Marmitek HDTV Anywhere User guide

HDTV Anywhere

™

USER MANUAL 3

20672/ 20140710 • HDTV Anywhere
ALL RIGHTS RESERVED MARMITEK ©

™

2 © MARMITEK

SAFETY WARNINGS

x To prevent short circuits, this product should only be used inside and

only in dry spaces. Do not expose the components to rain or moisture.
Do not use the product close to a bath, swimming pool etc.

x Do not expose the components of your systems to extremely high

temperatures or bright light sources.

x In case of improper usage or if you have altered and repaired the

product yourself, all guarantees expire. Marmitek does not accept
responsibility in the case of improper usage of the product or when the
product is used for purposes other than specified. Marmitek does not
accept responsibility for additional damage other than covered by the
legal product responsibility.

x This product is not a toy. Keep out of reach of children.
x Do not open the product: the device may contain live parts. The product

should only be repaired or serviced by a qualified expert.

x Only connect the adapter to the mains after checking whether the

mains voltage is the same as the values on the identification tags.
Never connect an adapter or power cord when it is damaged. In that
case, contact your supplier.

ENGLISH

1. INTRODUCTION

Congratulations on your purchase of the HDTV Anywhere™! Use your
existing power network to watch HDTV elsewhere in your home. It allows
you, for example, to watch TV or a film in your bedroom, study or another
room, without laying any cabling. You can connect up to 2 HD devices and
transmit the HD signal wirelessly to a second HDTV or HD projector in
another room, and also continue to operate them remotely. It allows you to
connect a TV or projector to both the HDTV transmitter and the HDTV
receiver, enabling you to watch the same content in two different rooms.

Marmitek products are manufactured with the utmost precision and are of
high quality. Please read this user manual first and follow the instructions so
you can make the most of this product's capabilities.

HDTV Anywhere™ 3

2. PACKAGE CONTENTS

1x HDTV transmitter 2x AAA batteries
1x HDTV receiver 1x IR receiver cable
1x remote 1x IR blaster cable with 1 LED
2x HDMI cables 2x plugs + screws
2x power cables 1x user manual

3. PRODUCT CHARACTERISTICS

x The best solution for positioning your TV anywhere in your home!
x Watch TV programmes, films and photos from your HDMI device

elsewhere in your home, right on your TV/projection screen, in Full HD
quality.

x Connect up to two HDMI sources and transmit the signal wirelessly.
x Any available extra functions such as Video on Demand, Pay TV,

Electronic Program Guide, Time Shift and Digital Video Recorder
(DVR) remain remotely available and controllable.

x Plug & Play! Uses your existing power network and eliminates the need

to lay cables.

x Unique SmartLink technology ensures coverage throughout your home.
x Operate your connected A/V equipment remotely, using the infrared

return feature.

x The HDMI splitter built into the transmitter allows you to continue to

watch any connected equipment locally as well.

x 100% HDCP compliant.

4. INSTALLATION

4.1 Preparations

x Deactivate all devices prior to the installation.
x Preferably use grounded outlets to connect the HDTV transmitter and

receiver. If either of the two is connected to a non-grounded outlet, a
standard connection will be created without SmartLink technology.

x If possible, connect the HDTV transmitter and receiver directly to a wall

outlet and avoid using a power strip and extension cord, since these
may seriously weaken the signal.

4 © MARMITEK

4.2 Connecting the HDTV transmitter

The HDTV transmitter uses the power network to send the HD signal
wirelessly to the HDTV receiver in another room. This requires you to place
the HDTV transmitter close to your HD devices (e.g. a digital TV decoder,
Blu-ray player, Media Center PC or hard disk recorder).

RESET

IR OUT

Blu-Ray Player

Digital TV Decoder

HDMI OUTHDMI IN 2HDMI IN 1 SERVICE

100 ~ 240 VAC

HDTV

1. Connect up to 2 HD devices to the HDTV transmitter [1] using an HDMI
cable at HDMI IN.

2. Optionally: Connect an HDTV to the HDTV transmitter [2] at HDMI OUT
to continue to watch TV in this room as well.

3. Connect the supplied power cable to the HDTV transmitter [3] and plug

ENGLISH

it into the socket.

4.3 Connecting the HDTV receiver

Place the HDTV receiver in the room (bedroom, study or other room) where
you want to connect the second HDTV or HD projector.

RESET

IR IN

HDTV

HDMI OUT SERVICE

100 ~ 240 VAC

OR

HD Projector

1. Connect your HDTV or HD projector to the HDTV receiver [1] using an
HDMI cable at HDMI OUT.

2. Connect the supplied power cable to the HDTV receiver [2] and plug it
into the socket.

HDTV Anywhere™ 5