MDE 3KP9.0A, 3KP9.0, 3KP8.5A, 3KP8.5, 3KP8.0A Datasheet

MDE Semiconductor, Inc.

V

V

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

3KP SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180 Volts

3000 Watt Peak Pulse Power

FEATURES

• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O

• Glass passivated junction

• 3000W Peak Pulse Power
capability on 10/1000 µs waveform

• Glass passivated junction

• Low incremental surge resistance

• Excellent clamping capability

• Repetition rate (duty cycle): 0.05%

• Fast response time: typically less than

1.0 ps from 0 volts to BV

• Typical IR less than 1µA above 10

• High temperature soldering guaranteed:
265°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension

MECHANICAL DATA

Case: Molded plastic over glass passivated junction
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.07 ounces, 2.1 grams

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP180 (e.g. 3KP5.0C, 3KP180CA)

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

RATING SYMBOL

Peak Pulse Power Dissipation on 10/1000 µs
waveform

Peak Pulse Current of on 10/1000 µs waveform
Steady State Power Dissipation at
Lead lengths .375", 9.5mm
Peak Forward Surge Current, 8.3ms Single Half Sine-wave

Superimposed on Rated Load,
Operatings and Storage Temperature Range Tj, Tstg -55 +175 °C
NOTES:

1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.

3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.

(NOTE 1, Fig.1)

(Note 1,Fig 3)

TL = 75°C

(Note 2)

(JEDEC Method)(Note 3)

Pppm

Ippm SEE TABLE 1 Amps

Pm(AV)

IFSM

ALUE UNITS

Minimum 3000 Watts

8.0

250 Amps

Watts

8/6/2002

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: [phone] • Fax: [phone]

RATING AND CHARACTERISTIC CURVES 3KP SERIES

8/6/2002