Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Standby power (W)
DC 7.2 - 18
DC 9.0
2.0 (6.5)
0.75 (1.65)
110-120 50/60 240
Models No.
Description
PRODUCT
Current (A)
CONCEPT AND MAIN APPLICATIONS
Specification
Optional accessories
P 1/ 5
DC18RC
Charger
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 156 (6-1/8)
190 (7-1/2)
84 (3-5/16)
220-240 50/60 240
0.4
0.8
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
Output voltage: V
ADP03 Automatic Refreshing Adapter,
ADP04 Interchangeable Adapter
Output current: A
Li-ion
BL1815
CellCharging time Voltage:VCapacity:Ah Battery
Approx. 15 min.
Approx. 20 min.
Approx. 22 min.
Approx. 30 min.
Approx. 45 min.
Approx. 60 min.
Approx. 70 min.
18
9.6
1.3
BL1430, BL1430A
14.4
3.0
Li-ion
Ni-MH
Ni-MH
BH142014.4
BH9020, BH9020A
2.0
2.0
14.4
BH14272.7
7.2 - 18
Ni-Cd*2
2.6
12
Ni-MH
3.3
BH1233, BH1233C
Note: The charging time depends to a large extent on battery's temperature or room temperature.
*2: use with interchangeable adapter ADP04 (optional accessory).
Model DC18RC is a new developed compact size fast charger
with the equivalent functions as current model DC18RA.
Its brief benefits are:
1) Only 22 minutes to fully charge of 3.0Ah Li-ion battery
2) Innovative computer controlled charging system provides
optimum charge to each battery through the digital
communication between charger and battery
3) Cooling fan to keep the battery temperature low
for minimum charging time
4) The adapter ADP04 (optional accessory) enables to charge
the existing Ni-Cd and Ni-MH batteries
5) The adapter ADP03 (optional accessory) enables to refresh
inactive batteries
6) Selectable melody sound of completed charging
W
L
H
9.6 BH9033, BH9033A3.3Ni-MH
Ni-MH*2
Ni-MH*2
7.2 - 18 All 1.3Ah Ni-Cd batteries except maktec series
All 2.0Ah Ni-Cd batteries
All 2.6Ah Ni-MH stick/ pod batteries
9.6 - 183.0 All 3.0Ah Ni-MH stick/ pod batteries
1.3
7.2 - 182.0
Ni-Cd*2
Double insulation*1
*1: excludes some countries
Protection against electric shock
T
ECHNICAL INFORMATION
14.4
BL1415
12 BH1220, BH1222C
14.4
BH1433
BL183018
P 2/ 5
Repair
CAUTION: • Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
• Due to the difference of factories, the shapes and positions of actual parts are different
from those shown in the following drawings.
[1] DISASSEMBLING / ASSEMBLING
[1]-1. Charger case and Terminal unit
DISASSEMBLING
ASSEMBLING
Cap 13 (4pcs.)
Remove Charger case and Terminal unit as drawn in Fig. 1.
1. Remove four Caps 13 and Tapping screws.
Charger case is separated from Charger case
cover.
2. Remove the connectors of Terminal unit from CN1 (connector 1)
and CN2 (connector 2) of Charging circuit. Then remove
Compression spring 4 from the boss of Terminal unit.
Tapping screw
(4pcs.)
Charger case
(1) Set Compression spring 4 to Terminal unit. Refer to Fig. 1.
(2) Assemble Terminal unit as drawn in Fig. 2.
(3) Assemble Charger case to Charger case cover by fastening four Tapping screws. Do not pinch the lead wires.
(4) Insert four Caps 13 into the holes of Charger case cover.
Fig. 1
Fig. 2
CN 1
Charger case cover
CN 2
Charging circuit
Boss of Terminal unit
Terminal unit
Compression spring 4
1. Pass the connectors of Terminal unit through
the notch and the hook of Terminal base.
2. Put the three legs of Terminal unit and
the end of Compression spring 4 into each hole
of Terminal base.
3. Connect the connectors with Circuit board. (Fig. 1.)
CN 1
Notch and hook of Terminal base
CN 2
Charging circuit
Legs of Terminal unit (3pcs.)
Compression spring 4
Loading...