MDE MAX20.5-5.0CA, MAX20.5-5.0C, MAX20-90.0C, MAX20-75.0CA, MAX20-75.0C Datasheet

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

1-800-831-4881 Email: [e-mail] Web: www.mdesemiconductor.com

MAX™ 20 Cell Series

HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE

VOLTAGE - 5.0 to 150 Volts

20000 Watt Peak Pulse Power

FEATURES

• Glass passivated junction

• Bidirectional

• 20000W Peak Pulse Power
capability on 10/1000 µsec waveform

• Excellent clamping capability

• Repetition rate (duty cycle):0.05%

• Sharp breakdown voltage

• Low incremental surge resistance

• Fast response time: typically less
than 1.0 ps from 0 volts to BV

• Typical IR less than 20µA above 10V

• High temperature soldering performance.

MECHANICAL DAT

A

Terminals: Solderable per MIL-STD-750. Method 2026

Mounting Position: Any Cell

Weight: 1.49 ± 0.149g (0.053 ± 0.005 ounces)

DEVICES FOR BIPOLAR APPLICATIONS

Bidirectional use C or CA Suffix. Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTIC

S

Ratings at 25°C ambient temperature unless otherwise specified.

RATING SYMBOL

V

ALUE UNITS
Peak Pulse Power Dissipation on 10x1000 µsec
waveform

Peak Pulse Current of on 10-1000 µsec waveform

Minimum 20000Pppm Watts

Ippm SEE CURVE Amps

UNIT: Inch
(mm)

0.37 ± 0.04
(9.45 ± 0.95)

0.051 ± 0.005
(1.29 ± 0.13)

8/6/2002

MAXPak™ Series Curves

3.0

4.0

150

0

1.0 2.0

tr = 10µsec.

Peak Value
I

PPM

TJ = 25°C
Pulse Width(td)is defined
as the point where the
peak current decays to
50% of I

PPM

10/1000µsec.Waveform
as defined by R.E.A.

td

Fig.3 - Pulse Waveform

4.0

50

Half Value- I

PPM

2

100

I

PPM

- Peak Pulse Current,% I

RSM

3.0

0

t - Time(ms)

10/21/2002