Marantz DV6001 User Manual

Model DV6001 User Guide

Super Audio CD/DVD Player

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

CONGRATULATIONS

ON YOUR PURCHASE OF THIS

FINE MARANTZ PRODUCT.

MARANTZ is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments.

We are sure you will be fully satisﬁ ed with the DVD player.

Thank you for your support.

Please read through these operating instructions so you will know how to operate your model properly. After you have ﬁ nished reading the instructions, put them away in a safe place for future reference.

Copy protection

Many DVD discs are encoded with copy pro tec tion. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Cor po ra tion and other rights owners.

Use of this copyright protection technology must be au tho rized by Macrovision Cor po ra tion, and is in tend ed for home and other limited viewing uses only unless oth er wise authorized by Macrovision Corporation.

Reverse en gi neer ing or disassembly is pro hib it ed.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Operating Environment

Operating environment temperature and humidity:

+5°C to +35°C (+41°F to +95°F); less than 85%RH (cooling vents not blocked)

Do not install in the following locations

Location exposed to direct sunlight or strong artiﬁ cial

light

Location exposed to high humidity, or poorly ven ti lat ed

lo ca tion

NOTE:

Changes or mod i ﬁ ca tions not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION :

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVERSHIELD)

IMPORTANT SAFETY INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT (for U. S. A only)

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

Read Instructions – All the safety and operating instructions should be read before the product is operated.

Retain Instructions – The safety and operating instructions should be retained for future reference.

Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

Follow Instructions – All operating and use instructions should be followed.

Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Water and Moisture – Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

CART – A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.

Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a book case or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.

Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.

Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13.

Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

Protective Attachment Plug – The product is equipped with an attachment plug

14. having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

Outdoor Antenna Grounding – If an outside antenna or cable system is connected

15. to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

16.

Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

AC POLARIZED PLUG

17.

Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.

Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

20.

Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

21.

Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

If the product has been dropped or damaged in any way, and

When the product exhibits a distinct change in performance – this indicates a need for service.

22.

Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.

Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24.

Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

25.

Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

GROUND CLAMPS

FIGURE 1

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM

NEC - NATIONAL ELECTRICAL CODE

(NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

English

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme

NMB-003 du Canada.

FCC NOTE (for U. S. A only):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre quen cy energy and, if not installed and used in accordance with the in struc tions, may cause harmful in ter fer ence to radio or television reception, which can be de ter mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is con nect ed.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modiﬁ cations may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.

- Do not place anything about 0.1 meter above the top panel.

- Make a space of about 0.1 meter around the unit.

- No objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

- When the switch is in the OFF position, the equipment is not completely switched off from MAINS.

- The equipment shall be installed near the power supply so that the power supply is easily accessible.

WARRANTY

For warranty information, contact your local Marantz dis trib u tor.

RETAIN YOUR PURCHASE RECEIPT

Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes of when corresponding with Marantz.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme á la norme NMB-003 du Canada.

This product satisﬁ es FCC regulations when shielded cables and connectors are used to connect the unit to other equip ment. To prevent electromagnetic interference with electric ap pli anc es, such as radios and televisions, use shielded cables and connectors for connections.

CE marking (for Europe only)

This product is in conformity with the EMC directive and low-voltage directive.

WARNINGS

- Do not expose the equipment to rain or moisture.

- Do not remove the cover from the equipment.

- Do not insert anything into the equipment through the ventilation holes.

- Do not handle the mains lead with wet hands.

- Do not cover the ventilation with any items such as ta ble cloths, news pa pers, curtains, etc.

- No naked ﬂ ame sources, such as lighted candles, should be placed on the equipment.

- When disposing of used batteries, please comply with gov ern men tal regulations or en vi ron men tal public in struc tion’s rules that apply in your country or area.

IMPORTANT

When seeking warranty service, it is the responsibility of the consumer to es tab lish proof and date of purchase. Your pur-

chase receipt or invoice is adequate for such proof.

FOR U.K. ONLY

This undertaking is in addition to a con sum er’s statutory rights and does not affect those rights in any way.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

A NOTE ABOUT RECYCLING

This product’s packaging materials are re cy cla ble and can be reused. This prod uct and the ac ces so ries packed together are the ap pli ca ble prod uct to the WEEE di rec tive ex cept bat ter ies. Please dispose of any materials in ac cor dance with your local recycling reg u la tions. When discarding the unit, comply with your lo cal rules or reg u la tions. Batteries should never be thrown away or in cin er at ed but dis posed of in ac cor dance with your local regulations con cern ing chemical wastes.

Table Of Contents

English

1 Before You Start

Fea tures.......................................................................................6

What’s in the box......................................................................7

Putting the batteries in the remote control........................7

Using the remote control .......................................................7

Discs compatible with this player.........................................8

DVD-Video regions...................................................................9

General information................................................................. 9

MP3 compatibility information.............................................9

WMA compatibility information............................................9

JPEG compatibility information.............................................9

DivX compatibility information............................................. 9

2 Connecting Up

Easy setup................................................................................10

Home theater video connections ....................................... 11

Home theater audio connections....................................... 12

3 Controls & Displays

Front panel............................................................................... 13

Remote control .......................................................................14

4 Getting Started

Playing discs ............................................................................ 15

Basic playback controls.........................................................15

Resuming playback from the last stopped point............. 15

Navigating DVD disc menus.................................................16

Navigating Video CD PBC menus .......................................16

5 Playing Discs

Introduction.............................................................................17

Preview function......................................................................17

Fast Forward/Fast Reversed..................................................19

Still Frame/Slow Play/Frame Advance Playback.............. 20

Using the page........................................................................21

Using the Repeat Play...........................................................21

Looping a section of a disc .................................................22

Using the Random (SHUFFLE) Play................................... 22

Switching Camera Angles..................................................... 23

Switching the Subtitle Language ....................................... 23

Switching the Audio Language ......................................... 24

Switching the audio channel............................................... 24

Switching Super Audio CD Playback layer....................... 24

Switching Super Audio CD Playback area........................ 24

Using the Zoom Function.................................................... 24

Play back Information........................................................... 25

Playing an MP3/DivX/JPEG/Windows Media™

Audio disc ............................................................................... 28

Playing a JPEG image ﬁ le (slide show) ..............................29

Playing MP3/WMA music and JPEG pictures

simultaneously........................................................................ 30

Playing a DivX disc.................................................................31

Using the Setup Menu ......................................................... 32

6 DVD Setup Menu

Setting up the GENERAL SETUP page.............................. 34

Setting up the AUDIO SETUP page.................................. 37

Setting up the VIDEO SETUP page................................... 42

Setting up the PREFERENCE page.....................................47

7 Additional Information

Language Codes .....................................................................51

Handling discs........................................................................ 52

Storing discs........................................................................... 52

Discs to avoid......................................................................... 52

Cleaning the pickup lens...................................................... 52

Problems with condensation............................................... 52

Hints on installation.............................................................. 53

Moving the player..................................................................53

Precautions on using the power cord ............................... 53

Tr oubleshooting..................................................................... 54

Speciﬁ cations ......................................................................... 57

Before You Start1

Features

An HDCP-compatible HDMI*1 terminal is provided for fully digital transmission that ensures the very highest picture and digital sound quality.

This unit comes with a High-Deﬁ nition Multimedia Interface (HDMI) jack; an extended DVI interface for next-generation televisions. This interface allows transfers of uncompressed digital video and digital audio (audio streams such as Dolby Digital and DTS as well as linear PCM) with a single connector. HDMI standard Ver. 1.1 compatibility means the unit can also transfer DVD-Audio multi-channel audio over HDMI.

End-to-end full-digital transfers with all digital processing allow the enjoyment of realistic video without any image degradation caused by AD/DA conversions. And the unit can up-convert 480p video signals to 720p, 1080i, and 1080p video output signals using the scaling function and the HDMI jack (see pages 11, 45).

High quality 12-bit/216 MHz Video D/A converter*

The unit uses a Video D/A converter that per forms D/A conversion of all video signals in 12-bits and can perform 8x oversampling to let you enjoy beautiful video possible with DVD. Furthermore, NSV technology sup press es noise during DA conversion.

DCDi *

DCDi (Directional Correction Deinterlacing) computes and tracks the angle of the screen edge to ﬁ ll in the missing pixels on the TV screen. DCDi signiﬁ cantly optimizes the image quality, especially during slow motion playback. This function is available only for progressive scan output.

Superlative audio performance with Super Audio CD, DVD-Audio, Dolby* Digital and DTS*

Logos:

The DV6001 delivers breathtaking sound quality with Super Audio CD, DVD-Audio, Dolby Digital and DTS discs.

DivX *

You can enjoy DivX® ﬁ les which are recorded on DVD±R/RW or CD-R/RW.

Plays DivX5.2, DivX4, DivX3 and DivX VOD Video content (see pages 28, 31 ).

• This player supports Quarter Pixel.

• This player supports GMC.

software

MP3 and WMA*7 compatibility

This player is compatible with CD-R, CDRW and CD-ROM discs that contain MP3 and WMA audio tracks (see pages 28, 30).

JPEG compatibility

This player is compatible with CD-R, CDRW and CD-ROM discs that contain JPEG data (see pages 28, 29, 30).

*1 HDMI, the HDMI logo and High-Deﬁ nition

Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

“NSV” is a registered trademark of Analog Device

Co. Ltd.

“DCDi” is a registered trademark of Faroudja, a

division of Genesis Microchip, Inc.

Manufactured under license from Dolby

Lab o ra to ries. “Dolby” “Pro Logic” and the double-D symbol are trademarks of Dolby

Lab o ra to ries.

“DTS” and “DTS Digital Surround” are registered

trade marks of DTS, Inc.

“DivX”, and “DivX Ultra” Certiﬁ ed, and associated

logos are trademarks of DivX, Inc. and are used under license.

Windows Media and the Windows logo are

trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other

countries.

High quality 24-bit/192 kHz DAC

The high speciﬁ cation 24-bit/192 kHz DAC delivers dynamic, smooth and expansive analog sound from CDs and DVDs.

1Before You Start

What’s in the box

Thank you for buying this MARANTZ prod uct. Please conﬁ rm that the following accessories are in the box when you open it.

• Remote control

• AAA/R03 dry cell batteries x2

• Audio/Video cable (yellow/red/white)

• System control cable

• Power cable

• User Guide (this manual)

• Warranty card

Putting the batteries in the remote control

1 Open the battery

compartment cover on

the back of the re mote

control.

2 Insert two AAA/R03

bat ter ies into the battery

compartment following

the indications (ª, ·)

inside the compartment.

Using the remote control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and the remote sensor on the unit.

• Use within the operating range and angle, as shown.

5m (16 feet)

• Remote operation may become unreliable if strong sunlight or ﬂ uorescent light is shining on the unit’s remote sensor.

• Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

• Re place the batteries when you no tice a fall off in the operating range of the remote control.

Note

• When using this player independently, set the

REMOTE CONTROL switch on the rear panel to INT. (INTERNAL) (see page 10).

English

3 Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please ob serve the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery together. Although they may look similar, different batteries may have different voltages.

• Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

• Remove batteries from equipment that isn’t going to be used for a month or more.

When disposing of used batteries, please comply with governmental regulations or environmental bylaws that apply in your country or area.

Before You Start1

Discs compatible with this player

Any disc that displays one of the following logos should play in this player. Other formats, including DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3/ DivX/WMA/JPEG ﬁ les) and Photo CD will not play.

DVD-Video compatibility:

• Logos:

• Single-sided or double-sided discs

• Single layer or dual layer discs

• Dolby Digital, DTS, MPEG or Linear PCM digital audio

• MPEG-2 digital video

Discs are generally divided into one or more titles. Titles may be further subdivided into chapters.

DVD-Audio compatibility:

• Logos:

• Single sided discs

• Single layer or dual layer discs

• Linear or packed PCM digital audio

• Some discs may contain MPEG-2 video, and Dolby Digital, DTS or MPEG digital audio

Discs are generally divided into one or more groups. Groups may be further subdivided into tracks.

DVD-R compatibility:

This unit can play DVD-R discs. Please note the fol low ing points when using these discs:

• Logo:

• This unit can play DVD-R discs recorded as DVDVideo format.

DVD-RW compatibility:

This unit can play DVD-RW discs. Please note the fol low ing points when using these discs:

• Logo:

• This unit can play DVD-RW discs recorded as DVD-Video format, and DVD-VR format.

• DVD-RW discs that were recorded with copyonce only permission can be played.

Super Audio CD compatibility:

• Logo:

• Single layer, dual layer or Hybrid layer

• 12cm (5in.) or 8cm (3in.) discs

• Digital audio (DSD)

Super Audio CDs are divided into tracks.

Audio CD compatibility:

• Logos:

• 12cm (5in.) or 8cm (3in.) discs

• Linear PCM digital audio

• Audio CD, CD-R* and CD-RW* formats

CDs are divided into tracks.

*This unit can play CD-R and CD-RW discs recorded in Audio CD or Video CD format, or with MP3 audio ﬁ les or Windows Media audio ﬁ les or picture ﬁ les or DivX ﬁ les.

*Some copy-controlled CDs may not conform to ofﬁ cial CD standards. They are special discs and may not play on the DV6001.

*The DV6001 does not support the non-DVD side of a Dual Disc.

Video CD compatibility:

• Logo:

• 12cm (5in.) or 8cm (3in.) discs

• MPEG-1 digital audio

• MPEG-1 digital video

Video CDs are divided into tracks.

Super VCD compatibility:

• Logo:

• 12cm (5in.) or 8cm (3in.) discs

• MPEG-1 digital audio

• MPEG-2 digital video

Super VCDs are divided into tracks.

DVD+R/+RW compatibility:

• Logo:

• This unit can play DVD+R/+RW discs. Please note the followings points when using these discs.

1Before You Start

DVD-Video regions

All DVD-Video discs carry a region mark on the case somewhere that indicates

which region(s) of the world the disc is com pat i ble with. Your DVD player also has a region mark, which you can ﬁ nd on the rear panel. Discs from incompatible regions will not play in this player. Discs marked

ALL will play in any player.

General information

• This player can recognize in total about 650 ﬁ les per folders and 300 folder per disc for MP3/ DivX/WMA.

• When writing MP3/WMA/JPEG/DivX ﬁ les to CDR/RW discs, always be sure to set the writing format to ISO 9660 Level 1.

• For MP3 and WMA ﬁ les recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time.

MP3 compatibility information

• Files should be MPEG1 Audio Layer 3 format. The sampling rate is 8 kHz to 48 kHz, but it is depends on the bit rate. Incompatible ﬁ les will not play.

• Audio encoded at 128 kbps should sound close to regular audio CD quality. Although this player will play 32 kbps to 320 kbps, but it is depends on the sampling rate.

• This player is compatible with ID3 ver.1.1 Tag. But the information display on the display on the Front panel and TV screen is only ID3 ver. 1.0 Tag.

• Maximum 30 characters can be displayed on the display on the Front panel and TV screen.

• This player cannot play DVD-R/RW discs with recorded MP3 music data.

• This player only plays tracks that are named containing the ﬁ le extension “.mp3” or “.MP3”.

• This player is not compatible with multi-session discs. If you try and play a multi-session disc, only the ﬁ rst session will be played.

WMA compatibility information

• The sampling rate is 44.1 kHz (bit rate: 64 kbps-192 kbps) and 48 kHz (bit rate: 128 kbps-192 kbps).

• This player only plays tracks that are named with the ﬁ le extension “.wma” or “.WMA”.

• This player can not play the disc contents protected by Windows Media Digital Right Management (DRM).

JPEG compatibility information

• While this player is designed to be able to handle image data recorded in JPEG format, no assurances are given that the player will be able to display image data recorded in all JPEG formats.

• This player can not display progressive JPEG images.

• This player can not display HD JPEG images.

• Always be sure to specify a ﬁ le extension of “.JPG” or “JPEG” for JPEG ﬁ les. The ﬁ le will not be able to be displayed if a ﬁ le extension other than “.JPG” or “JPEG” is speciﬁ ed or if no ﬁ le extension is assigned to the ﬁ le. (Note that this means that JPEG ﬁ les created on a Macintosh will not be able to be displayed as is.)

• Depending on the ﬁ le size and compression ratio, some JPEG pictures cannot be displayed correctly.

DivX compatibility information

• A ﬁ le with an extension of “.avi” or “.divx” is called a DivX ﬁ le.

• Maximum 30 characters can be displayed on the display on the Front panel and TV screen.

• Maximum 4 Gbyte of ﬁ le size can be displayed.

• File should be MPEG1 Audio Layer 3 format and MPEG2 format.

Caution!

• DVD±R/RW and CD-R/RW discs recorded using a per son al computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed in for ma tion.)

• There may be times when it is impossible to replay a CD-R/RW disc because of the characteristics of the disc being used or because of dirt or scratches on the disc.

• Unﬁ nalized DVD-R/RW discs cannot be played.

• Unﬁ nalized CD-R/RW discs cannot be played.

• For more information on using DVD-R/RW and CD-R/RW discs, see “Handling discs” on page

52.

• Never try to replay anything other than a music CD (CDA format) or a CD-R/RW on which MP3 and/or JPEG ﬁ les have been stored. Depending on the type of ﬁ le, there may be times when doing so will result in problems or erroneous operation.

English

Connecting Up2

Easy setup

This easy setup is the minimum set of connections you need to start watching DVD-Video discs. Both sound and picture are fed directly to your TV using the sup plied audio/video cables. For other possible con nec tions, see pages 11 and 12 .

Connect to a pair of stereo

audio inputs on your TV using the sup plied Audio/Video cable. You can connect a subwoofer to the SUBWOOFER Jack.

Ver1.1

HDMI

FRONT

CENTER

SUB W.

Connect to a composite video

input on your TV using the supplied Audio/Video cable.

AUDIO OUT

OPT.

SURR.

MIXED 2CH

Important

• Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

RS-232C terminal/ FLASHER IN

Control terminal for use by custom installers.

INT.

COAX.

COMPONENT

VIDEO

A/V EUROCONNECTOR

EXT.

FLASHER IN

RS-232C

REMOTE CONTROL

OUT

AC IN

See Note:

Remote Switch

EXT.

INT.

Connecting audio/video cables

Be sure to insert each plug fully for the best con nec tion. The plugs and jacks are color-cod ed to make con nec tion easier.

Connecting system control cables

By connecting this DVD player to another Marantz audio component using a supplied system control cable, you can remotely operate the components as a single system.

• When con nect ing to a com po nent with a

remote sensor, be sure to connect the REMOTE CON TROL IN jack of this DVD player to the REMOTE CON TROL OUT jack of the com po nent with the remote sensor.

• When connecting to component which is not equipped with a remote sensor, be sure to connect the com po nent to the REMOTE CONTROL OUT jack of this DVD player.

Plug into a standard

AC wall outlet.

Note

• When connecting to a standard TV, select

4:3 LETTER BOX or 4:3 PAN SCAN in the TV Aspect setting (see page 43).

• Connect the video output of the player directly to your TV. Because the player is de signed to support an Analog Protection System copy card, there are cases when proper playback will be not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.

• The player’s video output and S1 output are not be progressive.

•

Remote switch

When using this DVD player independently, set

this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL).

•

Flasher Input

This is used when controlling components

from different rooms with a keypad or other input device. Set the remote switch to EXT.

(EX TER NAL) when using a ﬂ asher input.

2Connecting Up

Home theater video con nec tions

This player outputs video in a number of different ways. Choose the one most suit able for your system using the guide below.

If your TV has a component video input, we

rec om mend using it to connect directly to the COM PO NENT VIDEO OUT of this player. Use the standard 3-jack component video output.

CENTER

Ver1.1

HDMI

SUB W.

FRONT

If your TV and projector have

a HDMI terminal for Video and Audio Input, we recommend using it to connect directly to the HDMI out of this player.

Important

• Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be dam aged.

If your TV has a SCART input, we rec om mend using it to connect directly to the A/V EURO CONNECTOR on this player. (for Europe only)

AUDIO OUT

OPT.

SURR.

MIXED 2CH

If a component input is not available to you, connect this player to your TV or AV receiver using either the VIDEO or S1 jacks.

COAX.

COMPONENT

VIDEO

A/V EUROCONNECTOR

INT.

EXT.

FLASHER IN

RS-232C

REMOTE CONTROL

Plug into a standard

AC wall outlet.

English

OUT

AC IN

Connecting SCART (for Europe only) and S-Video cables

SCART and S-Video cables will only plug in one way, so make sure the plug is correctly lined up with the jack before inserting. Be sure to fully insert for a good con nec tion.

Note

• The A/V EURO CONNECTOR can output

com pos ite or RGB component video. If you connect just one TV, use the A/V EURO CONNECTOR. You can select the type of video output by changing the COMPONENT setting in the DVD Setup Menu (page 46).

S-Video or composite video?

S-Video should give a better picture, so if you have an S-Video input, use it. S-Video cables are available from any good audio/ visual dealer.

Connecting HDMI cables

With an HDMI cable, both uncompressed video data and digital audio data (e.g., LPCM or bit stream data such as Dolby Digital, DTS, MPEG data or DVD Audio Multi channel) can be trans mit ted with just a single connector.

By transmitting DVD image data directly as digital data without it being ﬁ rst converted into analog format, it becomes possible to provide the very ﬁ nest in image quality (see

pages 6, 39, 40, 45).

Note

• The HDMI output of this unit can be con nect ed to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-com pat i ble DVI input.

• There may be no image output if con nect ed to a TV or display that is not com pat i ble with the above format.

• Refer to the instruction manual of the TV or display to be connected to this unit for detailed information regarding the HDMI terminal.

• When connecting a progressive input TV with the component output of the player, select ON in the Progressive setting (see page 43).

Connecting Up2

Home theater audio connections

This player outputs multi-channel audio in digital form. Check the manual for your ampliﬁ er/receiver to see what equipment it is com pat i ble with (especially which digital formats such as Dolby Digital, DTS, etc. It can decode).

If your ampliﬁ er has 5.1 channel analog

inputs, connect them here. Connect to the L (left)/R (right), SURR.L/.R (SURROUND L/R), CENTER and SUB WOOFER inputs of your ampliﬁ er.

CENTER

FRONT

SUB W.

AUDIO OUT

SURR.

Ver1.1

HDMI

Connect to the coaxial or

optical input of your ampliﬁ er if it has digital inputs.

OPT.

MIXED 2CH

COAX.

COMPONENT

Important

• Before making or changing any rear panel connections, make sure that all com po nents are switched off and unplugged from the wall outlet.

• While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

If your ampliﬁ er has stereo inputs

only, connect them here. You can connect a subwoofer to the SUBWOOFER Jack.

INT.

VIDEO

A/V EUROCONNECTOR

EXT.

FLASHER IN

Plug into a standard

AC wall outlet.

RS-232C

REMOTE CONTROL

OUT

AC IN

Connecting analog audio cables

Be sure to fully insert each plug for the best con nec tion. The plugs and jacks are color-coded to make con nec tion easier.

Connecting coaxial cables

Use an interconnector with a pin-type (also called RCA or phono) plug on each end to connect up digital coaxialtype jacks. Make sure that the plug is pushed fully home.

Connecting optical cables

Optical interconnects only plug in one way, so make sure the plug is correctly lined up with the jack before in sert ion. When in sert ing the plug,

COAX

OPT

the pro tec tive shutter will open and you should hear it click into po si tion when fully in sert ed. Be careful that you do not force the plug, because this could result in dam age to the protective shutter, the cable, or the unit itself.

Note

• If you listen to mul ti chan nel DVD-Audio through one of the digital outputs, it will be downmixed to stereo. Also, high sampling rate DVD-Audio (192 kHz or 176.4 kHz) will be downsampled to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz, depending on the disc. Multi channel and high sampling rate DVD-Audio are only available through the analog outputs.

• All DVD-Audio and all Super Audio CD audio are output only through the analog outputs. (see

page 38)

3Controls & Displays

~!@

Front panel

SUPER AUDIO CD/DVD PLAYER DV6001

STANDBY

POWER

ON/STANDBY

1 STANDBY indicator

• Lights when the unit is in standby.

2 Disc tray

• Place the disc here.

3 SA-CD indicator

• Lights when the player detects a Super Audio CD signal.

4 DVD-AUDIO indicator

• Lights when the player detects a DVD-AUDIO signal.

5 MULTI-CH indicator

• Lights when playing a multi-channel audio source.

6 AUDIO EX

• Lights when the AUDIO EX is activated using the AUDIO EX button on the remote control.

• The sound quality of analog audio output is

improved by turning off analog video signal output and the front panel display.

• It is applied to CDDA, Super Audio CD, DVD Audio and DTS CD in Play mode.

7 HDMI – page 45

• The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.

• Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is dis played allows you to select the resolution in the se quence below:

480p Æ 576p Æ 720p Æ 1080i Æ 1080p Æ

480p

DVD-

SA-CD

MULTICHAUDIO

AUDIO

EX.

8 HDMI indicator

• When the connected device is HDMI/DVI compatible, the light ﬂ ashes red.

9 3 (PLAY)

• Begins playing the disc play.

10 7 (STOP)

• Stops playing the disc play.

11 8 (PAUSE)

• Pauses playing the disc play.

12 POWER ON/STANDBY

• Press to turn the power on, and press it again to enter STANDBY mode.

13 Display

• Operation indications are displayed here.

14 0 (OPEN/CLOSE)

• Press to open and close the disc tray.

15 4/

16 ¡/

• Press to skip reverse title/group, chapter, or track. Yo u can also press and hold this button for Fast Reversed.

• Press to skip forward title/group, chapter, or track. You can also press and hold this button for Fast Forward.

English

HDMI

PLAY

OPEN/CLOSE

PAUSE

STOP

Controls & Displays3

Remote control

2 3 4

9 0

1 AUDIO EX – Press to turn AUDIO EX off

and on

• The sound quality of analog audio output is

improved by turning off analog video signal output and the front panel display.

• HDMI video output cannot be switched off.

2 OPEN/CLOSE – Disc tray open/close –

page 15 3 ZOOM – pages 24, 29 4 HDMI – page 45

• The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.

480p Æ 576p Æ 720p Æ 1080i Æ 10 8 0 p Æ

480p

! @

% ^

* ( ) _

™

5 REPEAT – pages 21, 28 A–B – page 22 6 ANGLE – pages 23, 29 7 INPUT (%/ﬁ) button – These buttons

can switch between devices compatible with MARANTZ receivers. Refer to the receiver instruction manual for further details.

•

Applicable models: PM-11S1, PM-15S1, PM6001, PM7001, PM8001, SR9600. (These models may not be handled depending on the area.)

Non-applicable models: MARANTZ Ampliﬁ ers

and receivers which had released before 2006, including PM-14, PM-17 and PM4001 except above models.

8 4 (PREV.)/¢ (NEXT)– Skip – pages

15, 16, 18, 19, 28, 29, 49

•

Allows you to search forward/backward through a disc. Use to skip the title, chapter or track.

Press and hold (4) for Fast Reversed.

•

Press and hold (¢) for Fast Forward.

•

9 SCAN – pages 17, 18 10 TOP MENU (TOP-M)/RETURN – page 16 11 Cursor (2/3/5/∞) / ENTER button 12 DISPLAY (DISP.) – page 25 13 DISC SKIP – It is not used on this set. 14 POWER – Switches the player on or into

standby – page 15

15 SOUND MODE– Selects Audio out mode

and change the Super Audio CD Play back area – pages 24, 37

16 PA GE – Turns the pages of DVD-Audio still

pictures – page 21

17 RANDOM – page 22 18 A UD I O – Changes the Hybrid Super Audio

CD Play back layer – page 24 19 SUBTITLE – pages 23, 31 20 VOLUME (5/∞) button –

These buttons can adjust the volume of devices compatible with MARANTZ receivers. Refer to the receiver instruction manual for further details.

21 MUTE button – This button can activate

the mute function of devices compatible with MARANTZ

receivers. Refer to the receiver

instructions for further details.

22 3 (PLAY) – pages 15, 19, 20, 28, 30, 31 23 8 (PAUSE) – pages 15, 20 24 7 (STOP) – pages 15, 29, 30, 32, 47 25 MENU – pages 16, 18, 23 26 SETUP – pages 32, 34, 37, 42, 47

27 Number buttons

Note

• HDMI ON is set when the unit is shipped from

the factory.

• Set HDMI under the DVD Setup Menu to use

HDMI functions (see pages 39, 40, 45).

Getting Started

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down).

Press 3 (PLAY) to start playback.

If you are playing a DVD or Video CD, a menu may appear (see page 16).

Note

•

For one-sided, two-layer discs containing movies, etc., there may be a short image stoppage at the point where the layers change. This is not a malfunction.

•

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Basic playback controls

Button What it does

Starts playback.

Stops playback.

• Skips to the next track or chapter.

Numbers

ENTER Select the current menu option.

In title menu, it functions as the Enter key.

Pauses a disc that’s playing. Each time the button is pressed, a new frame will appear.

Skips to the start of the current track or

•

chapter, then to previous tracks/chapters.

Press and hold for Fast Reversed.

•

Press and hold for Fast Forward.

•

Playback starts from the selected track/ chapter number.

English

Playing discs

The basic playback controls for playing discs are cov ered here. Further func tions are detailed in the next chapter.

1 Press the POWER ON/STANDBY button

2 Press OPEN/CLOSE to open the disc tray.

Note

•

Throughout this manual, the term “DVD” means DVD-Video, and DVD±R/RW. If a function is speciﬁ c to a par tic u lar kind of DVD disc, it is speciﬁ ed.

on the front panel or POWER button on

the remote control.

If you are playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input.

Resuming playback from the last stopped point

This DVD system is able to resume disc

playback from its last stopped point (only possible for the last 10 discs that were recorded without a menu).

1 Load one of the last 10 discs played.

While “LOADING” appears on the display

start playback from

panel, press PLAY

the last stop point.

To cancel the resume mode

•

Press 7 twice.

Important

While using the DVD playback controls, you may see the mark displayed on-screen. The mark means that the operation is not allowed by the player and disc.

Getting Started4

Navigating DVD disc menus

Many DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or TOP-M.

Note

• Some DVD-Audio discs feature a “Bonus Group”. To access this group you have to input a password that you can ﬁ nd on the disc’s packaging (see page 34).

Button What it does

TOP- M Displays the “top menu” of a DVD disc. This

varies with the disc.

MENU Displays a DVD disc menu—this varies with

the disc and may be the same as the “top menu”.

RETURN Returns to the previously displayed menu

screen.

Cursor Moves the cursor around the screen.

(2/3/5/∞)

ENTER Selects the current menu option.

Numbers Selects a numbered menu option

(some discs only).

Navigating Video CD PBC menus

Some Video CDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus.

Press the MENU to turn the PBC function on or off.

Note

• Some discs don’t allow PBC menus.

Button What it does

RETURN Displays the PBC menu.

Numbers Selects a numbered menu option.

ENTER Selects the current menu option.

Displays the previous menu page

Displays the next menu page

(if there is one).

Playing Discs

Introduction

• Many of the functions covered in this chapter apply to DVD discs, Video CDs and CDs, although the exact operation of some varies slightly with the kind of disc loaded.

• When playing DVD discs, if the icon appears on-screen when you try to use a particular function, either the player or the disc doesn’t allow the use of that function.

• When playing Video CDs, some of the functions are not available in PBC mode. If you want to use them, press the

MENU to turn the PBC function off (see page 16).

Preview function

Video-CD SVCD DVD-Video CD

1 Press SCAN.

SVCD VCD

SELECT DIGEST TYPE

TRACK DIGEST

DISC INTERVAL TRACK INTERVAL

DVD

SELECT DIGEST TYPE

TITLE DIGEST

TITLE INTERVAL

SELECT DIGEST TYPE

GROUP DIGEST

TRACK DIGEST GROUP INTERVAL TRACK INTERVAL

2 Use the 5/∞ keys to select one of the

following options and press ENTER.

This option is only available during playback mode.

• TRACK/TITLE/CHAPTER DIGEST – View six

different TRACK/TITLE/CHAPTER on one screen each time. This allows you to have a quick glance at all the TRACK/TITLE/CHAPTER on the disc.

• DISC INTERVAL – View the whole disc in six

thumbnail pictures. It divides a disc into six portions at regular intervals and displays them on one screen.

• TRACK INTERVAL – View the content of a single

track in six thumbnail pictures. It divides a single track into six portions at regular intervals and displays them on one screen.

• TITLE INTERVAL/CHAPTER INTERVAL – View

the content of a single TITLE/single CHAPTER in six thumbnail pictures. It divides a single TITLE/ CHAPTER into six portions at regular intervals and displays them on one screen.

• GROUP/TRACK DIGEST – GROUP/TRACK

DIGEST will playback the ﬁ rst 3 to 4 seconds of every title/chapter available in the disc/current title.

English

Playing Discs5

• GROUP/TRACK INTERVAL – GROUP/TRACK

INTERVAL will divide the current title disc/chapter time by 6 and playback the ﬁ rst 3 to 4 seconds of each of these intervals.

• Use (2/3/5/∞) to select a track or use

the numeric buttons to enter the selected track number.

• To go to the previous or next page, press

4/¢

• Press ENTER on the selected thumbnail

picture to start playback from there.

• To return to the main menu, select MENU on the screen and press ENTER.

3 To exit the preview menu, select EXIT on

the screen and press ENTER.

For C D

• At stop mode, press SCAN on the remote control. Each track will be played for a few seconds.

Note

• Yo u can select “Track Interval” only during playback with PBC off.

• Some discs don’t allow the Scan mode.

+ 40 hidden pages