Makita BML 185, BML145 User Manual
GB Rechargeable Flashlight Instruction manual
F Lampe torche Manuel d'instructions
E Linterna recargable Manual de instrucciones
BML145/BML185
3
2
1
4
12
5
6
34
7
5
2
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning be-fore use.
Symboles
Les symboles utilisés pour l’appareil sont indiqués ci-dessous. Assurez-vous d’avoir bien compris leur signification avant
l’utilisation.
Símbolos
Se utilizan los siguientes símbolos para el equipo. Asegúrese de que comprende su significado antes del uso.
❏ Read instruction manual.
❏ Veuillez lire le manuel d’instructions.
❏ Lea el manual de instrucciones.
❏ Do not touch the bulb which is hot in use or immediately after putting on light. You may get burnt.
❏ Évitez de toucher l’ampoule lorsque la lampe est allumée. Vous risqueriez de vous brûler.
❏ No toque la bombilla, que está muy caliente, mientras la utiliza o inmediatamente después de encender la
luz. Puede sufrir quemaduras.
3
ENGLISH
Explanation of general view
1. Battery cartridge
2. Button
3. Red part
4. Switch
5. Ring
6. Bulb
7. Shoulder strap
SPECIFICATIONS
Model BML145 BML185
Bulb 12 V 0.7 A 18 V 0.6 A
L 284 mm (11 - 1/8”) 284 mm (11 - 1/8”)
Dimensions
Net weight (without battery) 0.36 kg (0.79 lbs) 0.36 kg (0.79 lbs)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
W 84 mm (3 - 5/16”) 84 mm (3 - 5/16”)
H 96 mm (3 - 3/4”) 96 mm (3 - 3/4”)
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Read this instruction manual and the charger instruc-
tion manual carefully before use.
2. This flashlight is not waterproof. Do not use it in damp
or wet locations. Do not expose it to rain or snow. Do
not wash it in water.
3. A short-circuit can cause a large current flow, over-
heating, possible burns and even a breakdown.
(1) Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
(2) Do not touch the battery terminals with any con-
ductive material.
(3) Avoid storing the battery cartridge in a container
with any metal objects such as nails, coins, etc.
4. Never expose the battery cartridge to flames, fire or
great heat. Breakage may cause release of injurious
material.
5. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
6. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
7. Be careful not to drop, shake or strike battery.
8. When the tool is not in use, always switch off and
remove the battery cartridge from the tool.
9. Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50°C
(122°F).
10. Do not give the tool a shock by dropping, striking, etc.
11. Do not expose the light to eyes continuously. It may
hurt them.
12. Do not cover or clog the lit tool with cloth or carton,
etc. It may create a risk of fire.
13. Switch off the light immediately when the lamp gets
dark in use. If you leave the lamp switched on, the battery cartridge capacity may decrease.
14. Do not disassemble the charger or battery cartridge;
take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk
of electric shock or fire.
15. If any problem develops, consult your nearest Makita
Service Center or dealer. To maintain product safety
and reliability, repairs, maintenance or adjustment
should be carried out by Makita Authorized Service
Center.
SAVE THESE INSTRUCTIONS.
4
Loading...