Maxtor ONETOUCH III TURBO DATASHEET
Quick Start Guide
MAXT
OR ONETOUCH III TURBO EDITION
Macintosh OS X Installation
Includes:
– EMC
®
Retrospect®
Express HD (Win)
– EMC
®
Retrospect®
Express (Mac)
– Maxtor OneTouch Drivers
– Maxtor OneTouch Manager
– Maxtor OneTouch
User Guide (English)
©
2005 Maxtor Corporation and its Licensors. Maxtor and the stylized
Maxtor logo are registered trademarks, and Maxtor OneTouch is
a trademark, of Maxtor Corporation. EMC and Retrospect are
r
egistered trademarks of EMC Corporation. U.S. patents
5
,150,473 and 5,966,730. Other patents pending. Other
t
rademarks are the property of their respective
holders. All rights reserved.10/05 PN: 20310900
W
INDOWS
English
Français
Deutsch
Español
I
taliano
MACINTOSH
English
Français
Deutsch
Installation Software
Maxtor OneTouch
™
III
Logiciel d’installation, Installationssoftware,
S
oftware di installazione, Installationsprogram,
S
oftware de instalación, Installatiesoftware,
A
sennusohjelma, Software de Instalação,
Step 1. Install the OneTouch Software
To install the Maxtor OneTouch III software and
®
EMC
Retrospect®Express:
1. Insert and open the Install CD.
2. If you are installing the Maxtor OneTouch III
software to Mac OS X Panther or Jaguar:
Double-click on
((66..00..119955)
)
FFoorr 1100..33 aanndd EEaarrlliieer
r
If you are installing the Maxtor OneTouch III
software to Mac OS X Tiger:
Double-click on
FFoorr 1100..44 ((66..00..221122)
)
3. Open the folder for your language.
4. Double-click the Install Retrospect Express
icon. If prompted, enter your Username and
Password to authenticate.
5. Select the Easy Install option and follow the
on-screen directions to complete the software
installation. Refer to the User’s Guide for
more information.
6. After completing the installation, eject the
CD by dragging it to the trash.
Step 2. Connect the OneTouch III*
1. Plug in the power adapter.
2. Turn the power switch on.
3. Connect either a FireWire 800, FireWire 400
or USB 2.0 cable** from the OneTouch to the
corresponding port on your computer. Refer
to the User’s Guide for more information.
y one interface port (FireWire 800, FireWire 400, or USB)
*Onl
can be used to connect the OneTouch III to your computer.
**FireWire 400 and USB 2.0 cables are not included with this
kit but can be purchased from your local computer store.
OneTouch Button
Step 3. Set up the OneTouch Feature
1. Push the button on the front of your drive.
The Retrospect Express registration screen
will appear.
2. Complete the registration form.
To register, you must be connected to
the internet.
3. After you complete the registration, the
Maxtor OneTouch Setup Wizard is displayed.
Follow the on-screen instructions to setup
your backup.
Your installation is complete!
You may now back up your computer:
– Perform a backup at any time by pressing the
OneTouch button, or
– Allow Retrospect Express to automatically run
at the ne
Ref
– OneTouch Manager
– Restoring Your Files
xt scheduled backup time.
o the User’s Guide for more information on:
er t
– RAID Setup
Loading...