Marantz VC6001 User Manual

Model VC6001 User Guide
5 Disc Super Audio CD/ DVD Changer
CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
CONGRATULATIONS
FINE MARANTZ PRODUCT.
MARANTZ is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments.
We are sure you will be fully satisfi ed with the DVD player.
Thank you for your support.
Please read through these operating instructions so you will know how to operate your model properly. After you have fi nished reading the instructions, put them away in a safe place for future reference.
Copy protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a dis­torted picture from copy-protected DVD discs.
This product incorporates copyright protection technol­ogy that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be au­thorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless other­wise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of suffi­cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
Operating Environment
Operating environment temperature and humidity:
+5°C to +35°C (+41°F to +95°F); less than 85%RH (cooling vents not blocked)
Do not install in the following locations
÷
Location exposed to direct sunlight or strong artifi cial
light
÷
Location exposed to high humidity, or poorly ven ti lat ed
lo ca tion
NOTE:
Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION :
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVERSHIELD)
2
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifi ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specifi ed by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information!
• This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
• Apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
• When the switch is in the OFF position, the apparatus isn’t completely switched-off from the MAINS.
English
3
FCC NOTE (for U. S. A only):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason­able protection against harmful interference in a residential installation. This equipment generates, uses and can radi­ate radio frequency energy and, if not installed and used in accordance with the in structions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re­ceiver.
• Connect this equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifi cations may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.
- Do not place anything about 0.1 meter above the top panel.
- Make a space of about 0.1 meter around the unit.
- No objects fi lled with liquids, such as vases, shall be placed on the apparatus.
- When the switch is in the OFF position, the equipment is not completely switched off from MAINS.
- The equipment shall be installed near the power supply so that the power supply is easily accessible.
WARRANTY
For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valua­ble purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes of when corre­sponding with Marantz.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme á la norme NMB-003 du Canada.
This product satisfi es FCC regulations when shielded cables and connectors are used to connect the unit to other equip­ment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
CE marking (for Europe only)
This product is in conformity with the EMC directive and low-voltage directive.
WARNINGS
- Do not expose the equipment to rain or mois­ture.
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment through the ventilation holes.
- Do not handle the mains lead with wet hands.
- Do not cover the ventilation with any items such as ta ble cloths, news pa pers, curtains, etc.
- No naked fl ame sources, such as lighted can­dles, should be placed on the equipment.
- When disposing of used batteries, please comply with gov ern men tal regulations or en vi ­ron men tal public in struc tion’s rules that apply in your country or area.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your pur-
chase receipt or invoice is adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer’s statutory rights and does not affect those rights in any way.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for clean­ing.
• Wipe the cabinet with a soft cloth.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. This product and the ac cessories packed together are the applicable product to the WEEE directive except batteries. Please dispose of any materials in accordance with your local recycling regulations. When discarding the unit, comply with your lo cal rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations con cerning chemical wastes.
4
Table Of Contents
English
1 Before You Start
Fea tures....................................................................................... 6
What’s in the box......................................................................7
Putting the batteries in the remote control ........................7
Using the remote control .......................................................7
Discs compatible with this player.........................................8
DVD-Video regions...................................................................9
General information................................................................. 9
MP3 compatibility information.............................................9
WMA compatibility information............................................9
JPEG compatibility information.............................................9
DivX compatibility information............................................. 9
2 Connecting Up
Easy setup................................................................................10
Home theater video connections ....................................... 11
Home theater audio connections....................................... 12
3 Controls & Displays
Front panel............................................................................... 13
Remote control .......................................................................14
4 Getting Started
Playing discs ............................................................................ 15
Basic playback controls.........................................................16
Resuming playback from the last stopped point .............16
Navigating DVD disc menus ................................................. 17
Navigating Video CD PBC menus .......................................17
5 Playing Discs
Introduction.............................................................................18
Preview function......................................................................18
Fast Forward/Fast Reversed................................................. 20
Still Frame/Slow Play/Frame Advance Playback...............21
Using the page....................................................................... 22
Using the Repeat Play.......................................................... 22
Looping a section of a disc ................................................. 23
Using the Random (SHUFFLE) Play................................... 23
Switching Camera Angles..................................................... 24
Switching the Subtitle Language ....................................... 24
Switching the Audio Language ......................................... 25
Switching the audio channel............................................... 25
Switching Super Audio CD Playback layer....................... 25
Switching Super Audio CD Playback area........................ 25
Using the Zoom Function.................................................... 25
Play back Information........................................................... 26
Playing an MP3/DivX/JPEG/Windows Media™
Audio disc ...............................................................................29
Playing a JPEG image fi le (slide show) .............................. 30
Playing MP3/WMA music and JPEG pictures
simultaneously.........................................................................31
Playing a DivX disc................................................................ 32
Using the Setup Menu ......................................................... 33
6 DVD Setup Menu
Setting up the GENERAL SETUP page.............................. 35
Setting up the AUDIO SETUP page .................................. 38
Setting up the VIDEO SETUP page................................... 43
Setting up the PREFERENCE page.....................................48
7 Additional Information
Language Codes ....................................................................52
Handling discs........................................................................ 53
Storing discs........................................................................... 53
Discs to avoid .........................................................................53
Cleaning the pickup lens...................................................... 53
Problems with condensation............................................... 53
Hints on installation.............................................................. 54
Moving the player..................................................................54
Precautions on using the power cord ............................... 54
Tr oubleshooting..................................................................... 55
Specifi cations ......................................................................... 58
5
Before You Start1
Features
An HDCP-compatible HDMI*1 terminal is provided for fully digital transmission that ensures the very highest picture and digital sound quality.
This unit comes with a High-Defi nition Multimedia Interface (HDMI) jack; an extended DVI interface for next-generation televisions. This interface allows transfers of uncompressed digital video and digital audio (audio streams such as Dolby Digital and DTS as well as linear PCM) with a single connector. HDMI standard Ver. 1.1 compatibility means the unit can also transfer DVD-Audio multi-channel audio over HDMI.
End-to-end full-digital transfers with all digital processing allow the enjoyment of realistic video without any image degradation caused by AD/DA conversions. And the unit can up-convert 480p video signals to 720p, 1080i, and 1080p video output signals using the scaling function and the HDMI jack (see pages 11, 46).
High quality 12-bit/216 MHz Video D/A converter*
The unit uses a Video D/A converter that performs D/A conversion of all video signals in 12-bits and can perform 8x over­sampling to let you enjoy beautiful video possible with DVD. Furthermore, NSV technology suppresses noise during DA conversion.
DCDi *
DCDi (Directional Correction Deinterlacing) computes and tracks the angle of the screen edge to fi ll in the missing pixels on the TV screen. DCDi signifi cantly optimizes the image quality, especially during slow motion playback. This function is available only for progressive scan output.
2
3
Superlative audio performance with Super Audio CD, DVD-Audio, Dolby* Digital and DTS*
Logos:
The VC6001 delivers breathtaking sound quality with Super Audio CD, DVD-Audio, Dolby Digital and DTS discs.
DivX *
You can enjoy DivX® fi les which are recorded on DVD±R/RW or CD-R/RW.
Plays DivX5.2, DivX4, DivX3 and DivX VOD Video content (see pages 29, 32).
This player supports Quarter Pixel.
This player supports GMC.
5
software
6
MP3 and WMA*7 compatibility
This player is compatible with CD-R, CD­RW and CD-ROM discs that contain MP3 and WMA audio tracks (see pages 29, 31 ).
JPEG compatibility
This player is compatible with CD-R, CD­RW and CD-ROM discs that contain JPEG data (see pages 29, 30, 31).
*1 HDMI, the HDMI logo and High-Defi nition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
2
“NSV” is a registered trademark of Analog Device
*
Co. Ltd.
3
“DCDi” is a registered trademark of Fraoudja, a
*
division of Genesis Microchip, Inc.
4
Manufactured under license from Dolby
*
Laboratories. “Dolby” “Pro Logic” and the double-D symbol are trademarks of Dolby
Lab o ra to ries.
5
“DTS” and “DTS Digital Surround” are registered
*
trade marks of DTS, Inc.
6
“DivX”, and “DivX Ultra” Certifi ed, and associated
*
logos are trademarks of DivX, Inc. and are used under license.
7
Windows Media and the Windows logo are
*
trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
4
High quality 24-bit/192 kHz DAC
The high specifi cation 24-bit/192 kHz DAC delivers dynamic, smooth and expansive analog sound from CDs and DVDs.
6
1Before You Start
What’s in the box
Thank you for buying this MARANTZ product. Please confi rm that the following accessories are in the box when you open it.
• Remote control
• AAA/R03 dry cell batteries x2
• Audio/Video cable (yellow/red/white)
• System control cable
• Power cable
• User Guide (this manual)
• Warranty card
Putting the batteries in the remote control
1 Open the battery
compartment cover on
the back of the remote
control.
2 Insert two AAA/R03
batteries into the battery
compartment following
the indications (ª, ·)
inside the compartment.
Using the remote control
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the remote control and the remote sensor on the unit.
• Use within the operating range and angle, as shown.
5m (16 feet)
30
30
• Remote operation may become unreliable if strong sunlight or fl uorescent light is shining on the unit’s remote sensor.
• Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.
• Replace the batteries when you no tice a fall off in the operating range of the remote control.
Note
• When using this player independently, set the
REMOTE CONTROL switch on the rear panel to INT. (INTERNAL) (see page 10).
English
3 Close the cover.
Note
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of battery together. Although they may look similar, different batteries may have different voltages.
• Make sure that the plus and minus ends of each battery match the indications in the battery compartment.
• Remove batteries from equipment that isn’t going to be used for a month or more.
When disposing of used batteries, please comply with governmental regulations or environmental bylaws that apply in your country or area.
7
Before You Start1
Discs compatible with this player
Any disc that displays one of the following logos should play in this player. Other formats, including DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3/ DivX/WMA/JPEG fi les) and Photo CD will not play.
DVD-Video compatibility:
• Logos:
• Single-sided or double-sided discs
• Single layer or dual layer discs
• Dolby Digital, DTS, MPEG or Linear PCM digital audio
• MPEG-2 digital video
Discs are generally divided into one or more titles. Titles may be further subdivided into chapters.
DVD-Audio compatibility:
• Logos:
• Single sided discs
• Single layer or dual layer discs
• Linear or packed PCM digital audio
• Some discs may contain MPEG-2 video, and Dolby Digital, DTS or MPEG digital audio
Discs are generally divided into one or more groups. Groups may be further subdivided into tracks.
DVD-R compatibility:
This unit can play DVD-R discs. Please note the fol low ing points when using these discs:
• Logo:
• This unit can play DVD-R discs recorded as DVD­Video format.
DVD-RW compatibility:
This unit can play DVD-RW discs. Please note the fol low ing points when using these discs:
• Logo:
• This unit can play DVD-RW discs recorded as DVD-Video format, and DVD-VR format.
• DVD-RW discs that were recorded with copy­once only permission can be played.
Super Audio CD compatibility:
• Logo:
• Single layer, dual layer or Hybrid layer
• 12cm (5in.) or 8cm (3in.) discs
• Digital audio (DSD)
Super Audio CDs are divided into tracks.
Audio CD compatibility:
• Logos:
• 12cm (5in.) or 8cm (3in.) discs
• Linear PCM digital audio
• Audio CD, CD-R* and CD-RW* formats
CDs are divided into tracks.
*This unit can play CD-R and CD-RW discs recorded in Audio CD or Video CD format, or with MP3 audio fi les or Windows Media audio fi les or picture fi les or DivX fi les.
*Some copy-controlled CDs may not conform to offi cial CD standards. They are special discs and may not play on the VC6001.
*The VC6001 does not support the non-DVD side of a Dual Disc.
Video CD compatibility:
• Logo:
• 12cm (5in.) or 8cm (3in.) discs
• MPEG-1 digital audio
• MPEG-1 digital video
Video CDs are divided into tracks.
Super VCD compatibility:
• Logo:
• 12cm (5in.) or 8cm (3in.) discs
• MPEG-1 digital audio
• MPEG-2 digital video
Super VCDs are divided into tracks.
DVD+R/+RW compatibility:
• Logo:
• This unit can play DVD+R/+RW discs. Please note the followings points when using these discs.
8
1Before You Start
DVD-Video regions
All DVD-Video discs carry a region mark on the case somewhere that indicates
which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can fi nd on the rear panel. Discs from incompatible regions will not play in this player. Discs marked
ALL will play in any player.
General information
• This player can recognize in total about 650 fi les per folders and 300 folder per disc for MP3/ DivX/WMA.
• When writing MP3/WMA/JPEG/DivX fi les to CD­R/RW discs, always be sure to set the writing format to ISO 9660 Level 1.
• For MP3 and WMA fi les recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time.
MP3 compatibility information
• Files should be MPEG1 Audio Layer 3 format. The sampling rate is 8 kHz to 48 kHz, but it is depends on the bit rate. Incompatible fi les will not play.
• Audio encoded at 128 kbps should sound close to regular audio CD quality. Although this player will play 32 kbps to 320 kbps, but it is depends on the sampling rate.
• This player is compatible with ID3 ver.1.1 Tag. But the information display on the display on the Front panel and TV screen is only ID3 ver. 1.0 Tag.
• Maximum 30 characters can be displayed on the display on the Front panel and TV screen.
• This player cannot play DVD-R/RW discs with recorded MP3 music data.
• This player only plays tracks that are named containing the fi le extension “.mp3” or “.MP3”.
• This player is not compatible with multi-session discs. If you try and play a multi-session disc, only the fi rst session will be played.
WMA compatibility information
• The sampling rate is 44.1 kHz (bit rate: 64 kbps-192 kbps) and 48 kHz (bit rate: 128 kbps-192 kbps).
• This player only plays tracks that are named with the fi le extension “.wma” or “.WMA”.
• This player can not play the disc contents protected by Windows Media Digital Right Management (DRM).
JPEG compatibility information
• While this player is designed to be able to handle image data recorded in JPEG format, no assurances are given that the player will be able to display image data recorded in all JPEG formats.
• This player can not display progressive JPEG images.
• This player can not display HD JPEG images.
• Always be sure to specify a fi le extension of “.JPG” or “JPEG” for JPEG fi les. The fi le will not be able to be displayed if a fi le extension other than “.JPG” or “JPEG” is specifi ed or if no fi le extension is assigned to the fi le. (Note that this means that JPEG fi les created on a Macintosh will not be able to be displayed as is.)
• Depending on the fi le size and compression ratio, some JPEG pictures cannot be displayed correctly.
DivX compatibility information
• A fi le with an extension of “.avi” or “.divx” is called a DivX fi le.
• Maximum 30 characters can be displayed on the display on the Front panel and TV screen.
• Maximum 4 Gbyte of fi le size can be displayed.
• File should be MPEG1 Audio Layer 3 format and MPEG2 format.
Caution!
• DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
• If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)
• There may be times when it is impossible to replay a CD-R/RW disc because of the characteristics of the disc being used or because of dirt or scratches on the disc.
• Unfi nalized DVD-R/RW discs cannot be played.
• Unfi nalized CD-R/RW discs cannot be played.
• For more information on using DVD-R/RW and CD-R/RW discs, see “Handling discs” on page
53.
• Never try to replay anything other than a music CD (CDA format) or a CD-R/RW on which MP3 and/or JPEG fi les have been stored. Depending on the type of fi le, there may be times when doing so will result in problems or erroneous operation.
English
9
Connecting Up2
Easy setup
This easy setup is the minimum set of connections you need to start watching DVD-Video discs. Both sound and picture are fed directly to your TV using the sup plied audio/video cables. For other possible con nec tions, see pages 11 and 12 .
Connect to a
1
composite video input on your TV using the supplied Audio/Video cable.
VIDEO
S1
VIDEO OUT
CENTER
FRONT
L
R
MIXED 2CH
SUB W.
SURR.
AUDIO OUT
C
RCB
Ver1.1
COMPONENT
L
R
HDMI
Connect to a pair of stereo
2
audio inputs on your TV using the sup plied Audio/Video cable. Yo u can connect a subwoofer to the SUBWOOFER Jack.
COAX.
OPT.
DIGITAL
Y
Important
• Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.
• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.
RS-232C terminal/ FLASHER IN
Control terminal for use by custom installers.
REMOTE CONTROL
IN
RS-232C
FLASHER
INT.
OUT
IN
AC IN
EXT.
10
See Note:
Remote Switch
Connecting audio/video cables
Be sure to insert each plug fully for the best con nec tion. The plugs and jacks are color-cod ed to make con nec tion easier.
Connecting system control cables
By connecting this DVD player to another Marantz audio component using a supplied system control cable, you can remotely operate the components as a single system.
• When con nect ing to a com po nent with a
remote sensor, be sure to connect the REMOTE CON TROL IN jack of this DVD player to the REMOTE CON TROL OUT jack of the com po nent with the remote sensor.
• When connecting to component which is not equipped with a remote sensor, be sure to connect the com po nent to the REMOTE CONTROL OUT jack of this DVD player.
INT.
EXT.
Plug into a
3
standard AC wall outlet.
Note
• When connecting to a standard TV, select
4:3 LETTER BOX or 4:3 PAN SCAN in the TV Aspect setting (see page 44).
• Connect the video output of the player directly to your TV. Because the player is de signed to support an Analog Protection System copy protection, there are cases when proper playback will not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.
• The player’s video output and S1 output are not be progressive.
Remote switch
When using this DVD player independently, set
this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL).Change the switch setting using a pen with a sharp tip etc.
Flasher Input
This is used when controlling components
from different rooms with a keypad or other input device. Set the remote switch to EXT.
(EX TER NAL) when using a fl asher input.
2Connecting Up
Home theater video con nec tions
This player outputs video in a number of different ways. Choose the one most suit able for your system using the guide below.
If your TV has a component video input, we
1
rec om mend using it to connect directly to the COM PO NENT VIDEO OUT of this player. Use the standard 3-jack component video output.
CENTER
FRONT
L
R
COAX.
OPT.
MIXED 2CH
AUDIO OUT
RCB
COMPONENT
DIGITAL
Y
C
If your TV and projector have
3
a HDMI terminal for Video and
SUB W.
SURR.
Ver1.1
Audio Input, we recommend using it to connect directly to the HDMI out of this player.
L
R
VIDEO
S1
VIDEO OUT
HDMI
If a component input
2
is not available to you, connect this player to your TV or AV receiver using either the VIDEO or S1 jacks.
Important
• Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.
• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be dam aged.
REMOTE CONTROL
IN
RS-232C
FLASHER
INT.
OUT
IN
Plug into a standard
4
AC wall outlet.
AC IN
EXT.
English
S-Video or composite video?
S-Video should give a better picture, so if you have an S-Video input, use it. S-Video cables are available from any good audio/ visual dealer.
Connecting HDMI cables
With an HDMI cable, both uncompressed video data and digital audio data (e.g., LPCM or bit stream data such as Dolby Digital, DTS, MPEG data or DVD Audio Multi channel) can be trans mit ted with just a single connector.
By transmitting DVD image data directly as digital data without it being fi rst converted into analog format, it becomes possible to provide the very fi nest in image quality (see
pages 6, 40, 41, 46).
Note
• The HDMI output of this unit can be con nect ed to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-com pat i ble DVI input.
• There may be no image output if con nect ed to a TV or display that is not com pat i ble with the above format.
• Refer to the instruction manual of the TV or display to be connected to this unit for detailed information regarding the HDMI terminal.
• When connecting a progressive input TV with the component output of the player, select ON in the Progressive setting (see page 44).
11
Connecting Up2
Home theater audio connections
This player outputs multi-channel audio in digital form. Check the manual for your amplifi er/receiver to see what equipment it is com pat i ble with (especially which digital formats such as Dolby Digital, DTS, etc. It can decode).
If your amplifi er has 5.1 channel analog
1 2
inputs, connect them here. Connect to the L (left)/R (right), SURR.L/.R (SURROUND L/R), CENTER and SUB WOOFER inputs of your amplifi er.
CENTER
FRONT
Ver1.1
SUB W.
L
R
COAX.
OPT.
MIXED 2CH
SURR.
DIGITAL
AUDIO OUT
Y
C
RCB
COMPONENT
Connect to the coaxial or
3
optical input of your amplifi er if it has digital inputs.
S1
VIDEO OUT
L
R
VIDEO
HDMI
Important
• Before making or changing any rear panel connections, make sure that all com po nents are switched off and unplugged from the wall outlet.
• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.
If your amplifi er has stereo inputs only, connect them here. You can connect a subwoofer to the SUBWOOFER Jack.
REMOTE CONTROL
IN
RS-232C
FLASHER
EXT.
INT.
OUT
Plug into a standard
4
AC wall outlet.
IN
AC IN
Connecting analog audio cables
Be sure to fully insert each plug for the best con nec tion. The plugs and jacks are color-coded to make con nec tion easier.
Connecting coaxial cables
Use an interconnector with a pin-type (also called RCA or phono) plug on each end to connect up digital coaxial­type jacks. Make sure that the plug is pushed fully home.
Connecting optical cables
Optical intercon­nects only plug in one way, so make sure the plug is correctly lined up with the jack before in sert ion. When in sert ing the plug,
COAX
OPT
the pro tec tive shutter will open and you should hear it click into po si tion when fully in sert ed. Be careful that you do not force the plug, because this could result in dam­ age to the protective shutter, the cable, or the unit itself.
Note
• If you listen to mul ti chan nel DVD-Audio through one of the digital outputs, it will be downmixed to stereo. Also, high sampling rate DVD-Audio (192 kHz or 176.4 kHz) will be downsampled to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz, depending on the disc. Multi channel and high sampling rate DVD-Audio are only available through the analog outputs.
• All DVD-Audio and all Super Audio CD audio are output only through the analog outputs. (see
page 39)
12
Controls & Displays
3
Front panel
1
SUPER AUDIO CD/DVD CHANGER VC6001
STANDBY
POWER
ON/STANDBY
5
1 STANDBY indicator
• Lights when the unit is in standby.
2 Disc tray
• Place the disc here.
3 MULTI-CH indicator
• Lights when playing a multi-channel audio source.
4 0 (OPEN/CLOSE)
• Press to open and close the disc tray.
5 POWER ON/STANDBY
• Press to turn the power on, and press it again to enter STANDBY mode.
6 DISC (1, 2, 3, 4, 5)/LEDspage 15
• Use to select and directly play back the preferred disc.
• Each LED fl ashes green when the button is selected.
7 SA-CD indicator
• Lights when the player detects a Super Audio CD signal.
8 DVD-AUDIO indicator
• Lights when the player detects a DVD-AUDIO signal.
9 Display
• Operation indications are displayed here.
10 AUDIO EX
• Lights when the AUDIO EX is activated using the AUDIO EX button on the remote control.
• The sound quality of analog audio output is
improved by turning off analog video signal output and the front panel display.
• It is applied to CDDA, Super Audio CD, DVD Audio and DTS CD in Play mode.
DISC
1
2345
6
SA-CD
DVD AUDIO
7
8
2
MULTI CH
AUDIO EX.
9
11 HDMI indicator
• When the connected device is HDMI/DVI
12 HDMIpage 46
• The HDMI on/off state toggles when pressed
• Pressing this button while HDMI is enabled
480p Æ 576p Æ 720p Æ 10 8 0 i Æ 10 8 0 p Æ
13 4/
• Press to skip reverse title/group, chapter, or track.
14 ¡/
• Press to skip forward title/group, chapter, or
15 3 (PLAY)
• Begins playing the disc play.
16 7 (STOP)
• Stops playing the disc play.
17 8 (PAUSE)
• Pauses playing the disc play.
3
~
!@
PLAY
HDMI
-
=
0
4
OPEN/CLOSE
PAUSE
STOP
$
#
compatible, the light fl ashes red.
for three seconds or more. When on, the HDMI indicator is lit.
displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the se quence below:
480p
1
Yo u can also press and hold this button for Fast Reversed.
¢
track. You can also press and hold this button for Fast Forward.
English
13
Controls & Displays3
14
Remote control
1
2 3 4
5
6
7
8
9 0
-
=
~
1 AUDIO EX – Press to turn AUDIO EX off
and on
• The sound quality of analog audio output is
improved by turning off analog video signal output and the front panel display.
• HDMI video output cannot be switched off.
2 OPEN/CLOSE – Disc tray open/close –
page 15 3 ZOOM – pages 25, 30 4 HDMI – page 46
• The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.
• Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the se quence below:
480p Æ 576p Æ 720p Æ 1080i Æ 10 8 0 p Æ
480p
! @
#
$
% ^
&
* ( ) _
+
¡
5 REPEAT – pages 22, 29 A–B – page 23 6 ANGLE – pages 24, 30 7 INPUT (%/fi) button – These buttons can
switch between devices compatible with MARANTZ receivers. Refer to the receiver instruction manual for further details.
Applicable models: PM-11S1, PM-15S1, PM6001, PM7001, PM8001, SR9600. (These models may not be handled depending on the area.)
Non-applicable models: MARANTZ Amplifi ers
and receivers which had released before 2006, including PM-14, PM-17 and PM4001 except above models.
8 4 (PREV.)/¢ (NEXT)– Skip – pages
16, 17, 19, 20, 29, 30, 50
Allows you to search forward/backward through a disc. Use to skip the title, chapter or track.
Press and hold (4) for Fast Reversed.
Press and hold (¢) for Fast Forward.
9 SCAN – pages 18, 19 10 TOP MENU (TOP-M)/RETURN – page 17 11 Cursor (2/3/5/∞) / ENTER button 12 DISPLAY (DISP.) – page 26 13 DISC SKIP –
Selects another disc – page 15
14 POWER – Switches the player on or into
standby – page 15
15 SOUND MODE– Selects Audio out mode
and change the Super Audio CD Play back area – pages 25, 38
16 PA G E – Turns the pages of DVD-Audio still
pictures – page 22
17 RANDOM – page 23 18 A U D IO – Changes the Hybrid Super Audio
CD Play back layer – page 25 19 SUBTITLE – pages 24, 32 20 VOLUME (5/∞) button – These buttons
can adjust the volume of devices compatible
with MARANTZ receivers. Refer to the
receiver instruction manual for further
details. 21 MUTE button – This button can activate the
mute function of devices compatible with
MARANTZ receivers. Refer to the receiver
instructions for further details.
3
22
(PLAY) – pages 15, 16, 20, 21, 29, 31, 32 23 8 (PAUSE) – pages 16, 21 24 7 (STOP) – pages 16, 30, 31, 33, 48 25 MENU – pages 17, 19, 24 26 SETUP – pages 33, 35, 38, 43, 48
27 Number buttons
Note
HDMI ON is set when the unit is shipped from
the factory.
• Set HDMI under the DVD Setup Menu to use HDMI functions (see pages 40, 41, 46).
Getting Started
4
Playing discs
The basic playback controls for playing discs are covered here. Further functions are detailed in the next chapter.
1 Press the POWER ON/STANDBY button
2 Press OPEN/CLOSE to open the disc tray.
3 Load a disc.
Note
Throughout this manual, the term “DVD” means DVD-Video, and DVD±R/RW. If a function is specifi c to a particular kind of DVD disc, it is specifi ed.
on the front panel or POWER button on
the remote control.
If you are playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input.
Place the chosen discs in the tray, printed side up. (If you’re loading a double-sided DVD disc, load it with the side you want to play face down.)
English
4
Press 3 (PLAY) to start playback.
The disc tray closes and playback starts automatically and in sequence for all of the discs loaded in the tray. To play back a specifi c disc directly, press DISC SKIP repeatedly on the remote control or press DISC (1, 2, 3, 4, 5) on the front panel (see page 13). If you are playing a DVD or Video CD, a menu may appear (see page 17).
Note
For one-sided, two-layer discs containing movies, etc., there may be a short image stoppage at the point where the layers change. This is not a malfunction.
Depending on the DVD or VIDEO CD, some operations may be different or restricted.
15
Getting Started4
Basic playback controls
Button What it does
3
Starts playback.
8
7
Stops playback.
4
¢
• Skips to the next track or chapter.
Numbers
ENTER Select the current menu option.
Resuming playback from the last stopped point
This DVD system is able to resume disc
playback from its last stopped point (only possible for the last 10 discs that were recorded without a menu).
In title menu, it functions as the Enter key.
Pauses a disc that’s playing. Each time the button is pressed, a new frame will appear.
Skips to the start of the current track or
chapter, then to previous tracks/chapters.
Press and hold for Fast Reversed.
Press and hold for Fast Forward.
Playback starts from the selected track/chapter number.
1 Load one of the last 10 discs played.
2
While “LOADING” appears on the display
3
start playback from
panel, press PLAY
to
the last stop point.
To cancel the resume mode
Press 7 twice.
Important
While using the DVD playback controls, you may see the mark displayed on-screen. The mark means that the operation is not allowed by the player and disc.
16
Getting Started
4
Navigating DVD disc menus
Many DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or TOP-M.
Note
• Some DVD-Audio discs feature a “Bonus Group”. To access this group you have to input a password that you can fi nd on the disc’s packaging (see page 35).
Button What it does
TOP- M Displays the “top menu” of a DVD disc. This
varies with the disc.
MENU Displays a DVD disc menu—this varies with
the disc and may be the same as the “top menu”.
RETURN Returns to the previously displayed menu
screen.
Cursor Moves the cursor around the screen.
(2/3/5/∞)
ENTER Selects the current menu option.
Numbers Selects a numbered menu option
(some discs only).
Navigating Video CD PBC menus
Some Video CDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus.
Press the MENU to turn the PBC function on or off.
English
Note
• Some discs don’t allow PBC menus.
Button What it does
RETURN Displays the PBC menu.
Numbers Selects a numbered menu option.
ENTER Selects the current menu option.
4
Displays the previous menu page
¢
Displays the next menu page
(if there is one).
(if there is one).
17
Playing Discs5
Preview function
Video-CD SVCD DVD-Video CD
1 Press SCAN.
SVCD VCD
SELECT DIGEST TYPE
TRACK DIGEST
DISC INTERVAL TRACK INTERVAL
DVD
SELECT DIGEST TYPE
TITLE DIGEST
TITLE INTERVAL
SELECT DIGEST TYPE
GROUP DIGEST
TRACK DIGEST GROUP INTERVAL TRACK INTERVAL
Introduction
• Many of the functions covered in this chapter apply to DVD discs, Video CDs and CDs, although the exact operation of some varies slightly with the kind of disc loaded.
• When playing DVD discs, if the icon appears on-screen when you try to use a particular function, either the player or the disc doesn’t allow the use of that function.
• When playing Video CDs, some of the functions are not available in PBC mode. If you want to use them, press the
MENU to turn the PBC function off (see page 17).
2 Use the 5/∞ keys to select one of the
following options and press ENTER.
This option is only available during playback mode.
TRACK/TITLE/CHAPTER DIGEST – View six
different TRACK/TITLE/CHAPTER on one screen each time. This allows you to have a quick glance at all the TRACK/TITLE/CHAPTER on the disc.
DISC INTERVAL – View the whole disc in six
thumbnail pictures. It divides a disc into six portions at regular intervals and displays them on one screen.
TRACK INTERVAL – View the content of a single
track in six thumbnail pictures. It divides a single track into six portions at regular intervals and displays them on one screen.
TITLE INTERVAL/CHAPTER INTERVAL – View
the content of a single TITLE/single CHAPTER in six thumbnail pictures. It divides a single TITLE/ CHAPTER into six portions at regular intervals and displays them on one screen.
GROUP/TRACK DIGEST – GROUP/TRACK
DIGEST will playback the fi rst 3 to 4 seconds of every title/chapter available in the disc/current title.
18
Loading...
+ 42 hidden pages