PRODUCT SPECIFICATIONS
SB80/SB80HB Biltmore Radiant
Wood Burning Fireplace
DIMENSIONS
Actual size: 501⁄2" W x 591⁄4" H x 271⁄2" D x 341⁄2" RW
(1283 mm x 1505 mm x 699 mm x 876 mm)
1
Viewing area: 42" W x 28
(1067 mm x 724 mm, 7723 cm
Framing Dimensions: 51
STANDARD FEATURES
• Clean face design enables non-combustible finishing materials to be
applied up to firebox opening
• Impressive, masonry-style traditional or herringbone
molded brick panels
• Powder coated finish
• Safety firescreen
• Dual gas knockouts
• Steel grate
• Outside air kit standard
• Attic insulation shield standard
• UL/ULC Listed
OPTIONAL FIELD INSTALLED ACCESSORIES
• Bi-fold glass doors with Black trim (DM8042)
• Grand Vista cabinet style mesh doors with
Black trim (GV80BK)
• Contour cabinet style mesh doors with
Black trim (CONTOUR80BK)
• SL1100 series termination caps (SL400 for Canada)
• 4" (102 mm) insulated flex duct for outside air (ID4)
• 4" uninsulated flex duct for outside air (UD4)
• Chimney air kit (CAK5A)(required in Canada)
• Gas logs available
⁄2" H (1197 sq. in.)
2
)
1
⁄2" W x 593⁄4" H x 281⁄2" D
(1308 mm x 1518 mm x 724 mm)
8-5/8"
[219]
9-5/8"
27-1/2"
[699]
59-1/4"
[1505]
49-5/8"
[1260]
7-5/8"
[194]
Gas
Knockout
[244]
Left Side View
34-1/2"
[876]
50-1/2"
[1283]
42" [1067]
Outside
Air
9-1/4"
[235]
9-1/2"
[241]
Framing dimensions in illustrations
accommodate 1/2" finishing material.
23.42"
9-1/2"
[241]
effective height
28-1/2"
[724]
49-1/8"
[1248]
28.25"
Hearth
Dimensions
55-1/2"
[1410]
41.68"
Page 1 of 2
PRODUCT SPECIFICATIONS
SB80/SB80HB Biltmore Radiant
Wood Burning Fireplace
MANTEL CLEARANCES
Combustible Wall
2 x 4 stud wall
Standoffs
Noncombustible
Decorative Facing
such as:
Steel, iron, brick,
tile, concrete, slate,
glass, plasters.
Seal joint with
non-combustible
sealant
Combustible
Decorative Facing
1 1/2 in./
38 mm
maximum
Measured from top of fireplace opening
12 in./305 mm
6 in./152 mm
minimum
Grid represents
1 in. squares
12 in./305 mm
minimum
7 ft (2134 mm)
minimum
base of fireplace
to ceiling
TECHNICAL SPECIFICATIONS
• Flue series: SL1100 series pipe (SL400 for Canada)
• Flue size: 11" (279 mm) inner; 13" (330 mm) outer
• Clearance to flue: 2" (51 mm)
• Firestop framing: 17" x 17" (432 mm x 432 mm)
• Minimum flue height: 18' (5.5 m)
• Maximum flue height: 90' (27.4 m)
• Minimum height with single offset/return: 18.5' (5.6 m)
• Minimum height with double offset/return: 24' (7.3 m)
• Minimum hearth size: 20" D x 66" L (508 mm x 1676 mm)
• UL/ULC design certified
CLEARANCES
• Clearance to fireplace: 11⁄2" (38 mm)
• Maximum mantel depth: 12" (305 mm) from top of
fireplace opening
• Minimum mantel height: 6" (152 mm) from top of fireplace opening
• Adjacent combustible sidewalls: minimum 24" (610 mm) from
fireplace opening
• Mantel leg, surround, stub wall, whether combustible or
non-combustible may be constructed as shown in the
second drawing.
SURROUND, STUB WALL, MANTEL LEG CLEARANCES
Grid represents
1 inch scale.
FLUSH
FRONT
BRICK
FRONT
42 in.
[1067 mm]
22 3/8 in.
[568 mm]
50° angle
50 1/2 in.
39° angle
[1283 mm]
24 in.
[610 mm]
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and
all applicable building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative
purposes only and are not intended for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without
notice. © 2015 Vermont Castings Group 0415v1
24 in.
[610 mm]
4 in.
[102 mm]
19 3/4 in.
[502 mm]
A Brand of Vermont Castings Group
149 Cleveland Drive, Paris, Kentucky 40361
www.majesticproducts.com