Majestic SA36C, SA36R Specifications
PRODUCT SPECIFICATIONS
28-1/4" [718]
8-3/4"
[222]
14-1/8"
[359]
22-3/4"
[578]
42" [1067]
36" [914]
23-3/8"
[594]
8-1/8"
[206]
Ø10-1/2"
[267]
4-1/4"
[108]
9-1/4"
[235]
41-3/8"
[1051]
3-7/8"
[92]
7-1/2"
[191]
13-1/2"
[343]
41-1/4"
[1048]
(effective height)
Gas Knockout
Junction
Box
19.8”
30.9”
18”
SA36R/SA36C Sovereign Radiant/Circulating
Wood Burning Fireplace
DIMENSIONS
Actual size: 42" W x 411⁄4" H x 223⁄4" D x 281⁄4" RW
(1067 mm x 1048 mm x 578 mm x 718 mm)
3
Viewing area: 36" W x 21
(914 mm X 724 mm, 4965 cm
Framing Dimensions: 43" W x 41
⁄8" H (769 1⁄2 sq. in.)
1
⁄2" H x 23" D
(1092 mm x 1054 mm x 584 mm)
2
)
STANDARD FEATURES
• Fully insulated radiant or heat circulating fireplace
• Traditional full refractory lining
• Powder coated finish
• Safety firescreen
• Dual gas knockouts
• Steel grate
• Front access damper handle
• Attic insulation shield standard
• Ash lip
• UL/ULC Listed
OPTIONAL FIELD INSTALLED ACCESSORIES
• Bi-fold glass doors with Black trim (DM1736) or Stainless trim (DM1736S)
• Gasketed cabinet style glass door with Black trim (GGD36BK) for use with
circulating models only
• Grand Vista cabinet style mesh doors with Black trim (GV36BK)
• SL300 series termination caps
• 4" insulated flex duct for outside air (ID4)
• 4" uninsulated flex duct for outside air (UD4)
• Chimney air kit (CAK4A)(required in Canada)
• Outside air kit (AK22) for indoor applications only
• 160 cfm fan kit (FK23) for use on circulating models only
• Variable speed control (SCVS)
• Gas logs available
Page 1 of 2
PRODUCT SPECIFICATIONS
SA36R/SA36C Sovereign Radiant/Circulating
Wood Burning Fireplace
MANTEL CLEARANCES
Combustible Wall
2 x 4 stud wall
Standoffs
Seal joint with
non-combustible
sealant
1 1/2 in./38 mm
maximum
Non-combustible
Decorative Facing
such as:
Steel, iron, brick,
tile, concrete, slate,
glass, plasters.
Measured from top of fireplace opening
Combustible
Decorative Facing
12 in./305 mm
Mantel
12 in./305 mm
minimum
6 in./152 mm
minimum
Grid represents 1 in. squares
6 ft (1829 mm)
minimum
base of fireplace
to ceiling
TECHNICAL SPECIFICATIONS
• Flue series: SL300 series pipe
1
• Flue size: 8" (203 mm) inner; 10
⁄2" (267 mm) outer
• Clearance to flue: 2" (51 mm)
1
• Firestop framing: 14
• Minimum flue height: 16
⁄2" x 141⁄2" (368 mm x 368 mm)
1
⁄2' (5 m)
• Maximum flue height: 90' (27.4 m)
1
• Minimum height with single offset/return: 16
⁄2' (5 m)
• Minimum height with double offset/return: 21' (6.4 m)
• Minimum hearth size: 16" D x 52" L (406 mm x 1321 mm)
• UL/ULC design certified
CLEARANCES
• Clearance to fireplace: 3/4" (38 mm) to sides and back
• Maximum mantel depth: 12" (305 mm) from top of
fireplace opening
• Minimum mantel height: 6" (152 mm) from top of fireplace opening
• Adjacent combustible sidewalls: minimum 12" (305 mm) from
fireplace opening
• Mantel leg, surround, stub wall, whether combustible or
non-combustible may be constructed as shown in the
second drawing.
SURROUND, STUB WALL, MANTEL LEG CLEARANCES
Grid represents 1 in. scale
4 in.
[102 mm]
9 3/4 in.
[248 mm]
A Brand of Vermont Castings Group
149 Cleveland Drive, Paris, Kentucky 40361
www.majesticproducts.com
Page 2 of 2
10 3/4 in.
[273 mm]
FLUSH
FRONT
36 in.
[914 mm]
50° angle
BRICK
FRONT
39° angle
42 in.
[1067 mm]
12 in.
[305 mm]
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire
codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used
as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. © 2015 Vermont Castings Group 0415v1
12 in.
[305 mm]
Loading...