Service Manual
74 SD50/31B/32B/37B
Stereo cassette deck
For repair information of the cassette mechanism see Service Manual of 'Recorders tape deck CMAY1Z338A/CMAY1Z339A
TABLE OF CONTENTS
| ECTION |
|---|
| I. BLUCK DIAGRAM |
| 2. CONNECTION DIAGRAM |
| 3. SCHEMATIC DIAGRAM AND PARTS LOCATION (pattern side) |
| 4. COUNTER METER FL (VU01) |
| 5. EXPLODED VIEW AND PARTS LIST |
| 3. TEST EQUIPMENT REQUIRED FOR SERVICING |
| 7. DISASSEMBLY |
| 3. ELECTRICAL ADJUSTMENTS |
| 3. SERVICE ROUTINE OF MICRO-PROCESSOR |
| ). ELECTRICAL PARTS LIST |
meancare and zz®
model SD-50R
First issue: 1990 4822 725 50921
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound.
Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for which it is famous.
Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS:
Parts can be ordered either by mail or by telex. In both cases, correct part number has to be specified. The following information must be supplied to eliminate delays in processing your order:
- 1. Complete address
- 2. Complete part numbers and quantities required
- 3. Description of parts
- 4. Model number for which part is required
- 5. Way of shipment
- 6. Signature: any order form or telex must be signed otherwise such part order will be considered as null and void.
PARTS ORDERING
Parts may be ordered at the following addresses:
AUSTRIA HORNYPHON Vertriebsgesellschaft GmbH Wienerbergstrasse 1
A 1101 Wien Austria Telex: 132.332
BELGIUM
SVD DIVISION MARANTZ Industrialaan 1 1720 Groot-Bijgaarden Belgium Telex: 24466
CHILE
MARANTZ DIVISION OF PHILIPS S.A. AV. Santa Maria, 0760 Casilla 2687 Santiago Telex: 240.239
DENMARK
MARANTZ DIVISION OF PHILIPS SERVICE A/S Prags Boulevard 80 Postbox 1919 DK-2300 København S Denmark Telex: 31201
FINLAND MARANTZ DIVISION OF OY PHILIPS Ab Kaivokatu 8 00100 Helsinki Finland Telex: 124811
4 Rue Bernard Palissy 92600 Asnières France Telex: 611651
Elpro Marantz Wint Hontlaan 28 3526 KV Utrecht The Netherlands Telex: 4748
NORWAY
Sandstuveien 40 0680 Oslo 6 Norway Telex: 72640
GREAT BRITAIN MARANTZ AUDIO U.K. Ltd Unit 15/16 Saxon Way Industrial Estate Moor Lane Harmondsworth UB7 OLW Great Britain Telex: 935196
GREECE SHERTON ELECTRONICS S.A. P.O.Box 21025 Hippocratus Street 188 Athens 11471 Greece Telex: 216.795
JAPAN MARANTZ JAPAN, Inc. 35-1, 7-chome, Sagamiono Sagamihara-shi, Kanagawa Japan
KUWAIT
AL ALAMIAH ELECTRONICS Ussama Building Fahd al Saleem Street P.O.Box 23781 Safat-Kuwait Telex: 22694
ITALY
MARANTZ ITALIANA S.P.A. Via Chiese, 74 20126 Milano Italy
SAUDI ARABIA AL ALAMIAH ELECTRONICS P.O.Box 5954 University Street Riyadh 11432 Saudi Arabia Telex: 401530
SOUTH AFRICA
MARANTZ DIVISION OF PHILIPS S.A. Main Road Martindale P.O. Box. 58088 Newville 21114 South Africa
SPAIN PHONO S.A. Ignacio Iglesias 10 Badalona (Barcelona) Spain Telex: 59355
SWEDEN
MARANTZ DIVISION OF PHILIPS Försäljning AB Tegeluddsvägen 1 S-115 84 Stockholm Sweden Telex: 14060
SWITZERLAND
MARANTZ Technischer Service Duenstrasse 3 3186 Düdingen Switzerland
TURKEY
DOGRUOL Ltd. I.M.C. 6 Blok N°6310 Unkapani Istanbul Turkey Telex: 22085
MALTA CACHIA & GALEA Republic Street, 68D Valetta Telex: 1682
PORTUGAL
MARANT7 Divisao philips S.A. service Outurela-carnaxide 2795 LinDA-A-VELHA Telex: 43906
All of the above locations are fully equipped to take care of your total service needs. Because various countries have differing configuration requirements, it is necessary that you contact the service facility in your particular country. In the event that there is no service location listed for your country, please, contact the nearest facility for the necessary assistance.
In case of difficulties, do not hesitate to contact the Technical Department at abovementioned address.
MARANTZ INTERNATIONAL Vestdijk 9 5600 MD Eindhoven The Netherlands Phone: +31/40.758290 Telefax: +31/40.75.82.99 Telex: 35000 PHTC NL routing IND NLMTFAT
FRANCE MARANTZ FRANCE
GERMANY
MARANTZ GERMANY GmbH Alexanderstrasse 1 2000 Hamburg Germany
THE NETHERLANDS
MARANT7 DIVISION OF PHILIPS A/S
TECHNICAL SPECIFICATIONS (DIN)
| Motor(s) and type | Two DC |
|---|---|
| Number of heads |
| Frequency range (3 dB limits—no Dolby) |
|---|
| Type IV (metal) tape |
| Type II (CrO 2 ) tape |
| Type I (Fe/Normal) tape |
| Signal to noise ratio (CrO2 tape at 1 kHz) (no Dolby/Dolby B/C) |
| Wow and flutter (RMS weighted) |
| Output level/impedance |
| Headphone output |
Dimensions
| Width | mm | |
|---|---|---|
| Height | mm | |
| Depth | mm | |
| Net | weight | .1kg |
Power supply
| N version | . 220 V AC 50/60 Hz |
|---|---|
| Tversion | . 240 V AC 50/60 Hz |
| E version (4 voltages) | -240 V AC 50/60 Hz |
Specifications subject to change without prior notice.
-2-
MZ 2591
3. SCHEMATIC DIAGRAM AND PARTS LOCATIONS (PATTERN SIDE)
MZ 2594
10
ponent substitution (other tha or electrical shock hazard.
Symbol A Fire or electrical shock hazard. Only original parts should be used to replace any part marked with symbol A. Any other component substitution (other than original type), may increase risk of fire
B B C B C C B C
4. COUNTER METER FL (VU01)
4-1. TERMINAL CONNECTION
| TERMINAL NO | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ELECTRODE | F | F | 6G | (SI) | ($2) | (53) | 6G | ($4) | NP | 5G | (S6) | (S7) | 4G | (S8) | 3G | ($9) | ||||
| TERMINAL NO. | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 |
| ELECTRODE | (S10 | )(SII) | (SI2) | NP | 3G | ١C | ١C | 2G | NP | (S5) | (a) | (1) | (m) | 2 G | (p) | (k) | (0) | (n) | (j) | NP |
| TERMINAL NO. | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | |||||
| ELECTRODE | (|) | (h) | (d) | (e) | (c) | 2 G | (g) | (f) | (ь) | NP | (SI3) | 2G | ١G | F | F |
NOTES F FILAMENT
G GRID NP NO PIN IC INTERNALLY CONNECTET PIN
4-2. INTERNAL CONNECTION
NOTE ON SAFETY:
Symbol A Fire or electrical shock hazard. Only original parts should be used to replace any part marked with symbol A . Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.
| B | ||
|---|---|---|
| ≥ | ||
| 04 | ||
| J | 04 |
| - | D 53 |
128
x8( |
M) |
|---|---|---|---|
| 2 | • | ||
-006G
|
REF.
DESIG. |
PART NO. | DESCRIPTION |
|---|---|---|
| SD50/31B/32B/37B | ||
| 002B | 4822 443 40938 | Front Panel |
| 003B | 4822 410 60857 | Button, Mecha/Mode |
| 005B | 4822 410 60855 | Button, M. Call |
| 007B | 4822 459 10943 | Badge, Marantz |
| 008B | 4822 450 61603 | Window, FL |
| 009B | 4822 532 70315 | Bushing, Level Knob |
| 010B | 4822 459 80703 | Escutchon, Front Panel |
| 0118 | 4822 410 60856 | Button, Play |
| 0128 | 4822 410 00397 | Button, Eject |
| 0136 | 4622 403 53600 | Lever, Eject |
| 020B | 4822 410 60395 | Button Power |
| 021B | 4822 403 53864 | Link, Power Switch |
| 022B | 4822 413 31574 | Knob, Timer |
| 024B | 4822 410 60197 | Button, NR/BC/MPX |
| 025B | 4822 410 60873 | Knob |
| 026B | 4822 413 31572 | Knob, Rec Level |
| 027B | 4822 403 53806 | Holder, FL |
| 028B | 4822 454 12431 | Sticker, FL |
| 035B | 4822 443 63096 | Cover Assembly, Cassette |
| 1000 050 01550 | ||
| 001C | 4822 256 91556 | Holder Assembly, Cassette |
| 0040 | 4822 492 70383 | Spring, Cassette Holder |
| 0090 | 4822 400 92307 | Dumper, Gear |
| 0066 | 4822 462 41477 | Lea |
| 030G | 4822 532 60948 | Bushing AC Cord |
| Bushing, no oord | ||
| A J091 | 4822 272 10227 | Voltage Selector/31B |
| A L801 | 4822 146 21565 | Power Transformer/32B/37B |
| 4822 146 21566 | Power Transformer/31B | |
| W012 | 4822 267 31133 | Jack, AC Adapter/31B |
| 004 T | 1000 700 00001 | |
| 0011 | 4822 736 20804 | User Manual |
| FCR-50/FCR-40 | ||
| 002B | 4822 443 40936 | Front Panel (FCR-50) |
| 4822 443 40937 | Front Panel (FCR-40) | |
| 003B | 4822 410 60853 | Button, Mecha/Mode (FCR-50) |
| 4822 410 60854 | Button, Mecha/Mode (FCR-40) | |
| 005B | 4822 410 60855 | Button, M. Call (FCR-50) |
| 007B | 4822 454 40107 | Badge, Philips |
| 0088 | 4822 450 61604 | Window, FL |
| 0098 | 4822 532 70315 | Bushing, Level Knob (FCR-50) |
| 0108 | 4822 459 80703 | Escutchon, Eject Button |
| ULIP | 4022 410 00002 | Button, Flay |
| 012B | 4822 410 60454 | Button Fiect |
| 013B | 4822 403 53866 | Lever, Eject |
| 020B | 4822 410 60395 | Button, Power |
| 021B | 4822 403 53864 | Link, Power Switch |
| 022B | 4822 413 31574 | Knob, Timer |
| 024B | 4822 410 60197 | Button, NR/BC/MPX |
| 025B | 4822 410 60873 | Knob |
| 026B | 4822 413 31572 | Knob, Rec Level |
| 027B | 4822 403 53806 | Holder, FL |
| 0288 | 4822 454 12431 | Sticker, FL |
| 0358 | 4822 443 63095 | Cover Assembly, Cassette |
| 0010 | 4822 256 91556 | Holder Assembly Cassette |
| 0040 | 4822 492 70383 | Spring Cassette Holder |
| 0090 | 4822 466 92367 | Dumper, Gear |
| Dumper, Cour | ||
| 002D | 4822 501 11008 | Screw, W/W |
| 006G | 4822 462 41402 | Leg |
| 030G | 4822 532 60948 | Bushing, AC Cord |
| A L801 | 4822 146 21564 | Power Transformer |
| 001T | 4822 736 20700 | User Manual (ECD EO) |
| 0011 | 4822 736 20801 | User Manual (FCR-40) |
6. TEST EQUIPMENT REQUIRED FOR SERVICING
For measuring or checking your Cassette Deck, the following instruments and materials are necessary.
- Audio Oscillator (AF OSC)
- Attenuator (600 Ω)
- VTVM (mV—meter)
- Oscilloscope
- Wow and Flutter Meter
- Torque Meter (Cassette Type)
- Digital Frequency Counter
-
Black Tapes (Completely erased with bulk eraser) AC-212 (Normal) AC-512 (CrO2)
- AC-712 (Metal)
7. DISASSEMBLY
NOTE:
If any doubt is noted in a measured value, use new tape.
Test Tape TCC-111·MTT-111 Wow and Flutter, Tape Speed Signal-to-Noise Ratio TCC-130·MTT-150 Level Adjustment TCC-161·MTT-256 Frequency Response (for Normal) TCC-261·MTT-356 Frequency Response (for CrO2 and Metal)
TCC-192·MTT-121 Cross Talk TCC-194·MTT-141 Channel Separation TCC-174A·MTT-255M Azimuth adjustment (A-BEX)·(TEAC)
- Mirror cassette 12µm padless TCC-902·MTT-902 Tape travel check
- Head and guide gauge (M-300) THG-801
7-3. REMOVING THE MECHANISM
Remove the screws 1~4.
7-4. REMOVING THE MAIN P.W. BOARD
Remove the screws 1~4.
1) Remove the screws ①~⑤. 2) Remove the Button ⑥ and Knob ⑦, ⑧.
7-1. REMOVING THE TOP COVER Remove the 9 screws 1~9.
7-2. REMOVING THE FRONT PANEL
8. ELECTRICAL ADJUSTMENTS
Precautions before Adjustment
- Before playing the test tape back, thoroughly demagnetize the heads, capstan and similar metal parts using an eraser as the test tape-recorded tone is easily erased.
- Do not place the test tape on any measuring instrument.
- Do not put the test tape near a place where the eraser is used.
- 4. Method of Demagnetization: Turn the eraser power switch on at a remote position far away from the heads. Bring the eraser close to the heads, capstan and other parts to be demagnetized, and move it up and down four or five times to demagnetize. Slowly separate the eraser far away from the parts, and turn the power switch off.
- Do not use any magnetize if from time to time in the course of each adjustment.
- 6. Do not turn semi-fixed resistor more than needed.
- 7. Do not apply locking bond excessively.
ADJUSTMENT POINT COMPONENT SIDE
8-1. HEAD AZIMUTH ADJUSTMENT
- 1. Remove the cassette door lid.
- 2. Set the TAPE SELECT switch to the NORM position.
- Play the 14 kHz signal of the test tape MTT-255M, back. Adjust the head azimuth adjusting screw for maximum VTVM reading.
- If the peak output reads of the right and left channels are different, set the screws to obtain the mechanical center between the peaks.
- After adjustment, repeat the playback and stop setting a few times to make certain of no head azimuth deviation. Then, lock the screws with bond.
- 6. Also in REV mode, perform the steps 2~5.
FORWARD LEFT SCREW REVERSE RIGHT SCREW
8-2. TAPE SPEED ADJUSTMENT
Play the 3 kHz signal of the test type MTT-111, back. Adjust the tape speed adjusting resistor inside the motor for 2990 to 3010 Hz counter indication.
NOTES:
- If a strong shock of similar vibration is applied to the back after adjustment, make certain that the measured tape speed had not changed.
- 2. Be careful that the frequency counter may indicate a wrong value because of too low counter input level.
- Before adjustment, allow for 10 to 20 seconds or more after depressing of the PLAY button.
8-3. PLAYBACK OUTPUT LEVEL ADJUSTMENT
Play the test tape MTT-150 back. Adjust RJ25 (L) and RJ26 (R) for 245 mV playback output level at the test points J601 (L), J601 (R).
NOTES:
- Proceed both for the right and left channels in the same manner.
- 2. This adjustment should be performed after the one for the "Playback Equalizer Adjustment".
8-4. PEAK LEVEL METER ADJUSTMENT
- Follow the same procedures as in the "Playback Output Level Adjustment" section.
- Adjust RX01 (L) and RX02 (R) for D (+0dB) LED PEAK LEVEL meter reading.
8-5. MPX FILTER ADJUSTMENT
- Connect the 1 kHz, 100 mV input signal to the LINE INPUT cord.
- 2. Set up the deck to the recording state.
- 3. Adjust the REC LEVEL control for 0 dB meter reading.
- Adjust the line output level for 0 dB, and push the MPX filter switch to the ON position.
- 5. Turn the input signal to the 19 kHz.
- 6. Adjust L601 (L) and L602 (R) for minimum output level.
NOTES:
- Proceed both for the right and left channels in the same manner.
- If the filter characteristic is better than 30 dB, the MPX filter needs not to be adjusted.
8-6. RECORD/PLAYBACK FREQUENCY RESPONSE ADJUSTMENT AND MEASUREMENT (NORMAL)
Adjusting/measuring conditions
- Apply an input signal of Dolby Level-25 dB 1 kHz, 10 kHz, 12.5 kHz or maximum specification frequency.
- 2. Use test tape AC-224.
Procedure
- Set the unit to the specified recording mode. Reduce the input level by Dolby Level-25dB with the attenuator. Record signals of 1 kHz and 12.5 kHz on the nonrecorded portion of the tape. (Dolby-C position)
- Rewind the tape and play it back. Adjust the bias semifixed resistors R901 (L) and R902 (R) so that the response at 1 kHz and 12.5 kHz is 0 to +1.0 dB.
- 3. After adjustment, record and play back signals of 1 kHz, 10 kHz and 12.5 kHz. Make sure that the level difference between these frequencies meets the following specification.
- Set the Dolby NR switch to the B position. Record and play back signals of 1 kHz and 12.5 kHz. The level difference between these frequencies should meet the following specification.
- Set the Dolby NR switch to the OFF position. Record and play back signals of 1 kHz and 16 kHz. The level difference between these frequencies should meet the following specification.
- 6. Make sure that the channel balance between L and R is within 1 dB at 10 kHz with the Dolby switch OFF.
NOTE:
Compare the level of the 1 kHz signal with the MONITOR at Dolby-C. If the level difference is 1 dB or more, adjust RK01 (L) and RK02 (R) so that the recording level is with in 0.5 dB beforehand.
8-7. RECORD/PLAYBACK FREQUENCY RESPONSE ADJUSTMENT AND MEASUREMENT (CrO2)
Adjusting/measuring conditions
- 1. Apply an input signal of Dolby Level-25 dB 1 kHz, 10
- kHz, 12.5 kHz or maximum specification frequency.
- 2. Use test tape AC-513.
Procedure
- Set the unit to the specified recording mode. Reduce the input level by Dolby Level-25dB with the attenuator. Record signals of 1 kHz and 12.5 kHz (Dolby-C position)
- Rewind the tape and play it back. Adjust the bias semifixed resistor R933 (CrO2).
- After adjustment, record and play back signals of 1 kHz, 10 kHz and 12.5 kHz. Make sure that the level difference between these frequencies meets the following specification.
- Set the Dolby NR switch to the B position. Record and play back signals of 1 kHz and 12.5 kHz. The level difference between these frequencies should meet the following specification.
- Set the Dolby NR switch to the OFF position. Record and play back signals of 1 kHz and 12.5 kHz. The level difference between these frequencies should meet the following specification.
- Make sure that the channel balance between L and R is within 1 dB at 10 kHz with the Dolby switch OFF.
8-8. RECORD/PLAYBACK FREQUENCY RESPONSE ADJUSTMENT AND MEASUREMENT (METAL)
Adjusting/measuring conditions
- Apply an input signal of Dolby Level -25dB 1 kHz, 10 kHz, 12.5 kHz and maximum specification frequency.
- Use test tape AC-712.
Procedure
- Set the unit to the specified recording mode. Reduce the input level by -25 dB with the attenuator. Record signals of 1 kHz and 12.5 kHz. (Dolby-C position)
- Rewind the tape and play it back. Adjust the bias semifixed resistor R934 (METAL).
- After adjustment, record and play back signals of 1 kHz, 10 kHz and 12.5 kHz. Make sure that the level difference between these frequencies meets the following specification.
- 4. Set the Dolby NR switch to the B position. Record and play back signals of 1 kHz and 12.5 kHz. Make sure that the level difference between these frequencies meets the following specification.
- Set the Dolby NR switch to the OFF position. Record and playback signals of 1 kHz and 16 kHz. The level difference between these frequencies should meet the following specification.
- Make sure that the channel balance between L and R is within 1 dB at 10 kHz with the Dolby switch OFF.
8-9. RECORD/PLAYBACK LEVEL ADJUSTMENT AND MEASUREMENT
Adjusting/measuring conditions
- 1. Use test tapes AC-224 and AC-513, AC712.
- 2. Set the tape speed to 4.8 cm/sec.
Procedure
- Set the unit to the specified recording mode.
- Rewind the tape and play it back. Adjust RK01 (L) and RK02 (R) so that the recording level is the same as the monitor level.
- Make the same procedure for CrO2 and METAL positions.
9. SERVICE ROUTINE OF MICRO-PROCESSOR
Making Power ON while pressing Stop Key and Pause Key results in Service Routine.
NOTE:
Key is not accepted until 4 seconds passed.
Service Routine has 4 modes as follows.
-
1. Endless Play
- Press Play Key to make Play mode. At the end of a Tape it is turned back to it's head and is played again. This Process is repeated automatically. Pressing Stop Key releases this mode.
- 2. Quick Rec
Press Rec Key to make Rec mode directly. If Rew Key is pressed during Rec mode a Tape is returned to the starting point of recording and then it is played automatically.
Pressing Stop Key releases this mode.
3. FL Check
Press Mode Key to light all of FL. Under this state press M Call Key to put out the light of each Segment one by one.
Pressing Stop Key releases this mode.
4. Port Check
When Memo Key is pressed the number of Port and active is indicated in the Character indication. When Reset Key is pressed under this state active in the Port rolls.
Press FF or REW Key to choose the Port. Only output Port is indicated.
Pressing Stop Key releases this mode.
CAUTION:
Disconnect the mechanical connector before performing this check.
Only above-mentioned Key can be accepted by Service Routine. Service Routine is effective until Power becomes OFF and u-COM is reset.
MICROPROCESSOR I/O PINS AND THEIR FUNCTIONS MODEL: SD-50R SYM NO. QU01 TYPE NO. MB88515
| Pin No. | Po | rt Name | 1/0 | Act | Function | Pin No. | o. Port Name | 1/0 | Act | Function | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | EO | EO | 0 | н | 33 | R0 | REC/PLAY | 0 | н | REC/PLAY Mode | |
| 2 | E1 | E1 | 0 | н | 34 | R1 | Quick | Т | L | Quick Reverse | |
| 3 | E2 | E2 | 0 | н | 35 | R2 | B-SKIP | 0 | L | Blank Skip Indicator | |
| 4 | E3 | E3 | 0 | н | 36 | R3 | - | - | - | - | |
| 5 | E4 | E4 | 0 | н | 37 | R4 | - | - | _ | - | |
| 6 | E5 | E5 | 0 | н | 38 | R5 | SARCH | 0 | н | QMS Sense Control | |
| 7 | E6 | E6 | 0 | н | 39 | R6 | QMS | 1 | н | Music Gap | |
| 8 | E7 | E7 | ο | н | 40 | R7 |
QMS
ON/OFF |
I | L |
QMS Select
L-ON (424T) H-OFF |
|
| 9 | E8 | E8 | ο | н | Segment Output | 41 | E37 | REEL-B | I | _ |
Reel Pulse
Q072 (424T) |
| 10 | E9 | E9 | Ο | н | 42 | E36 | REEL-A | I | - | Reel Pulse Q073 | |
| 11 | E10 | E10 | 0 | н | 43 | AVSS | AVSS | - | - | AD Converter GND | |
| 12 | E11 | E11 | ο | н | 44 | AVR - | AVR - | - | - |
AD Converter
Reference GND |
|
| 13 | E12 | E12 | ο | н | 45 | AVR+ | AVR + | _ | _ |
AD Converter
Reference VCC |
|
| 14 | E13 | E13 | ο | н | 46 | AVCC | AVCC | _ | _ |
AD Converter Power
Supply |
|
| 15 | E14 | E14 | 0 | н | 47 | AN7 | - | - | - | _ | |
| 16 | E15 | E15 | ο | н | 48 | AN6 | KEY4 | I | н |
AD Converter Key
Matrix |
|
| 17 | E16 | E16 | ο | н | 49 | AN5 | KEY3 | I | н |
AD Converter Key
Matrix |
|
| 18 | E17 | E17 | ο | н | 50 | AN4 | KEY2 | Ι | н |
AD Converter Key
Matrix |
|
| 19 | E18 | E18 | о | н | 51 | AN3 | KEY1 | I | н |
AD Converter Key
Matrix |
|
| 20 | E19 | E19 | ο | н | Digit Output | 52 | AN2 | KEY0 | I | н |
AD Converter Key
Matrix |
| 21 | E20 | E20 | ο | н | 53 | AN1 | MET R | I | н | Rch Level Meter | |
| 22 | E21 | E21 | 0 | н | 54 | ANO | METL | Ι | н | Lch Level Meter | |
| 23 | E22 | E22 | 0 | н | 55 | R8 | R-Mute | 0 | L | REC Mute | |
| 24 | E23 | E23 | 0 | н | 56 | R9 | Bias | 0 | L | Bias Control | |
| 25 | Ex | MAIN CLK | Ι | - | Clock Input | 57 | RO | L-Mute | 0 | L | Line Mute |
| 26 | х | MAIN CLK | 0 | - | Clock Output | 58 | R11 | RTC | 0 | н | Reel Motor Torque |
| 27 | RESET | RESET | I | н | Reset Input | 59 | R12 | RMZ | 0 | н |
Reel Motor Drive
FWD |
| 28 | S0 | FWD/REV | ο | L |
FWD (H-REV)
Indicate |
60 | R13 | RM1 | 0 | н |
Reel Motor Drive
REV |
| 29 | S1 | RC-5 | I | L |
Remote Control
Input |
61 | R14 | СРМ | 0 | н |
Capstan Motor
Drive |
| 30 | SC | N·C | - | - | — | 62 | R15 | SOL | 0 | L | Solenoid Drive |
| 31 | E27 | P-Down | ο | L |
Power Off Mecha
Reset |
63 | N·C | _ | — | — | N·C |
| 32 | VSS | VSS | - | - | GND | 64 | Vcc | VCC | _ | - . | Power Supply 5V |
10. ELECTRICAL PARTS LIST
| AS | SIGNMENT OF COMMON PARTS CODES. | REF. | PART NO. | DESCRIPT | ION | |
|---|---|---|---|---|---|---|
| R*** : (1) | GD05 140, Carbon film fixed resistor, ±5%, 1/4W | DESIG. | ||||
| R*** : (2) | GD05 160, Carbon film fixed resistor, ±5%, 1/6W | PJ03-MAI | F BOARD | |||
| (424T/42 | 5T) | |||||
| Examples | Registance value | PJ03-CAP | ACITORS | |||
| 0.1Ω001 10Ω100 1kΩ102 100kΩ104 | C601 | 4822 124 22274 | Elect | 4.7μF | 50V | |
| 0.5Ω005 18Ω180 2.7kΩ272 680kΩ684 | C602 | 4822 124 22274 | Elect | 4.7µF | 50V | |
| 1Ω010 100Ω101 10kΩ103 1ΜΩ105 | C603 | 4822 124 22274 | Elect |
4.7µ⊢
4.7µ⊢ |
50V | |
| 6.8Ω068 390Ω391 22kΩ223 4./MΩ4/5 | C604 | 4822 124 22274 | Elect | 4.7μF | 501 | |
| Note) | Please distinguish 1/4W from 1/6W by the shape of parts | C610 | 4822 124 23445 | Elect | 0.56µF | 50V |
| used actually. | C613 | 4822 124 22274 | Elect | 4.7µF | 50V | |
| C614 | 4822 124 22274 | Elect | 4.7µF | 50V | ||
| C***: CEI |
RAMIC CAP.
DD1 270 Coramic condenser |
C615 | 4822 126 10412 | Ceramic | 3900pF | ±20% |
| (1) | Disc type | C616 | 4822 126 10412 | Ceramic | 3900pF | ±20% |
| 12 Temp. coeff. P350 ~ N1000, 50V | 0017 | 4000 104 00074 | Floot | 4 7.5 | FOV | |
| C617 | 4822 124 22274 | Elect | 4.7µF | 50 V | ||
| Capacity value | C610 | 4822 124 22274 | Elect | 4.7µF | 50V | |
| lolerance | C627 | 4822 124 22274 | Elect | 220µF | 25V | |
| C628 | 4822 124 90365 | Elect | 220µF | 25V | ||
| Tolerance (Capacity deviation) | C631 | 4822 124 22274 | Elect | 4.7µF | 50V | |
| ±0.25pF0 | C632 | 4822 124 90365 | Elect | 220µF | 25V | |
| ±0.5pF1 | ||||||
| Tolerano |
± 5%5
The of COMMON PARTS handled here are as follows: |
C801 | 4822 124 22239 | Elect | 3300µF | 25V |
| Tolerand | 0.5pF ~ 5pF±0.25pF | C802 | 4822 124 22239 | Elect | 3300µF | 250 |
| 6pF ~ 10pF±0.5pF | C803 | 4822 124 90365 | Elect | 220µF |
25 V
25 V |
|
| 12pF ~ 560pF ±5% | C804 | 4822 124 90305 | Flect | 3300µF |
25V
16V |
|
| 2 | Capacity value | C807 | 4822 124 90388 | Elect | 3300µF | 16 |
| 0.5pF005 3pF030 100pF101 | C809 | 4822 124 90354 | Elect | 100µF | 16V | |
| 1.5pF. 015 47pF. 470 560pF 561 | C811 | 4822 124 41542 | Elect | 470µF | 50V | |
| C812 | 4822 124 22276 | Elect | 47µF | 50V | ||
| : CE | RAMIC CAP. | C852 | 4822 124 22274 | Elect | 4.7μF | 50V |
| (1) | DK16 300, High dielectric constant ceramic condenser | 0050 | 4000 404 00074 | FOL | ||
| 1 Temp, chara, 2B4, 50V | C853 | 4822 124 22274 | Elect | 4.7μF | +10% | |
| C855 | 4822 120 10411 | Elect | 220µF |
±10‰
25∖ |
||
| Capacity value | 2.001 | 2207 | ||||
| Example | C909 | 4822 126 10734 | Ceramic | 100pF | ±10% | |
| Capacity value | C910 | 4822 126 10734 | Ceramic | 100pF | ±10% | |
| 0 | 100pF101 1000pF102 10000pF103 | C911 | 4822 122 40491 | Ceramic | 0.022µF | +80% -20 |
| 470pF471 2200pF222 | C912 | 4822 122 40491 | Ceramic | 0.022µF | +80% -20 | |
| C913 | 4822 121 43775 | Film | 560pF | ±10% | ||
| C***: ELI | ECTROLY CAP. ( 7 ), FILM CAP. ( 7 ) | C914 | 4822 121 43775 | Film | 560pF | 16 |
| (1) | One-way lead type. Tolerance +20% | C931 | 4822 124 41539 | Elect |
47μF
220μF |
251 |
| C933 | 4822 124 90305 | Elect | 220µF | 25\ | ||
| Dielectric strength | C935 | 4822 124 30303 | Ceramic | 0.022µF | +80% -20 | |
| Capacity value | 4022 122 40401 | Geranne | 0.0222 | 20070 20 | ||
| Evennlee | C936 | 4822 122 40491 | Ceramic | 0.022µF | +80% -20 | |
| Capacity value | C937 | 4822 122 40491 | Ceramic | 0.022µF | +80% -20 | |
| 0 | 0.1μF104 4.7μF475 100μF107 | C938 | 4822 124 41539 | Elect | 47μF | 16\ |
| 0.33μF334 10μF106 330μF337 | C939 | 4822 126 10407 | Ceramic | 3.9pF | ±10% | |
| 1μF105 22μF226 1100μF108 | 0000 | 4000 100 40401 | 0.000 | 100% 20 | ||
| 2200µF228 | CB03 | 4822 122 40491 | Ceramic | +80% -20 | ||
| 6.3V 006 25V 025 | CROA | 4822 122 40401 | (FCR-50) | 0.022 JE | +80% -20 | |
| 10V010 35V035 | 0004 | 4022 122 40451 | (FCB-50) | (SD50/31 | B/32B/37B) | |
| 16V016 50V050 | CB05 | 4822 126 10734 | Ceramic | 100pF | ±10% | |
| (FCR-50) | (SD50/31) | B/32B/37B) | ||||
| (2) | DF15 350, Plastic film condenser | CB06 | 4822 122 40491 | Ceramic | 0.022µF | +80% -20 |
| 1 One-way type, Wylar ± 5% 50V | (FCR-50) | (SD50/31) | B/32B/37B) | |||
| Capacity value | ||||||
| CG01 | 4822 124 22274 | Elect | 4.7µF | 50\ | ||
| Examples | CG02 | 4822 124 22274 | Elect | 4.7µF | 50\ | |
| Capacity value | 0003 | 4822 124 41539 | Elect | 4745 | 16\ | |
| 0.001µF(1000pF)102 0.1µF104 | 0004 | 4022 124 41539 | Elect | 2204E | 251 | |
| 0.01 µF | CGOS | 4822 124 90305 | Elect | 220µF | 251 | |
| 0.015μF | -022 124 90305 | Lieut | 22041 | 201 | ||
| 1 |
25V
16V
50V
50V
25V
16V
25V
25V
16V
50V
50V
16V
16V
25V
25V
+80% -20%
+80% -20%
+80% -20%
+80% -20%
+80% -20%
0.022µF +80% −20%
0.022µF +80% -20%
0.022µF +80% -20%
|
REF.
DESIG. |
PART NO. | DESCRIPT | ION |
REF.
DESIG. |
PART NO. | D | ESCRIPTION |
|---|---|---|---|---|---|---|---|
| CJ01 | 4822 126 11071 | Ceramic 330pF | ±10% | RV01 | 4822 101 11056 |
100KΩ(A)
250KΩ(W) |
x2, Variable |
| CJ02 | 4822 126 11071 | Ceramic 330pF |
-10%
50V |
RV02 | 4822 101 11055 |
250K32(W)
50KΩ(A) |
x2. Variable (FCR-50) |
| CJ03 | 4822 124 22274 | Elect 4.7µF | 50V | (SD50/31B/ | 32B/37B) | ||
| CJ05 | 4822 121 43132 | Elect 330µF | 10V | RV04 | 4822 100 30141 | 5KΩ(B), | , Variable (FCR-50) |
| CJ06 | 4822 121 43132 | Elect 330µF | 10V | (SD50/31B/ | 32B/37B) | ||
| CJ09 | 4822 126 10408 | Ceramic 220pF | ±10% | DV01 | 4922 100 11272 | ATKO T | immina |
| CJ10 | 4822 126 10408 | Ceramic 220pF |
±10%
16V |
BX02 | 4822 100 11372 | 47KΩ, Tr | imming |
| CJ31 | 4822 124 90354 | Elect 100µF | 16V | A RX19 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse |
| 0002 | ARX20 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse | |||
| CK01 | 4822 124 22274 | Elect 4.7µF | 50V | RX31 | 4822 100 11351 | 10KΩ, Tr | imming |
| CK02 | 4822 124 22274 | Elect 4.7µF | 50V | A D620 | 4922 115 00166 | 100 | +2% 1/W Euse |
| CK03 | 4822 124 22274 | Elect 4.7µF | 50V | A B630 | 4822 115 90166 | 1032 | ±2% ¼W. Fuse |
| CK04 | 4822 124 22274 | Elect 1µF | 50V | A R635 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse |
| CK06 | 4822 124 41543 | Elect 1µF | 50V | ||||
| CK07 | A R801 | 4822 116 21086 | 1Ω | ±5% ½W, Fusible | |||
| 2 | 4822 126 10734 | Ceramic 100pF | ±10% | A R803 | 4822 116 60307 |
1Ω
1Ω |
±5% ¼W, Fusible |
| CK12 | 4000 404 445 40 | E lect 1E | FOV | A R805 | 4822 116 60307 | 1000 | +5% ¼W, Fusible |
| CK13 | 4822 124 41543 | Elect 100 |
50V
16V |
B808 | 4822 116 52892 | 10032 | ±5% ¼W |
| CK15 | 4822 124 90354 | Elect 100µF | 161 | A R811 | 4822 116 21086 | 1Ω | ±5% ½W. Fusible |
| CKID | 4022 124 90304 | μιεστ τουμι | A R812 | 4822 116 21086 | 1Ω | ±5% ½W, Fusible | |
| CL03 | 4822 124 22751 | Elect 10µF | 50V | R856 | 4822 116 52115 | 680 Ω | ±5% 1W |
| CL04 | 4822 121 43774 | Film 0.012µF | ±10% | A R859 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse |
| CL05 | 4822 122 40491 | Ceramic 0.022µF | +80% -20% | R860 | 4822 116 52115 | 680 Ω | ±5% 1W |
| A R862 | 4822 115 90166 | 10Ω | ±2% ¼W, ⊢use | ||||
| CM01 | 4822 124 90354 | Elect 100µF | 16V | B901 | 4822 100 11373 | 4.7KΩ Tr | immina |
| 4822 122 40491 | Ceramic 0.022µF | +80% -20% | R902 | 4822 100 11373 | 4.7KΩ, Tr | imming | |
| CIVIOZ | 4022 122 40491 | 10070 -2070 | R933 | 4822 100 11351 | 10KΩ, Tr | imming | |
| CS31 | 4822 124 22274 | Elect 4.7µF | 50V | R934 | 4822 100 11351 | 10KΩ, Tr | imming |
| A R939 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse | ||||
| CU01 | 4822 122 40491 | Ceramic 0.022µF | +80% -20% | A R940 | 4822 115 90166 | 10Ω | ±2% ¼W, Fuse |
| CU02 | 4822 122 40491 | Ceramic 0.022µF | +80% -20% | DIO2 SEMIC | ONDUCTORS | ||
| CU03 | 4822 124 41539 | Elect 4/µF | 16V | D601 | 4822 130 33305 | Diode | 1SS176 etc |
|
CU04
CU05 |
4822 122 40491 | Ceramic 0.022µF | +80% -20% | D602 | 4822 130 80319 | Zener | RD9.1JB2/MTZJ9.1C |
| 0005 | 4022 122 40431 | 0.022 | 20/0 | ||||
| CW02 | 4822 122 40491 | Ceramic 0.022µF | +80% -20% | A D801 | |||
| CW21 | 4822 126 10408 | Ceramic 220pF | ±10% | 2 | 4822 130 32508 | Diode | RL103E/DSF10C |
| CW22 | 4822 126 10408 | Ceramic 220pF | ±10% | A D811 | 4922 120 90210 | Zopor | BD9 1 182/MT7 19 10 |
| CV01 | 1000 101 00074 | Floot 474F | 501/ | D812 | 4822 130 80319 | Diode | 1SS176_etc. |
| CX02 | 4822 124 22274 | Elect 4.7µF | 50V | A D817 | 4822 130 32508 | Diode | RL103E/DSF10C |
| CX02 | 4822 124 22274 | Elect 4.7µF | 50V | A D818 | 4822 130 32508 | Diode | RL103E/DSF10C |
| CX04 | 4822 124 22274 | Elect 4.7µF | 50V | A D851 | 4822 130 32508 | Diode | RL103E/DSF10C |
| D852 | 4822 130 33305 | Diode | 1SS176, etc. | ||||
| PJ03-RESISTORS | D853 | 4822 130 33305 | Diode | 1SS176, etc. | |||
| A RG11 | 4822 115 90166 | 10Ω ±2% | 1/W, Fuse | DOFA | 4022 120 00217 | Zanar | DD5 1 102/MT7 15 10 |
| ARG12 | 4822 115 90166 | 1002 ±2% | ¼w, ⊢use | D854 | 4822 130 80317 | Diode | 1SS176 etc |
| R 125 | 4822 100 11251 | 10KO Trimming | A D856 | 4822 130 32508 | Diode | RL103E/DSF10C | |
| RJ26 | 4822 100 11351 | 10KΩ. Trimming | D857 | 4822 130 33305 | Diode | 1SS176, etc. | |
| A RJ33 | 4822 115 90166 | 10Ω ±2% | ¼W, Fuse | D858 | 4822 130 33305 | Diode | 1SS176, etc. |
| A RJ34 | 4822 115 90166 | 10Ω ±2% | ¼W, Fuse | D859 | 4822 130 33305 | Diode | 1SS176, etc. |
| 0001 | |||||||
| RK01 | 4822 100 11372 | 4/KΩ, Trimming | 0931 | 4822 130 33305 | Diode | 1SS176 etc | |
| 4822 100 11372 | 4/K32, 1 rimming | 1/W Euso | D934 | 4022 100 00000 | Dioue | 100170, 000. | |
| A RK06 | 4822 115 90166 | 10Ω ±2% | 1/4W, Fuse | ||||
| DJ31 | 4822 130 33305 | Diode | 1SS176, etc. | ||||
| RL02 | 4822 116 53628 | 3.3Ω ±5% | 1⁄4W | DK01 | 4000 100 0000E | Diada | 100176 oto |
| DMOS | 1000 116 50017 | 220 +5% | 1//// | DKU1 | 4022 130 33305 | Diode | 133170, etc. |
| RIVIUS | 4022 110 52917 | 2.236 -5% | /2 • • | DL31 | 4822 130 80317 | Zener | RD5.1JB2/MTZJ5.1B |
| RU23 | 4822 100 11373 | 4.7KΩ, Trimming | A DL32 | 4822 130 32508 | Diode | RL103E/DSF10C | |
| A DL33 | 4822 130 32508 | Diode | RL103E/DSF10C | ||||
| I | 1 |
|
REF.
DESIG. |
PART NO. | DESCRIPTION |
REF.
DESIG. |
PART NO. | DESCRIPTION |
|---|---|---|---|---|---|
| DM01 | 4822 130 32508 | Diode RL103E/DSF10C | QL01 | 4822 130 61886 | Transistor 2SD1292 |
| DM02 | 4822 130 33305 | Diode 1SS176, etc. | QL31 | 4822 130 61725 | Transistor 2SD2010 |
| DM03 | 4822 130 33305 | Diode 1SS176, etc. | QL32 | 4822 130 61186 | Transistor, Digital DTA114TS |
| DM81 | 4822 130 80272 | Zener RD7.5JB2/MTZJ7.50 | |||
| DM82 | 4822 130 80132 | Zener MTZJ3.9A | QM01 | 4822 130 61725 | Transistor 2SD2010 |
| QM02 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
| DR01 | 4822 130 33305 | Diode 1SS176, etc. | QM03 | 4822 130 61725 | Transistor 2SD2010 |
| DR02 | 4822 130 33305 | Diode 1SS176, etc. | QM04 | 4822 130 61186 | Transistor, Digital DTA114TS |
| QM05 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
| DS01 | QM06 | 4822 130 61189 | Transistor Digital DTC114TS | ||
| ) | 4822 130 33305 | Diode 1SS176 etc | OM81 | 4822 209 61188 | IC BA6219 |
| DSOF | 4022 100 00000 | 0M82 | 4822 130 61189 | Transistor Digital DTC114TS | |
| 0505 | 4022 120 22205 | Diada 199176 ata | 0M83 | 4822 130 61186 | Transistor, Digital DTA114TS |
| 0307 | 4622 130 33305 | Diode 133170, etc. | 4022 130 01100 | Transistor, Digital DIA11410 | |
| DS08 | 4822 130 33305 | Diode 155176, etc. | 4000 400 04400 | T DIVIN DTAILATC | |
| DS31 | 4822 130 61186 | Transistor, Digital DTA11415 | |||
| ( | 4822 130 33305 | Diode 1SS176, etc. | 0.502 | 4822 130 61186 | Transistor, Digital DIA11415 |
| DS34 | Q$03 | 4822 130 42715 | Transistor 2SA608SP, etc. | ||
| QS04 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
| DU03 | 4822 130 33305 | Diode 1SS176, etc. | QS05 | 4822 130 42715 | Transistor 2SA608SP, etc. |
| DU04 | 4822 130 33305 | Diode 1SS176, etc. | QS06 | 4822 130 61189 | Transistor, Digital DTC114TS |
| Q$07 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
| DX01 | 0508 | 4822 130 61189 | Transistor Digital DTC114TS | ||
| 4922 120 22205 | Diada 199176 ata | 0509 | 4822 130 61189 | Transistor Digital DTC114TS | |
| DYAA | 4022 130 33305 | Diode 133170, etc. | 0$31 | 4822 200 61667 | |
| DX04 | 4822 209 01007 | ||||
| 0532 | 4822 130 61189 | Transistor, Digital DIC11415 | |||
| Q601 | 4822 209 62251 | IC CXA1331 | |||
| Q603 | 4822 130 61189 | Transistor, Digital DTC114TS | QU01 | 4822 209 62943 | Microprocessor MB88515H |
| Q604 | 4822 130 61189 | Transistor, Digital DTC114TS | QU07 | 4822 130 42298 | Transistor 2SC536SP, etc. |
| Q631 | 4822 130 61189 | Transistor, Digital DTC114TS | QU08 | 4822 130 42298 | Transistor 2SC536SP, etc. |
| 0632 | 4822 130 61186 | Transistor Digital DTA114TS | (FCR-50) (SD50/31B/32B/37B) | ||
| Q633 | 4822 130 61189 | Transistor, Digital DTC114TS | QU09 | 4822 130 61145 | Transistor 2SC1740S |
| . 0001 | 4000 000 000 44 | 0.1/21 | 4922 120 61723 | Transistor Disital DTC222TS | |
| A 0801 | 4822 209 62941 | IC NJM/8W08FA | 4022 130 01723 | Transistor, Digital DTC32313 | |
| A 0802 | 4822 209 62942 | IC NJM/9M08FA | 4822 130 61723 | Transistor, Digital DIC32315 | |
| A 0803 | 4822 209 70385 | IC L/8MR05 | |||
| Q851 | 4822 130 42715 | Transistor 2SA608SP, etc. | QX01 | 4822 130 61/23 | Transistor, Digital DTC323TS |
| Q852 | 4822 130 61186 | Transistor, Digital DTA114TS | QX02 | 4822 130 61723 | Transistor, Digital DTC323TS |
| Q853 | 4822 130 61189 | Transistor, Digital DTC114TS | QX03 | 4822 209 61187 | IC BA15218 |
| Q901 | 4822 209 72874 | IC µPC1297CA | PJ03-MISCELLANEOUS | ||
| Q931 | 4822 130 42298 | Transistor 2SC536SP, etc. | JG01 | 4822 267 31126 | Jack, Headphone (FCR-50) |
| (SD50/31B/32B/37B) | |||||
| QB01 | 4822 209 83706 | IC BA335PK | 4822 267 31132 | Jack, Headphone (FCR-40) | |
| (FCR-50) (SD50/31B/32B/37B) | |||||
| QB02 | 4822 130 61189 | Transistor, Digital DTC114TS | L601 | 4822 157 52461 | M.P.X. Coil |
| (ECB-50) (SD50/31B/32B/37B) | 1602 | 4822 157 52461 | MPX Coil | ||
| OB03 | 4822 130 61145 | Transistor 2SC1740S | |||
| 2005 | 4022 100 01140 | (ECD 50) (SD50/21B/22B/27B) | 4822 157 60426 | OSC Transformer 105K Hz | |
| 0004 | 4000 100 01100 | 4822 157 00430 | |||
| UB04 | 4822 130 61189 | Transistor, Digital DICT1415 | 4822 157 60436 | OSC Transformer, TOSKHZ | |
| (FCR-50) (SD50/31B/32B/37B) | L931 | 4822 152 20622 | Choke Coll, 2.2mH | ||
| QB05 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
| (FCR-50) (SD50/31B/32B/37B) | LK01 | 4822 157 53521 | Choke Coil | ||
| QB06 | 4822 130 61189 | Transistor, Digital DTC114TS | LK02 | 4822 157 53521 | Choke Coil |
| (FCR-50) (SD50/31B/32B/37B) | |||||
| LL01 | 4822 148 81074 | OSC Transformer | |||
| OG01 | 4822 209 61187 | IC BA15218 | |||
| 4001 | 1022 200 01107 | Dittorio | 4822 242 72596 | Ceramic Viblator 6 00MHz | |
| 0.101 | 1022 120 61196 | Transistor Digital DTA114TS | |||
| 0,001 | 4022 130 01100 | Transistor, Digital DTA11413 | 6512 | 4922 272 10216 | Rotary Switch Roverse Mode |
| 0,102 | 4822 130 01180 | Transistor, Digital DTAT1415 | 4022 273 10210 | Hotary Switch, neverse Mode | |
| 0131 | 4822 209 73064 | ||||
| QK01 | 4822 209 62252 | IC CXA1198AP | PJ04-LINE IN/OUT, REMOTE IN | ||
| QK03 | 4822 130 61723 | Transistor, Digital DTC323TS | CIRCUIT BOARD | ||
| QK04 | 4822 130 61723 | Transistor, Digital DTC323TS | |||
| QK05 | 4822 130 61189 | Transistor, Digital DTC114TS | CR01 | 4822 122 40491 | Ceramic Cap. 0.022µF +80% –20% |
| QK06 | 4822 130 61189 | Transistor, Digital DTC114TS | CW01 | 4822 122 40491 | Ceramic Cap. 0.022µF +80% -20% |
| OK07 | 4822 130 61189 | Transistor Digital DTC114TS | |||
| QR01 | 4822 130 61189 | Transistor, Digital DTC114TS | |||
|
REF.
DESIG. |
PART NO. | DESCRIPTION | |||||
|---|---|---|---|---|---|---|---|
|
JR01
JW02 |
4822 266 30274
4822 265 30397 |
Terminal, 2P RCA
Terminal, 4P RCA |
|||||
|
PU03-LOGIC/KEY
CIRCUIT BOARD |
|||||||
|
GU01
2 GU05 |
4822 111 91204 | Resistor Array 47KΩx6 | |||||
|
DU01
DU02 |
4822 130 33305
4822 130 33305 |
Diode 1SS176, etc.
Diode 1SS176, etc. |
|||||
|
QS10
QS11 QS12 |
4822 130 61186
4822 130 61186 4822 130 61186 |
Transistor, Digital DTC114TS
Transistor, Digital DTC114TS Transistor, Digital DTC114TS |
|||||
|
QU02
QU03 QU04 QU05 QU06 |
4822 130 61186
4822 130 61189 4822 130 61186 4822 130 61186 4822 130 61186 |
Transistor, Digital DTA114TS
Transistor, Digital DTC114TS Transistor, Digital DTA114TS Transistor, Digital DTA114TS Transistor, Digital DTA114TS |
|||||
|
SS51
SS52 SS53 |
4822 276 11944
4822 276 11944 4822 276 11944 |
Push Switch, Dolby ON/OFF
Push Switch, Dolby B/C Push Switch, MPX ON/OFF |
|||||
|
SU31
SU32 SU33 SU34 |
4822 276 12455
4822 276 12455 4822 276 12455 4822 276 12455 |
Push Switch
Push Switch Push Switch Push Switch (FCR-50) |
|||||
|
SU41
SU42 SU43 |
4822 276 12455
4822 276 12455 4822 276 12455 |
Push Switch
Push Switch Push Switch (FCR-50) (SD50/31B/32B/37B) |
|||||
| SU44 | 4822 276 12455 | Push Switch | |||||
| SU45 | 4822 276 12455 |
Push Switch (FCR-50)
(SD50/31B/32B/37B) |
|||||
|
SU51
SU52 |
4822 276 12455
4822 276 12455 |
Push Switch
Push Switch |
|||||
| SU53 | 4822 276 12455 |
Push Switch (FCR-50)
(SD50/31B/32B/37B) |
|||||
|
SU54
SU55 |
4822 276 12455
4822 276 12455 |
Push Switch
Push Switch (FCR-50) |
|||||
| SU56 | 4822 276 12455 |
(SD50/31B/32B/37B)
Push Switch |
|||||
| VU01 | 4822 130 90899 | Display Unit, FIP6BMW7Y | |||||
|
PU33-TIMER SWITCH
CIRCUIT BOARD |
|||||||
| SS11 | 4822 277 30867 | Slide Switch, Timer | |||||
|
PU83-POWER SWITCH
CIRCUIT BOARD |
|||||||
| A C851 | 4822 122 33276 | Ceramic Cap. 0.01µF ±20% | |||||
| A S851 | 4822 276 11645 | Push Switch, Power | |||||
NOTE ON SAFETY:
Symbol A Fire or electrical shock hazard. Only original parts should be used to replace any part marked with symbol A. Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.
Loading...