Maytag MAT15MNAGW0, MAT14CSBGW0 Installation Guide

COMMERCIAL WASHER iNSTALLATiON iNSTRUCTiONS
220-240-volt, 50-Hz Models
iNSTRUCTiONS D'INSTALLATION DU LAVE-LINGE COMMERCIAL
ModUles 220 - 240 V, 50 Hz
LAVADORA COMERCIAL INSTRUCCIONES DE INSTALACION
Modelos de 220 y 240 voltios, 50 Hz
LAVATRICE COMMERCIALE ISTRUZIONI D'INSTALLAZIONE
Modelli a 220-240 V, 50 Hz
W10135298B
www.maytagcommerciattaundry.com
TableofContents
WASHER SAFETY ........................................................................ 3
WASHER DISPOSAL .................................................................... 3
INSTALLATION REQUIREMENTS .............................................. 4
Tools and Parts .......................................................................... 4
Location Requirements .............................................................. 4
Drain System .............................................................................. 5
Electrical Requirements ............................................................ 6
Tabledesmati res
SECURITE DE LA LAVEUSE .................................................... 10
I_UMINATION DU LAVE=UNGE ................................................ 10
EXIGENCES D'INSTALLATION ................................................ 11
Outillage et pi_ces .................................................................... 11
Exigences d'emptacement ...................................................... 11
Syst_me de vidange ................................................................ 12
Specifications etectriques ........................................................ 12
SEGURIDAD DE LA LAVADORA .............................................. 17
ELIMINACK_)N DE LA LAVADORA ............................................ 17
REQUISITOS DE INSTALACldN .............................................. 17
Piezas y herramientas .............................................................. 17
Requisitos de ubicacidn .......................................................... 18
Sistema de desag_e ................................................................ 18
Requisitos electricos ................................................................ 19
INSTALLATION INSTRUCTIONS ............................................ 7
Remove Shipping Strap ............................................................ 7
Connect the Hoses .................................................................... 7
Level the Washer ...................................................................... 8
Complete Installation ................................................................ 8
WARRANTY .................................................................................. 9
INSTRUCTIONS D'INSTALLATION ........................................ 13
Enlever la sangle d'expedition ................................................ 13
Raccordement des tuyaux ...................................................... 13
Reglage de I'aptomb du lave-linge ........................................ 14
Achever I'instattation ................................................................ 15
GARANTIE .................................................................................... 16
Indite
INSTRUCCIONES DE INSTALACION .................................... 20
Cdmo quitar la correa de embNaje ........................................ 20
Conecte las mangueras .......................................................... 22
Nivetacidn de la lavadora ........................................................ 22
Complete la instalacidn .......................................................... 23
GARANTIA .................................................................................... 24
Sommario
SICUREZZA DELLA LAVATRICE ............................................ 25
L'EUMINAZIONE DELLA LAVATRlCE ...................................... 25
REQUISITI D'INSTALLAZIONE ................................................ 26
Attrezzi e componenti .............................................................. 26
Requisiti di posizionamento .................................................... 26
Sistema di scarico .................................................................. 27
Requisiti etettrici ........................................................................ 28
ISTRUZIONI D'INSTALLAZIONE ............................................ 29
Rimozione delle fascette d'imbaltaggio .................................. 29
Connessione dei tubi .............................................................. 29
Livellamento della tavatrice .................................................... 30
Instatlazione completa ............................................................ 31
GARANZIA .................................................................................. 32
WASHERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
WASHERDISPOSAL
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help avoid potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
3
INSTALLATIONREQUIREMENTS
Gather the required tools and parts before starting installation. Tools needed
[] Level [] Flat-btadescrewdriver [] Utitityknife [] Pliers
[] Scissors [] Bucket [] 20 cm (8") or 25 cm (10")
adjustable wrench
This washer may be installed in a recessed area or closet. The installation spacing is in inches and is the minimum
allowable. Additional spacing should be considered for ease of installation, servicing, and compliance with local codes and
ordinances. If closet door is installed, the minimum unobstructed air openings
in the top and bottom are required. Louvered doors with equivalent air openings are acceptable.
Parts supplied Remove parts bag from washer. Check that all parts were
included.
[] 1 Hose clamp [] 2 Front-leveling legs [] 2 Inlet hoses with nuts
[] 4 Flat water hose washers [] 1 Drain hose
[] Hose adapter
IMPORTANT: Do not install or store the washer where it will be exposed to the weather. Do not store or operate the washer in
temperatures at or below 0°C (32°F). Some water can remain in the washer and can cause damage in low temperatures.
Proper installation is your responsibility. You will need:
[] A water heater set to deliver 60°C (140°F) water to the washer. [] An earthed electrical outlet located within 1.2 m (4 ft) of where
the power cord is attached to the back of the washer.
See "Electrical Requirements."
[] Hot and cold water taps located within 1.2 m (4 ft) of the back
of the washer, and provide water pressure of 69-690 kPa (10- 100 psi). A pressure reduction valve should be used in the
supply line where inlet pressure entering the building exceeds 690 kPa (100 psi) to prevent damage to the washer
mixing valve.
[] A level floor with a maximum slope of 2.5 cm (1") under entire
washer.
[] A sturdy floor to support the washer weight (washer, water,
and load) of 143 kgs (315 Ibs).
j closet door
oo
43,2 cm
(17")
0c 4#
(0 II) (0 I')
Recessed front view Closet side view
310 cm2 '_
(48in;)*
Front view
155cm2
(24 in2)*
:_
155 cm_-1 _
-I_ I _ 2.5 cm (1")
closet
O door
7.6 cm (3")
10,2cm
(4") min,
mln,
7.6 cm (3")
*
i
*Opening is the minimum for a closet door.
Louvered doors with equivalent air openings are acceptable.
[] Additional spacing should be considered for the ease of
installation and servicing.
[] Additional clearances may be required for walt, door, and floor
mouldings.
[] Additional spacing of 2.5 cm (1") on all sides of the washer is
recommended to reduce noise transfer.
[] Companion spacing should also be considered.
Product Dimensions
Electric Shock Hazard
Electrically earth this appliance. Do not use an extension cord or an electrical portable
outlet device. Failure to follow these instructions can result in death,
fire, or electric shock.
[] A 220-240 volt, 50 Hz., AC only, 10-amp, fused electric
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
[] This washer is equipped with a power supply cord having
an earthing plug. The plug should be accessible for disconnection from the supply.
[] If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
A. 109 cm (43") I. Power supply cord B. 97 cm (38%") J. Drain hose connector C. 89 cm (35") K. Label D. 3.8 cm (11½") L. 68.5 cm (27") E. 70.5 cm (273/4'') M. 13.3 cm (51/4'') R 65cm(251½ '') N. 2.5cm(1")
G. Water inlets O. Water level switch and shaft H. 18 cm (7") R 12.7 cm (5")
Standpipe Drain System
The standpipe drain requires a minimum diameter standpipe of 5 cm (2"). The minimum carry-away capacity can be no less than
64 L (17 gal.) per minute. The top of the standpipe must be at least 99cm (39") high and
no higher than 183 cm (72") from the bottom of the washer.
Using the universal cord included with this washer: This washer is equipped with a universal cord with
interchangeable mains plugs.
1. Select the appropriate mains plug assembly from those supplied and attach it to the mains cord connector.
2. Snap the 2 halves of the cord lock together over the connector to retain it in position.
5
Recommended Earthing Method
EARTHING iNSTRUCTiONS
This washer must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an
equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is properly installed and earthed in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
earthing conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
INSTALLATIONINSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer. Failure to do so can result in back or other injury.
1.
Remove tape that covers the shipping strap. Pull to
completely remove the shipping strap with 2 cotter pins from the inside of the washer.
Save the shipping strap for later use.
Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow
these instructions.
1. The washer must be connected to the water taps using the
new inlet hoses supplied with the machine. Do not re-use
old hoses. Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.
A B
A. Coupling
B. Washer
A.Shippingtape B.Shippingstrap
2.
Pull firmly to remove the end of shipping strap from the back
of the washer. The shipping strap plug must be completely removed from the washer for the self-leveling legs to be
released.
A. Cold water inlet valve
B. Hot water inlet valve
2. Attach hose to bottom inlet valve opening first.
3. Attach second hose to top inlet. Tighten couplings by hand; then use pliers to make an additional
two-thirds turn.
NOTE: Inlet valve threads are plastic. Do not strip or cross-thread.
6. Check that hose is not twisted or kinked and is
securely
in place.
Put "hook" end of drain hose into standpipe.
Tightly wrap the shipping strap around the standpipe. Push plug into the nearest hole in the shipping strap.
Connect the inlet hoses to the water taps
1. Before attaching water inlet hoses to the water taps, run water through both taps into a bucket. This wilt get rid of
particles in water lines that might clog hoses. Mark which is
the hot water tap.
2. Install a black plastic tap adapter on each inlet hose.
3. Attach bottom hose (inlet marked "H') to hot water taps. Tighten coupling to taps by hand.
4. Attach top hose (inlet marked "C") to cold water taps. Tighten coupling to taps by hand.
5. Use pliers to make an additional two-thirds turn to each coupling.
5.
Measure and mark a point approximately 40.6 cm (16")
from the plug end of the shipping strap. Cut shipping strap at this point.
Install the front leveling feet
1.
Stack two corner posts on top of each other. Tilt washer
backward and insert corner posts 7.6 cm (3") in from one side
of washer as shown. Repeat with other corner posts on other side of washer.
2.
Use the leveling legs and nuts from parts package. Screw nut
down to within 1.3 cm (1/2")from base.
A. 1.3cm (V2") B.Base
C. Nut
3. Insert legs into correct holes at each front corner of washer
until nuts touch washer. Do not
tighten nuts until the washer
is leveled.
4. Tilt washer backward and remove corner posts. Gently
lower washer to floor.
5. Move washer to its permanent
location. Remove cardboard or hardboard from under washer.
/
7
Level the washer
1. Tilt washer forward raising back legs 2.5 cm (1" ) off of floor. To adjust rear self-leveling legs, gently lower washer to floor.
2. Check levelness of the washer by placing a carpenter's level
on top of the washer, first side to side; then front to back.
Checklist for washer operation: Check the following if the washer is not operating properly:
1. Power supply cord is plugged in.
2. Circuit breaker is not tripped or fuse is not blown.
3. Timer has been advanced to start of a cycle.
4. Water taps are turned on.
5. Inlet and drain hoses are not kinked.
6. Washer lid is closed.
7. Inlet valve can freeze if not protected from the weather.
8. Suds level. Excess suds will stow the spin and cause poor rinsing. Operate the washer through a complete cycle with no
detergent. Use less detergent or a controlled suds type detergent in future loads.
3. If washer is not level, adjust the front legs up or down. Make final check with level.
4. When washer is level, use a wrench to turn the nuts on front
legs up tightly against washer base. If nuts are not tight
against washer base, the washer may vibrate.
1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended earthing
method.
2. Check to be sure all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.
3. Turn on water taps and check for leaks. Tighten couplings
if there is leaking. Do not overtighten; this could cause
damage to the taps.
4. Check to be sure you have all of your tools.
5. Check that the shipping strap was removed from the back of the washer and used to secure the drain hose. If entire strap
is not removed, washer may vibrate and be noisy.
6. Plug power supply cord into an earthed outlet.
NOTE: On some models, during factory testing, the timer is advanced partially into the cycle causing the start button to be depressed. Allow timer to advance to the end of the cycle. When the cycle is complete, the timer will reset and the start button will return to the start position. If the timer is not allowed to advance to the end of the first cycle and reset, the wash load will not be completed.
If you need assistance: Contact your authorized Maytag Commercial Laundry distributor.
When you call, you will need the washer model number and serial number. Both numbers can be found on the serial-rating plate
located on your appliance. Or visit: www.MaytagCommercialLaundry.com.
Moving the washer to a new location
Remove the front legs from the base of the washer.
Place both rear leveling legs in the upper position and tape securely.
Apply tape to the side and bottom of the cabinet near the rear.
Open washer lid, wedge a blanket between the tub ring and the cabinet top restricting the tub movement.
Frontlegs
Rearlegs Take2 sides.
MAYTAG COMMERCIAL WASHER, DRYEK STACKED DRYE
DRYEK COMMERCIAL STACK LAUNDRY, AND MULTI-LOAD
COiN OPERATED COMMERCIAL WASHERS AND DRYERS
WAR NTY
LiMiTED WARRANTY ON PARTS
For the first five years from the date of purchase, when this commercial appliance is installed, maintained and operated according to the instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation (thereafter "Maytag") will pay for factory
specified parts or original equipment manufacturer parts to correct defects in materials or workmanship. Proof of original purchase date
is required to obtain service under this warranty.
iTEMS MAYTAG WiLL NOT PAY FOR
1. All other costs including labor, transportation, or custom duties.
2. Service calls to correct the installation of your commercial appliance, to instruct you how to use your commercial appliance, to replace or repair fuses, or to correct external wiring or plumbing.
3. Repairs when your commercial appliance is used for other than normal, commercial use.
4. Damage resulting from improper handling of product during delivery, theft, accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with local electrical or plumbing codes, or use of products not approved by Maytag.
5. Pickup and Delivery. This commercial appliance is designed to be repaired on location.
6. Repairs to parts or systems resulting from unauthorized modifications made to the commercial appliance.
7. The removal and reinstallation of your commercial appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.
8. Chemical damage is excluded from all warranty coverage.
9. Changes to the building, room, or location needed in order to make the commercial appliance operate correctly.
DiSCLAiMER OF iMPLiED WARRANTIES; LiMiTATiONS OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THiS LiMiTED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. iMPLiED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABiLiTY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LiMiTATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LiMITATiONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Ifyou need service, please contact your authorized Maytag Commercial Laundry distributor. To locate your authorized Maytag
Commercial Laundry distributor, or for web inquiries, visit www.MaytagCommercialLaundry.com.
9/07
For written correspondence:
Maytag Commercial Laundry Service Department
2000 M-63 North
Benton Harbor, Michigan 49085 USA
9
SECURITEDULAVE-LINGE
Votre securit6 et ceJJe des autres est tres importanteo
Nous donnons de nombreux messages de securit6 importants dans ce manuel et sur votre appareil menager. Assurez-vous de toujours tire tousles messages de securit6 et de vous y conformer.
Voici le symbole d'alerte de securit6. Ce symbole d'alerte de securit6 vous signale les dangers potentiels de dec6s et de blessures graves a vous et
d'autres. Tous les messages de securit6 suivront le symbole d'alerte de securit6 et le mot "DANGER" ou
"AVERTISSEMENT'. Ces mots signifient :
Risque possible de deces ou de blessure grave si vous ne suJvez pas Jmm_diatement Jes instructions.
Risque possible de deces ou de blessure grave si vous ne suJvez pas Jes instructions.
Tousles messages de securit6 vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et ce qui peut se produire en cas de non-respect des instructions.
ELIMINATIONDULAVE-LINGE
Le marquage de I'appareil est conforme b.la directive europeenne 2002/96/EC sur les equipements electroniques et
61ectriques, pour gestion des d6chets.
En veillant b.1'61imination correcte de ce produit, vous 6viterez d'6ventuelles cons6quences n6fastes pour I'environnement et la
sant6 humaine qui peuvent _tre associ6es au traitement inappropri6 de ce produit Iorsqu'il a 6t6 mis au rebut.
Le symbole figurant sur le produit ou darts les documents qui accompagnent le produit indique que cet appareil ne dolt pas @re
trait6 comme d6chet m6nager; on dolt plut6t le remettre & un centre de collecte sp6cialis6 pour le recyclage des 6quipements 61ectriques et 61ectroniques.
L'61imination de ce produit apres mise au rebut dolt _tre effectu6e conform6ment aux prescriptions de la r6glementation locale
de protection de I'environnement.
Pour I'information d6taill6e concernant le traitement, le recyclage et la r6cup6ration de ce produit, contacter la municipalit6 locale, le service d'61imination des d6chets m6nagers, ou le commer(2ant qui a vendu le produit.
10
Loading...
+ 22 hidden pages