Maytag MFT2673BEB, MFT2673BEM, MFT2673BEW Dimension Guide
PRODUCT MODEL NUMBER
MFT2673BE
Electrical: A 115-volt, 60-Hz, AC-only, 15or 20-amp fused, grounded electrical supply
is required. It is recommended that a
separate circuit serving only your refrigerator
be provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator
to the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”
Water: A cold water supply with water
pressure between 35 and 120 psi (241 and
827 kPa) is required to operate ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
NOTE: If the water pressure is less than
what is required, the flow of water from the
water dispenser could decrease or ice cubes
could be hollow or irregular shaped.
Reverse Osmosis Water Supply:
IMPORTANT: The pressure of the water
supply coming out of a reverse osmosis
system going to the water inlet valve of the
refrigerator needs to be between 35 and
120 psi (241 and 827 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10558103A
1/31/14
IMPORTANT: This refrigerator is designed for indoor, household use only.
To ensure proper ventilation for your refrigerator, allow for a
1
⁄2" (1.25 cm) space on each
side and at the top. Allow a 1" (2.54 cm) space behind the refrigerator. If your refrigerator
has an ice maker, allow extra space at the back for the water line connections.
When installing your refrigerator next to a fixed wall, leave 3
3
⁄4" (9.5 cm) minimum space
between the refrigerator and wall to allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges
from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended
that you do not install the refrigerator near a heat source, such as an oven or radiator.
Bottom Mount Refrigerator
PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
H
G
cabinet
F
not incl.
handle
E
incl.
handle
B
top of
cabinet
Height -
Top of
Cabinet
“B”
685⁄8"
(174.3 cm)
Model Size
26.1 cu.ft.
Height -
Overall
“A”
7701⁄8"
(178.1 cm)
Depth -
Doors
Open 90°
“C”
48"
(121.9 cm)
A
overall
Depth Drawer
Open
“D”
475⁄8"
(121.0 cm)
Depth -
With
Handles
“E”
3511⁄16"
(90.6 cm)
Depth Without
Handles
“F”
333⁄16"
(84.3 cm)
Depth Cabinet
Only
“G”
2815⁄16"
(73.5 cm)
I
90˚90˚
Width Cabinet
“H”
3511⁄16"
(90.6 cm)
C
D
Width -
Door
Open 90°
“I”
433⁄16"
(109.7 cm)
¹⁄₂" (1.25 cm)
3³⁄₄" (9.5 cm)
Loading...