AV Surround Receiver
SR6009
English
DEutsch
Français
italiano
EsPaÑol
nEDErlanDs
Quick Start Guide
Kurzanleitung
Guide de démarrage rapide
Guida di avvio rapido
Guía de inicio rápido
Snelhandleiding
Snabbstartsguide
Краткое руководство пользователя
Skrócona instrukcja obsługi
sVEnsKa
РУССКИЙ
PolsKi
Welcome Before You Begin
Thank you for choosing a Marantz AV
receiver. This guide provides step-bystep instructions for setting up your AV
receiver.
Please do not return this unit to the
store – call for assistance.
If you need help… :
If you need additional help in solving
problems, contact Marantz customer
service in your area.
www.marantz.com
Required for Setup
TV Speaker cables
HDMI cable Subwoofer cable Speaker systems
Optional
or
LAN cable Wi-Fi router
• When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC
functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).
1
What’s In the Box
Quick Start Guide FM indoor antenna
Owner’s Manual AM loop antenna
Safety Instructions Sound calibration
microphone
Notes on radio Sound calibration
microphone stand
Cable labels Remote control unit
Receiver R03/AAA batteries
Power cord External antennas
for Bluetooth/
Wireless
connectivity
The supplied Sound calibration microphone stand is convenient for use when
performing Speaker Calibration. Using your own tripod or the supplied Sound
calibration microphone stand enables settings to be automatically configured to
the optimum listening environment, providing exceptionally high performance.
2
Important: External Antennas
The removable external antennas are required for both
Bluetooth and Wireless network connectivity. Please make
sure to connect the antennas before attempting to use the
Bluetooth or Wi-Fi features of the SR6009.
n Connecting the external antennas for
Bluetooth/Wireless connectivity
For each of the two antennas:
1)
Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear panel.
2)
Turn the antenna clockwise until it is fully connected. Do
not over tighten.
3)
Rotate the antenna upwards for the best possible
reception.
qwe
CENTER SURROUND
FRONT
SURROUND BACK
SURROUNDFRONT
SURROUND BACK
3
Setup
There are three steps to the setup
process.
Installing batteries in the remote control unit
1
Connecting the receiver
2
Following the On-Screen Setup Assistant
3
Installing batteries in the
1
remote control unit
R03/AAA batteries
4
2
Connecting the receiver
2.1) Place the receiver near your TV and
connect the power cord.
TV
Receiver
Power cord
(supplied)
Connect to household
power outlet
(AC 230 V, 50/60 Hz)
5
2.2) Connect to the network.
Wired LAN
When connecting cables (wired connection), connect a LAN
cable between your receiver and your network router.
Internet
FRONT
Router
CENTER SURROUND
Modem
To WAN side
To LAN port
SURROUND BACK
SURROUND BACK
SURROUNDFRONT
Wireless LAN
When connecting to wireless LAN (Wi-Fi), follow the
instructions in “Connecting the external antennas for
Bluetooth/Wireless connectivity” and connect the antennas.
Internet Modem
Router with
access point
FRONT
CENTER SURROUND
SURROUNDFRONT
SURROUND BACK
To WAN side
SURROUND BACK
6
2.3) Connect the receiver to your TV
with an HDMI cable.
HDMI IN
$5&
2.4) Turn on the TV.
HDMI cable
MONITOR1
ARC
HDMI OUT
MONITOR
$5&
FRONT
CENTERSURROUND
SURROUNDFRONT
SURROUND BACK
SURROUND BACK
2.5) Select the appropriate HDMI input
on your TV.
HDMI
TV remote control unit
TV/
INPUT
or
VIDEO
Receiver (Rear panel)
TV remote control unit
7
2.6) Turn on the receiver.
2.7) Verify the connection.
•Press X to turn on the receiver.
•Verify that you can see this screen on your TV.
AV Reciever Setup Assistant
Please select a language...
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Pусский
Polski
If this screen is not displayed, please go back and
retry the steps again in the recommended sequence.
8
3
Following the On-Screen Setup Assistant
The Setup Assistant will walk you through connecting and
configuring your speakers and components to your Marantz
receiver. Please use the remote control and follow the
on-screen instructions.
AV Reciever Setup Assistant
Please select a language...
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Pусский
Polski
9
Owner’s Manual
Please reference to the Owner's Manual for more details about the setup and operation of the receiver and its features.
n Online Version
Enter the following URL into your web browser:
manuals.marantz.com/SR6009/EU/EN/
Online Manual
Contents
Overview
Connections
Playback
Settings
Tips
Appendix
PDF
PDF Download
WEB Manual
AV Surround Receiver
SR6009
AV Surround Receiver
c
Copyright 2014 D&M Holdings Inc. All Rights Reserved.
n Printable Version
Access the print version of the owner's manual from the
included CD-ROM or select the “PDF Download” link
from the Online Version.
1
Insert the disc into
your PC.
2
Follow the screen or double click on
the PDF le.
10
Printed in China 5411 11197 01AM
D&M Holdings Inc.
Loading...