Maxtor ONETOUCH III USB 2.0 Installation guide

Quick Start Guide

MAXTOR ONETOUCH III USB 2.0

Windows 2000 and Windows XP Installation

Installation Software

™

Maxtor OneTouch

III

Logiciel d’installation, Installationssoftware,
Software di installazione, Installationsprogram,
Software de instalación, Installatiesoftware,
Asennusohjelma, Software de Instalação,

Includes:

– Maxtor Backup
Software (Win)
– Maxtor OneTouch Drivers
– Maxtor OneTouch Manager
– Maxtor OneTouch User
Guide (English)

WINDOWS

English
Français
Deutsch
Español
Italiano

© 2005 Maxtor Corporation and its Licensors. Maxtor and the stylized
Maxtor logo are registered trademarks, and Maxtor OneTouch is
a trademark, of Maxtor Corporation. U.S. patents 5,150,473 and
5,966,730. Other patents pending. Other trademarks are the
property of their respective holders. All rights reserved.
10/05 PN: 20309300

Step 1. Install the OneTouch Software

You must have Administrative Privileges.
Refer to chapter 3 of the User’s Guide for
more information.

1. Insert the Install CD.

2. Wait for the Maxtor screen to appear.

3. Follow the on-screen instructions to install
the software. Refer to chapter 2 of the
User’s Guide for more information.

4. After completing installation, eject the CD.
Do not remove the CD until all steps of the
installation are complete.

Step 2. Connect the OneTouch III

1. Plug in the power adapter.

2. Turn the power switch on.

3. Connect a USB 2.0 cable from the OneTouch III
to the corresponding port on your computer.
Refer to chapter 2 of the User’s Guide for
more information.

Allow up to 2 minutes for your computer to
recognize the Maxtor OneTouch III.