Marmitek Glow XSE User guide [ml]

Glow XSE
Smart Wi-Fi LED bulb
GU10 | MR16 | 380 lumen | 4.5 W = 35 W
Warm to cool white
Package content
1 x Glow XSE bulb 1 x Quick install guide
Marmitek Smart me app Multi language user guide
Safety Instructions
Please read these instructions thoroughly before you use the device and keep them for future reference. Only for indoor use.
Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Never open the product: the device may contain parts with deadly voltage.
Repairs or service should only be performed by qualified personnel.
Using damaged or inappropriate lights or fittings carries the risk of electric shocks.
Before installation, turn off the mains power and let lamps cool down before replacement.
Requirements
This light bulb is not suitable for use with conventional dimmers. This product requires a stable working Wi-Fi network (username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from the Apple app store or the Google Play store. Launch the Smart me app after installation is completed. Follow the instructions and register for a new account.
Installation of the Glow XSE
Ensure the mains power to the lamp fixture is switched OFF by using your conventional light switch.
Install the Smart Glow XSE light bulb into fixture and switch the light back ON.
The light bulb should start flashing quickly (2 times per second).
Launch the Smart me app from your smart phone or tablet.
Click on the + (upper right corner) to add a new device, confirm if the light bulb flashes quickly and follow the instructions.
Press Help button during installation for more information or when installation fails.
Notes for using the product
After the installation is completed you can control and configure the light bulb using the app.
When the light bulb is switched of by the conventional light switch, it cannot be operated anymore by app, timers or preprogramed smart scenarios.
Check our website www.marmitek.com for more details and how to use the Smart me products.
Technical specifications
Lamp type Spotlight Base type GU10 Light color White adjustable (CCT) Color temperature 2700-6500K Wattage 4.5 W Wattage 4.5 kWh/1000h Equal to 35 Watt Light output 380 lumen Beam angle 120 degrees Life time hours/clicks 25.000/15.000 Wireless technology Wi-Fi 2.4GHz Power 220-240 VAC 50/60 Hz Standby power < 0.5 Watt Dimensions 50x70mm
Declaration of Conformity
Hereby, Marmitek BV, declares that the Glow XSE is in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available on our website at www.marmitek.com
Veiligheidsinstructies
Lees deze instructies zorgvuldig door voordat u het apparaat in gebruik neemt en bewaar ze voor toekomstig gebruik.
Alleen voor gebruik binnenshuis.
Stel het product niet bloot aan extreem hoge of lage
temperaturen, sterke lichtbronnen of direct zonlicht.
Dit product is geen speelgoed. Buiten het bereik van kinderen bewaren.
Open het product nooit: het apparaat kan onderdelen bevatten met dodelijke spanning.
Reparaties of onderhoud mogen alleen worden uitgevoerd door gekwalificeerd personeel.
Het gebruik van beschadigde of ongeschikte lampen of armaturen brengt het risico van elektrische schokken met zich mee.
Schakel voor de installatie de netspanning uit en laat de lampen afkoelen voordat u ze vervangt.
Eisen
Deze lamp is niet geschikt voor gebruik met conventionele dimmers.
Dit product vereist een stabiel werkend wifi netwerk (gebruikersnaam/wachtwoord) verbonden met het internet.
Installatie van de Smart me app
Download en installeer de Marmitek Smart me app in de Apple app store of de Google Play store.
Start de Smart me app nadat de installatie is voltooid.
Volg de instructies en registreer je voor een nieuw
account.
Installatie van de Glow XSE
Zorg ervoor dat de netspanning van de lamparmatuur is uitgeschakeld met behulp van uw conventionele lichtschakelaar.
Installeer de Smart Glow lamp in het armatuur en schakel de lamp weer in.
De gloeilamp moet snel beginnen te knipperen (2 keer per seconde).
Start de Smart me app vanaf uw smartphone of tablet.
Klik op de + (rechterbovenhoek) om een nieuw apparaat toe te voegen, bevestig of de lamp snel knippert en volg de instructies.
Druk tijdens de installatie op de Help-knop voor meer informatie of wanneer de installatie mislukt.
Opmerkingen voor het gebruik van het product
Nadat de installatie is voltooid, kunt u de gloeilamp bedienen en configureren met behulp van de app.
Wanneer de gloeilamp wordt uitgeschakeld door de conventionele lichtschakelaar, kan deze niet meer worden bediend met behulp van een app, timers of voorgeprogrammeerde slimme scenario's.
Kijk op onze website www.marmitek.com voor meer informatie en hoe u de Smart me producten kunt gebruiken.
Technische specificaties
Lamp type Spotlight Basistype GU10 Licht kleur Wit verstelbaar (CCT) Kleurtemperatuur 2700-6500K Wattage 4.5 W Wattage 4,5 kWh/1000u Gelijk aan 35 Watt Licht sterkte 380 lumen Stralingshoek 120 graden Levensduur uren/klikken 25.000/15.000 Draadloze technologie Wifi 2.4GHz Voeding 220-240 VAC 50/60 Hz Standby verbruik < 0,5 Watt Afmetingen 50x70mm
Verklaring van overeenstemming
Marmitek BV verklaart hierbij dat de Glow XSE voldoet
aan de essentiële eisen van de 2014/53/EU richtlijnen. De volledige conformiteitsverklaring is beschikbaar op
www.marmitek.com/en/declarations-of-conformity/
Meer gedetailleerde gebruikershandleiding en instructies zijn beschikbaar op onze website op
www.marmitek.com
Sicherheitshinweise
Bitte lesen Sie diese Anleitung sorgfältig durch bevor der Benutzung des Geräts und behalten diese zum späteren Gebrauch.
Nur für den Innenbereich geeignet.
Setzen Sie das Produkt keinen extrem hohen oder
niedrigen Temperaturen, starken Lichtquellen oder direktem Sonnenlicht aus.
Dieses Produkt ist kein Spielzeug. Außerhalb der Reichweite von Kindern halten.
Öffnen Sie das Produkt niemals: Das Gerät kann Teile mit tödlicher Spannung enthalten.
Reparaturen oder Wartungen dürfen nur von qualifiziertem Personal durchgeführt werden.
Die Verwendung von beschädigten oder ungeeigneten Lampen oder Leuchten birgt die Gefahr eines Stromschlags.
Schalten Sie vor der Installation die Netzspannung aus und lassen Sie die Lampen abkühlen, bevor Austauschung.
Anforderungen
Diese Lampe ist nicht für den Einsatz mit konventionellen Dimmern geeignet.
Dieses Produkt erfordert ein stabil funktionierendes Wi-Fi-Netzwerk (Benutzername/Passwort), das mit dem Internet verbunden ist.
Installation der Smart me App
Laden Sie die Marmitek Smart me App herunter und installieren Sie sie von der Apple App Store oder Google Play Store.
Wenn die Installation abgeschlossen ist, starten Sie die Smart me App.
Folgen Sie den Hinweise und registrieren Sie sich für ein neues Konto.
Installation des Glow XSE
Stellen Sie sicher, dass die Netzspannung der Leuchte mit Ihrem konventionellen Lichtschalter ausgeschaltet ist.
Installieren Sie die Smart Glow Lampe in der Halterung und schalten Sie sie wieder ein mit der Lichtschalter
Die Glühlampe sollte schnell blinken (zweimal pro Sekunde).
Starten Sie die Smart me App auf Ihrem Smartphone oder Tablett.
Klicken Sie auf das + (obere Ecke rechts), um ein neues Gerät hinzuzufügen, bestätigen Sie, dass die Lampe schnell blinkt und folge den Anweisungen.
Klicken Sie während der Installation auf die Schaltfläche Hilfe, um weitere Informationen zu erhalten oder wenn die Installation nicht erfolgreich ist.
Hinweise zur Verwendung des Produkts
Nach Beendigung der Installation können Sie die Lampe über die App bedienen und konfigurieren.
Wird die Glühlampe durch den herkömmlichen Lichtschalter ausgeschaltet, kann diese nicht mehr mit einer App, Timern oder vorprogrammierten Smart­Szenarien betrieben werden.
Besuchen Sie unsere Website www.marmitek.com für weitere Informationen und die Verwendung der Smart me Produkte.
Technische Daten
Lampentyp Spotlight Sockeltyp GU10 Lichtfarbe Weiß einstellbar (CCT) Farbtemperatur 2700-6500K Leistungsaufnahme 4.5 W Leistungsaufnahme 4,5 kWh/1000h/h Entspricht 35 Watt Lichtstärke 380 Lumen Abstrahlwinkel 120 Grad Lebensdauer Stunden/Klicks 25.000/15.000 Wireless-Technologie Wi-Fi 2,4GHz Stromversorgung 220-240 VAC 50/60 Hz Standby-Verbrauch < 0,5 Watt Abmessungen 50x70mm
Konformitätserklärung
Marmitek BV erklärt hiermit, dass die Glow XSE die grundlegenden Anforderungen der Richtlinien 2014/53/EU erfüllt. Die
vollständige Konformitätserklärung ist verfügbar unter www.marmitek.com/en/declarations-of­conformity/ Detailliertere Bedienungsanleitungen und Anweisungen finden Sie auf unserer Website unter
www.marmitek.com
Consignes de sécurité
Veuillez lire attentivement ces instructions avant d'utiliser l'appareil et conservez-les pour référence ultérieure.
Uniquement réservé à un usage en intérieur.
N'exposez pas l'appareil à des températures
extrêmement élevées ou très basses, à des sources lumineuses intenses ou à la lumière directe du soleil.
Ce produit n'est pas un jouet. Tenir hors de portée des enfants.
Ne jamais ouvrir le produit : l'appareil peut contenir des pièces avec une tension mortelle.
Les réparations ou l'entretien ne doivent être effectués que par du personnel qualifié.
L'utilisation de lampes ou de luminaires endommagés ou inadaptés comporte un risque de choc électrique.
Avant l'installation, couper la tension secteur et laisser refroidir les lampes avant de les remplacer.
Exigences
Cette lampe ne convient pas aux gradateurs conventionnels.
Ce produit nécessite une connexion internet (Utilisateur/ mot de passe) stable.
Installation de l'application Smart me
Téléchargez et installez l'application Marmitek Smart sur l'Apple store ou sur le Google Play store.
Une fois l'installation terminée, lancez l'application Smart me.
Suivez les instructions et créez un nouveau compte.
Installer le Glow XSE
Veillez à ce que l'alimentation électrique de la lampe soit coupée à l'aide de l'interrupteur d'éclairage conventionnel.
Installez la lampe Smart Glow dans l'appareil et rallumez-la.
La lampe à incandescence devrait commencer à clignoter rapidement (deux fois par seconde).
Démarrez l'application Smart me à partir de votre smartphone ou tablette.
Cliquez sur le + (coin supérieur droit) pour ajouter un nouvel appareil, confirmez que la lampe clignote rapidement et suivez les instructions.
Pendant l'installation, appuyez sur le bouton Aide pour plus d'informations ou si l'installation échoue.
Remarques sur l'utilisation du produit
Une fois l'installation terminée, vous pouvez utiliser et configurer l'ampoule à l'aide de l'application.
Lorsque la lampe à incandescence est éteinte par l'interrupteur conventionnel, elle ne peut plus être utilisée à l'aide d'une application, de minuteries ou de scénarios intelligents préprogrammés.
Visitez notre site Web www.marmitek.com pour plus d'informations et pour savoir comment utiliser les produits Smart me.
Caractéristiques techniques
Type de lampe Pleins feux Type de base E27 GU10 Couleur de la lumière Blanc réglable (CCT) Température de couleur 2700-6500K Puissance 4.5 W Puissance 4,5 kWh/1000h Egal à 35 Watt Résistance à la lumière 380 lumen Angle de rayonnement 120 degrés Durée de vie heures/clics 25.000/15.000 Technologie sans fil Wi-Fi 2.4GHz Alimentation 220-240 VAC 50/60 Hz Consommation en veille < 0,5 Watt Dimensions 50x70mm
Déclaration de conformité
Marmitek BV déclare par la présente que le Glow XSE est conforme aux exigences
essentielles des directives 2014/53/EU. La déclaration de conformité complète est disponible sur www.marmitek.com/en/declarations-of-conformity/
Un manuel d'utilisation plus détaillé et des instructions sont disponibles sur notre site Web à l'adresse
www.marmitek.com
Indicaciones de seguridad
Por favor, lea atentamente estas instrucciones antes de utilizar el dispositivo y guárdelas para futuras consultas.
Sólo para uso en interiores.
No exponga el producto a temperaturas
extremadamente altas o bajas, a fuentes de luz fuertes o a la luz solar directa.
Este producto no es un juguete. Mantenga este medicamento fuera del alcance de los niños.
No abrir nunca el producto: el aparato puede contener piezas con tensión mortal.
Las reparaciones o el mantenimiento sólo deben ser realizados por personal cualificado.
El uso de lámparas o luminarias dañadas o inadecuadas conlleva un riesgo de descarga eléctrica.
Antes de la instalación, desconecte la tensión de red y deje que las lámparas se enfríen antes de sustituirlas.
Requisitos
Esta lámpara no es adecuada para su uso con reguladores convencionales.
Este producto requiere una red Wi-Fi estable (nombre de usuario/contraseña) conectada a Internet.
Instalación de la aplicación Smart me
Descarga e instala la aplicación Marmitek Smart me de la tienda de aplicaciones de Apple o de Google Play.
Una vez finalizada la instalación, ejecute la aplicación Smart me.
Siga las instrucciones y regístrese para obtener una nueva cuenta.
Instalación del Glow XSE
Asegúrese de que la alimentación eléctrica del portalámparas esté desconectada con su interruptor de luz convencional.
Instale la lámpara Smart Glow en el aparato y vuelva a encenderlo.
La lámpara incandescente debe empezar a parpadear rápidamente (dos veces por segundo).
Inicie la aplicación Smart me desde su smartphone o tablet.
Haga clic en el signo + (esquina superior derecha) para añadir un nuevo dispositivo, confirme que la lámpara parpadea rápidamente y siga las instrucciones.
Durante la instalación, pulse el botón Ayuda para obtener más información o si la instalación falla.
Notas sobre el uso del producto
Una vez finalizada la instalación, puede operar y configurar la bombilla con la aplicación.
Cuando la lámpara incandescente se apaga con el interruptor de luz convencional, ya no puede funcionar con una aplicación, temporizadores o escenarios inteligentes preprogramados.
Visite nuestro sitio web www.marmitek.com para obtener más información y saber cómo utilizar los productos Smart me.
Especificaciones Técnicas
Lámpara tipo Foco de atención Tipo de base GU10 Color de luz Blanco ajustable (CCT) Temperatura de color 2700-6500K Potencia 4.5 W Potencia 4,5 kWh/1000h Igual a 35 vatios Resistencia a la luz 380 lúmenes Ángulo de haz 120 grados Vida útil horas/clicks 25.000/15.000 Tecnología inalámbrica Wi-Fi 2.4GHz Alimentación 220-240 VAC 50/60 Hz Consumo en espera < 0,5 vatios Dimensiones 50x70mm
Declaración de conformidad
Marmitek BV declara que Glow XSE cumple con los requisitos esenciales de las directivas 2014/53/UE. La Declaración de Conformidad completa está disponible en
www.marmitek.com/en/declarations-of-conformity/
Un manual de usuario más detallado e instrucciones están disponibles en nuestro sitio web en
www.marmitek.com
Avvertenze di sicurezza
Leggere attentamente le presenti istruzioni prima di utilizzare l'apparecchio e conservarle per riferimenti futuri.
Solo per uso interno.
Non esporre il prodotto a temperature estremamente
elevate o basse, a forti fonti di luce o alla luce solare diretta.
Questo prodotto non è un giocattolo. Tenere fuori dalla portata dei bambini.
Non aprire mai il prodotto: l'apparecchio può contenere parti con tensione mortale.
Le riparazioni o la manutenzione devono essere eseguite solo da personale qualificato.
L'uso di lampade o apparecchi di illuminazione danneggiati o inadatti comporta il rischio di scosse elettriche.
Prima dell'installazione, disinserire la tensione di rete e lasciare raffreddare le lampade prima di sostituirle.
Requisiti
Questa lampada non è adatta per l'uso con i dimmer convenzionali.
Questo prodotto richiede una connessione internet Wi-Fi stabile (nome utente/password).
Installazione dell'applicazione Smart me
Scaricare e installare l'applicazione Marmitek Smart me dall'app store Apple o dall'app store Google Play.
Una volta completata l'installazione, lanciare l'applicazione Smart me.
Segui le istruzioni e registrati per ottenere un nuovo account.
Installare lo Glow XSE
Assicuratevi che l'alimentazione di rete dell'apparecchio di illuminazione sia spenta tramite l'interruttore della luce convenzionale.
Installare la lampada Smart Glow nell'apparecchio e riaccenderla.
La lampada ad incandescenza dovrebbe iniziare a lampeggiare rapidamente (due volte al secondo).
Avviare l'applicazione Smart me dallo smartphone o dal tablet.
Fare clic su + (in alto a destra) per aggiungere un nuovo dispositivo, confermare che la lampada lampeggia rapidamente e seguire le istruzioni.
Durante l'installazione, premere il pulsante Help per ulteriori informazioni o se l'installazione fallisce.
Note sull'utilizzo del prodotto
Una volta completata l'installazione, è possibile azionare e configurare la lampadina utilizzando l'applicazione.
Quando la lampada a incandescenza viene spenta dall'interruttore della luce convenzionale, non può più essere azionata tramite app, timer o scenari intelligenti pre-programmati.
Visita il nostro sito web www.marmitek.com per maggiori informazioni e come utilizzare i prodotti Smart me.
Specifiche tecniche
Tipo di lampada Faretto Tipo base GU10 Colore della luce Bianco regolabile (CCT) Temperatura colore 2700-6500K Potenza 4.5 W Potenza 4,5 kWh/1000h Pari a 35 Watt Resistenza alla luce 380 lumen Angolo del fascio di 120 gradi Durata della vita ore/cicli 25.000/15.000 Tecnologia wireless Wi-Fi 2.4GHz Alimentazione 220-240 VAC 50/60 Hz Consumo in standby < 0,5 Watt Dimensioni 50x70mm
Dichiarazione di conformità
Marmitek BV dichiara che la Glow XSE è conforme ai requisiti essenziali delle direttive 2014/53/UE. La dichiarazione di conformità completa è disponibile all'indirizzo
www.marmitek.com/en/declarations-of-conformity/
Un manuale utente più dettagliato e le istruzioni per l'uso sono disponibili sul nostro sito web all'indirizzo
www.marmitek.com
20713/20191121 | Glow XSE™
all rights reserved © MARMITEK
stay connected marmitek.com
Loading...