2 adjacent

Minimum distance between bright and dark
sub-pixels

Accepted
number

 1

 0

 5 mm

 8

 2

 5 mm

 10

54

A

Cleaning

You can increase the lifespan of your device as follows:

Caution!

Always unplug the unit and disconnect all cables before cleaning.

 To protect the TV from scratches, protective film has been applied to the high-

gloss finish. Remove the films after you have set up the TV set correctly.

 If the high-gloss finish becomes dirty, wipe off the dust first. Then wipe down

gently with a cleaning cloth. If you do not wipe off the dust first, or if you apply
too much pressure when wiping down the high-gloss finish, you could scratch the
high-gloss finish.

 Do not use solvents, corrosive or aerosol detergent to clean.

 Clean the screen with a soft, lint-free cloth.

 Ensure that no water droplets remain on the LED LCD TV. Water droplets may

result in permanent discolouration.

 Do not place the screen in strong sunlight or near ultraviolet light.

 Store the packaging material in a safe place; only use this box to transport the LED

LCD TV.

Caution!

None of the parts inside the housing require cleaning or maintenance.

55

A

Disposal

Packaging

Your device has been packaged to protect it from sustaining damage in
transit. The packaging is made of environmentally-friendly material which
can be recycled.

Device

At the end of its service life, the device should not be disposed of with the
household rubbish. Please enquire about the options for environmentally­friendly disposal.

Batteries

Do not dispose of used batteries in the household rubbish! They should be
taken to a collection point for used batteries.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced technician for help.

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Shielded
interface cables, if any, must be used in order to comply with the emission limits.

56

A

Technical Specifications

Description: P13102 (MD 21097)

Nominal voltage: 220-240V ~ 50 Hz

Screen size: 47 cm (18.5") TFT; 16:9-Display

Power consumption: max. 36 Watt

Power consumption on standby: < 0.5 W

Physical resolution: 1366 x 768

TV system: PAL, SECAM, B/G, D/K, K’, I/I, L/L’

Channels: VHF (Band I/III)
UHF (BAND U)
HYPERBAND
KABEL-TV (S1-S20) / (S21-S41)
DVB-T (free to air)

Audio: Stereo / Nicam

Program Storage Sorting: 199 (ATV) / 400 (DTV)

Antenna input: 75 Ohm

Connectivity: 1 x Antenna In (analogue/digital)
1 x USB In
1 x VGA In
1 x VGA Audio In
2 x HDMI In (with HDCP Decoding)
1 x Component In Adapter 3.5 mm (YPbPr/YUV)
1 x SCART-to-AV Adapter
1 x AV In
1 x RCA Audio In (AV/component shared audio)
1 x Headphones In
Drives USB, Disc

Formats supported: DVD+R/RW, DVD-R/RW, CD-R, CD-RW

Laser performance of the DVD player Laser Class 1

Pay attention to the

Please pay attention to the following:

There are many, partly non-standardized CD recording processes and copy
protection processes, and different CD-R and CD-RW blanks today. Input
errors or delays can arise in individual cases because of this. This is not a defect
in the device.

imprint, if you use audio CDs.

57

A

Permissible ambient temperature +5 °C - +35 °C

Permissible relative air moisture 20 % - 85 %

Dimensions (W x H x D, with stand): Approx. 456 x 339 x 160 mm

Dimensions (W x H x D, without stand):Approx. 456 x 312 x 52 mm

Weight with Stand: 3.9 Kg

Weight without Stand: 3.7 Kg

Remote Control

Transmission type: Infrared

LED classification: 1

Battery type: 2 x 1.5V AAA R03/LR03

Pleae note:

If, as a result of an unforeseeable combination of operating steps, faulty data
transfer or electrostatic discharge the LED LCD TV can no longer be operated,
always unplug the power cable from the mains and then reconnect and switch
on the device.

58

Instruction Manual

12/2011

MEDION Australia Pty Ltd

St. Leonards, NSW 2065

Australia

Hotline: [phone]

Opening hours: Mon - Fri 08:30AM to 06:00PM EST

Internet

www.medion.com.au

E-mail Support

[e-mail]

47 cm (18.5") LED LCD TV
with inbuilt DVD Player and HD DVB-T Tuner

MEDION