Makita DJV181RTJ User manual
GB Cordless Jig Saw Instruction manual
F Scie sauteuse sans fil Manuel d’instructions
D Akku-Stichsäge Betriebsanleitung
I Sega da traforo a batteria Istruzioni per l’uso
NL Accudecoupeerzaag Gebruiksaanwijzing
E Sierra Caladora Inalámbrica Manual de instrucciones
P Serra Tico-Tico a Bateria Manual de instruções
DK Ledningsfri stiksav Brugsanvisning
GR Σέγα μπαταρίας Οδηγίες χρήσης
TR Akülü Dekupaj Testere Kullanım kılavuzu
DJV141
DJV181
013927
1 013928 2 012128
1
2
3
4
5
6
7
8
9
10
11
12
13
3 013870 4 013871
5 013945 6 013933
7 013992
2
8 013929 9 013930
14
15
16
17
15
15
18
19
15
20
19
21
22
15
10 013876 11 013877
12 013878 13 013879
14 013931 15 013932
3
16 013934 17 013884
15
16
23
24
15
23
25
26
27
15
16
23
28
29
18 013935 19 013886
20 013887 21 013936
22 013937 23 013938
4
24 013939 25 013940
16
23
30
30
31
32
23
33
34
35
36
26 013941 27 013942
28 013943 29 013944
5
ENGLISH (Original instructions)
Explanation of general view
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Cutting action changing lever
6. Lock switch
7. ON/standby switch
8. Lock-off
9. ON
10. Standby
11. Speed adjusting dial
12. Fixed position
13. Released position
14. Jig saw blade
15. Base
16. Hex wrench
17. Cover plate
18. Anti-splintering device
19. Dust nozzle
20. Clamp screw
21. Hose for vacuum cleaner
22. Cutting line
23. Bolt
24. Bevel slot
25. Graduations
26. V-notch
27. Gear housing
28. Starting hole
29. Rip fence
30. Fence guide
31. Threaded knob
32. Circular guide pin
33. Ruler bar
34. Guide rail adapter
35. Screw
36. Guide rail
SPECIFICATIONS
Model DJV141 DJV181
Length of stroke 26 mm 26 mm
Wood 135 mm 135 mm
Max. cutting capacities
Strokes per minute (min
Overall length 280 mm 298 mm
Net weight 2.4 kg 2.5 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS JIG SAW SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
Mild steel 10 mm 10 mm
Aluminum 20 mm 20 mm
-1
) 800 - 3,500 800 - 3,500
ENE019-1
GEB045-2
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it
unstable and may lead to loss of control.
3. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade will not
strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
only when hand-held.
11. Always switch off and wait for the blade to come
to a complete stop before removing the blade from
the workpiece.
12. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
13. Do not operate the tool at no-load unnecessarily.
14. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
6
Loading...