McIntosh LB100 Operation Guide

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: [phone] www.mcintoshlabs.com

LB100

McIntosh Light Box

McIntosh Laboratory, Inc.

2 Chambers Street
Binghamton, NY 13903
www.mcintoshlabs.com

The continuous improvement of its prod­ucts is the policy of McIntosh Laboratory
Incorporated who reserve the right to
improve design without notice.

Operation Guide

McIntosh Part No. 04187600

Integrated Amplifier or Preamplifier

Connection Diagram and Operation

Power On

Place the ON-OFF/REMOTE Power Control Switch in the ON
position or, if the PC IN Jack is connected to the Power Control/
Trigger Jack from a McIntosh Component, place the switch in
the OFF/REMOTE position.

Power Off

Place the ON-OFF/REMOTE Power Control Switch in the
OFF/REMOTE position or, if the PC IN Jack is connected to
the Power Control/Trigger Jack from a McIntosh Component,
switch power Off on the connected McIntosh Component.

PC IN (Power Control/Trigger) receives turn­on signals from a McIntosh component and PC
OUT (Power Control/Trigger) sends turn-on
signals on to another McIntosh Component

The AC/DC Power Adapter supplied
with the LB100 McIntosh Light Box

Connect to a live AC outlet (always On)
using the supplied AC Power Cord. Re­fer to information on the power supply
to determine the correct voltage

Connect to another McIntosh
Component Power Control or
Trigger Input Jack

Connect to the DC IN 5V
connector on the Rear Panel
of the LB100 McIntosh Light
Box

LB100 LIGHT BOX

Connect the supplied
AC/DC Power Adapter
DC Output Connnector

2