Makita 6940D, 6941D Manual

	GB	Cordless Angle Impact Driver		Instruction Manual
		Visseuse d’angle à chocs à batterie		Manuel d’instructions
	F
		Akku-Winkel-Schlagschrauber		Betriebsanleitung
	D
		Avvitatore angolare ad impulso a batteria		Istruzioni per l’uso
	I
		Accu haakse slagschroevedraaier		Gebruiksaanwijzing
	NL
		Llave angular de impacto a batería		Manual de instrucciones
	E
		Berbequim angular de impacto a bateria		Manual de instruções
	P
		Akku-vinkelslagskruetrækker		Brugsanvisning
	DK
		Sladdlös vinklad slagskruvdragare		Bruksanvisning
	S
		Batteridrevet vinkel slagskrujern		Bruksanvisning
	N
		Akkukäyttöinen kulmaiskuväännin		Käyttöohje
	SF
		Ασύρµατ ς γωνιακ ς δηγ ς ώθησης		δηγίες ρήσεως
	GR

6940D

6941D

1
2
1
5
6
3
9
	11
	12
A	B
10	13
5
15
7
2

3

4

2

7

8

4

14

6

ENGLISH

Explanation of general view

1	Battery cartridge	7	Groove	12	Position F
2	Set plate	8	Tooth		(Clockwise rotation)
3	Insert bit	9	Reversing switch	13	Release button
4	Spindle	10	Switch lever	14	Straight head
5	Hex bolt	11	Position R	15	Ratchet head
6	Angle head		(Counterclockwise rotation)

SPECIFICATIONS

Model	6940D	6941D
	(with Angle head)	(with Straight head)
Capacities
Bolt ...........................................................................................	M4 – M10	M4 – M10
Machine screw ..........................................................................	M4 – M8	M4 – M8
No load speed (min-1) ..................................................................	0 – 2,000	0 – 2,000
Impacts per minute ......................................................................	0 – 2,700	0 – 2,700
Fastening torque ..........................................................................	29 N.m	39 N.m
Overall length ..............................................................................	370 mm	360 mm
Net weight ....................................................................................	1.5 kg	1.4 kg
Rated voltage ..............................................................................	D.C. 9.6 V	D.C. 9.6 V

•Due to our continuing program of research and development, the specifications herein are subject to change without notice.

•Note: Specifications may differ from country to country.

Intended Use

The tool is intended for drilling and screw driving in wood, metal and plastic.

Safety hints

For your own safety, please refer to the enclosed safety instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE

ENC004-1

1.Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.

2.Do not disassemble battery cartridge.

3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.

4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.

5.Always cover the battery terminals with the battery cover when the battery cartridge is not used.

6.Do not short the battery cartridge:

(1)Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge to water or rain.

A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

7.Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F).

8.Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

9.Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1.Charge the battery cartridge before completely discharged.

Always stop tool operation and charge the battery cartridge when you notice less tool power.

2.Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life.

3.Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F). Let a hot battery cartridge cool down before charging it.

4.Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months.

ADDITIONAL SAFETY RULES FOR TOOL

1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.

2.Wear ear protectors.

3.Check the socket carefully for wear, cracks or damage before installation.

4.Hold the tool firmly.

5.Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.

6.The proper fastening torque may differ depending upon the kind or size of the bolt. Check the torque with a torque wrench.

3