Makita KP0810 User Manual
3-1/4"
PLANER
PLANES UP TO 3-1/4'' WIDE AND 5/32'' DEEP IN A SINGLE PASS
PLANES UP TO 3-1/4'' WIDE AND 5/32'' DEEP IN A SINGLE PASS
Powerful Yet Lightweight (7.5 AMP Motor, 7.2 lbs.)
Powerful Yet Lightweight (7.5 AMP Motor, 7.2 lbs.)
2-Blade Cutter Head for Fast Stock Removal; 16,000 RPM
2-Blade Cutter Head for Fast Stock Removal; 16,000 RPM
Chip Ejection Can Be Directed to Either Side of the Tool for Convenience
Chip Ejection Can Be Directed to Either Side of the Tool for Convenience
Conveniently Located Lock-On/Off Button can be Operated from
Conveniently Located Lock-On/Off Button can be Operated from
Either Side of Handle
Either Side of Handle
Depth Adjust Knob Features an Easy to Read Scale with Click Stops in 0.1 mm
Depth Adjust Knob Features an Easy to Read Scale with Click Stops in 0.1 mm
Increments for Precision Planing
Increments for Precision Planing
COMFORT
COMFORT
Left or right chip ejection
for operator comfort
and convenience
PRECISION
PRECISION
Easy to read scale
and click stops for precise
depth adjustment
CONVENIENCE
CONVENIENCE
Lock-on/off button
can be operated from
either side of handle
DURABILITY
DURABILITY
Model
Model
KP0810
KP0810
Planer blade drum is held
by rigid die-cast
aluminum housing bracket
LIGHTWEIGHT. USER FRIENDLY.
makitatools.com
3-1/4'' PLANER
Model KP0810
FEATURES & BENEFITS
FEATURES & BENEFITS
■ Planes up to 3-1/4" wide and 5/32" deep in a single pass
■ Powerful yet lightweight (7.5 AMP motor, 7.2 lbs.)
■ 2-Blade cutter head for fast stock removal; 16,000 RPM
■ Chip ejection can be directed to either side of the tool for
convenience
■ Conveniently located lock-on/off button can be operated from
either side of handle
■ Depth adjust knob features an easy to read scale with click
stops in 0.1mm increments for precision planing
■ Ergonomically designed rubberized handle and depth
adjustment knob for comfort and control
■ Front base features 3 chamfering groove options;
approximately 1.4mm, 3mm and,4mm
■ Rigid die-cast aluminum housing supports planer drum for
increased durability
■ Foot on planer base elevates the base protecting the
workpiece and planer blades from damage
BASE FOOT
BASE FOOT
Protects the workpiece and
planer blades from damage when
placing the planer down
CHAMFERING
CHAMFERING
About
About
3mm
1.4mm
About
Built-in grooves on planer base
for easy chamfering of
workpiece edge
SHIPLAPPING
SHIPLAPPING
Shiplapping capacity
up to 1"
4mm
STANDARD EQUIPMENT
STANDARD EQUIPMENT
■ Blade gauge assembly (123062-2)
■ Socket wrench (782209-3)
■ Guide rule (122785-9)
■ Depth guide (342390-8)
■ Double edged tungsten-carbide planer blade set (D-16966)
SPECIFICATIONS
SPECIFICATIONS
Planning width 3-1/4''
Planning depth 5/32''
No load speed 16,000 RPM
AMPS (120V) 7.5
Overall length 11-3/8''
Net weight 7.2 lbs.
Master carton 3
UPC 088381-079501
OPTIONAL ACCESORIES
OPTIONAL ACCESORIES
■ Blade gauge assembly (123062-2)
■ Socket wrench (782209-3)
■ Guide rule (122785-9)
■ Depth guide (342390-8)
■ Double edged tungsten-carbide planer blade set (D-16966)
■ Double edged tungsten-carbide planer blade set
with set plates (D-17239)
Model KP0810
Makita offers a wide variety of accessories for Planers. For a complete listing, please refer to
the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0208 4M MA-0115-08. For more information,call 1-800-4MAKITA or visit
makitatools.com
Makita U.S.A., 14930 Northam St.,La Mirada, CA 90638
Loading...