Mallory Ulisses User Manual

Ferro
a vapour

Steam
Iron

Manual.indd 1Manual.indd 1 10/11/2007 2:03:18 PM10/11/2007 2:03:18 PM

A

B

F

C

E

D

Fig. 1 Fig. 2 Fig. 3

Manual.indd 2Manual.indd 2 10/11/2007 2:03:18 PM10/11/2007 2:03:18 PM

Steam iron
Ulisses

Dear customer,

Many thanks for choosing to purchase a Mallory brand product. Thanks to its
technology, design and operation and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long product life can be assured.

Description

A Temperature gauge
B Filling hole
C Base
D Pilot light
E Reservoir water level visor
F Dry / steam ironing button

Safety advice and CAUTIONs

- Read these instructions carefully before switching on the appliance and keep
them for future reference. Failure to follow and observe these instructions could
lead to an accident.

Electrical safety:

- Do not use the appliance if the cable or plug is damaged.

- Ensure that the voltage indicated on the nameplate matches the mains voltage
before plugging in the appliance.

- Connect the appliance to a base with an earth socket withstanding a minimum
of 10 amperes.

- The appliance’s plug must fi t into the mains socket properly. Do not alter the
plug. Do not use plug adaptors.

- Do not use the appliance if it has fallen on the fl oor, if there are visible signs of
damage or if it has a leak.

- Do not force the electrical connection wire. Never use the electric wire to lift
up, carry or unplug the appliance.

- Do not wrap the power cord around the appliance.

- Do not allow the connection cable to come into contact with the appliance’s
hot surfaces.

- Check the state of the electrical connection cable. Damaged or tangled cables
increase the risk of electric shock.

- Do not touch the plug with wet hands.

English

Manual.indd 3Manual.indd 3 10/11/2007 2:03:18 PM10/11/2007 2:03:18 PM

Personal safety:

- Do not touch metal parts when it is operating, as it may cause serious burns.

Use and care:

- Fully unroll the appliance’s power cable before each use.

- Respect the MAX indicator.

- Disconnect the appliance from the mains when not in use and before under­taking any cleaning task.

- This appliance is for household use only, not professional or industrial use.

- This appliance is intended for adult use. Ensure that this product is not used
by the disabled, children or people unused to its handling.

- This appliance should be stored out of reach of children and/or the disabled.

- Do not put the appliance away if it is still hot.

- Only use water with the appliance.

- It is advisable to use distilled water, especially if the water in your area con­tains clay or if it is “hard” (containing lime or magnesium).

- Turn the thermostat control to the minimum (MIN) setting. This does not mean
that the iron is switched off permanently.

- Do not use the appliance on any part of the body of a person or animal.

- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer’s liability null and void.

Instructions for use

Before use:

- Make sure that all the product’s packaging has been removed.

Fill with water (Fig 1):

- It is essential to have fi lled the deposit with water to be able to work with
steam.

- Open the lid of the fi lling mouth.

- Fill the compartment with cold water.

- Fill the deposit taking care to observe the MAX level.

- Close the lid of the fi lling entrance.

Use:

- Unroll the cable completely before plugging it in.

- Connect the appliance to the mains.

- The pilot light (D) will come on.

- Turn the thermostat control to the desired temperature position.

- Do not use temperatures higher than those indicated on the garments to be
treated.

* Temperature for synthetic fi bres.
** Temperature for silk and wool.
*** Temperature for cotton (minimum temperature for ironing with steam).
Max Temperature for linen.

- Wait until the pilot light (D) has gone out which will indicate that the appliance
has reached an adequate temperature.

- During use of the appliance, the pilot light (D) will come on and off automati­cally, indicating the heating elements are working, and therefore maintaining the
desired temperature.

Manual.indd 4Manual.indd 4 10/11/2007 2:03:18 PM10/11/2007 2:03:18 PM