The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at
your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be
followed to prevent accidents that can result in injury or death to yourself or others:
Please check the applicable regulations in your state regarding windshield mounting. Certain
states prohibit the mounting of any items on your windshield. Go to www.magellanGPS.com for
alternative mounting solutions.
When driving, the need to view the display is minimal. Voice prompts will guide you to your
destination. The driver should enter data or program the Magellan RoadMate receiver only when
the vehicle is stationary. Only a vehicle passenger should enter data or program the Magellan
RoadMate receiver while the vehicle is moving. Do not become distracted by the receiver while
driving, and always be fully aware of all driving conditions.
It is your responsibility to comply with all traffic laws and to use the Magellan RoadMate and
mounting options in such a manner that the user is in compliance with applicable laws.
Roads, points of interest (POIs), business and service locations may change over time. As a result
the database may contain inaccuracy. Also, the database does not include, analyze, process,
consider, or reflect any of the following: legal restrictions (such as vehicle type, weight, height,
width, load and speed restrictions); road slope or gradient;
bridge height, width, weight or other limits; population
density; neighborhood quality or safety; availability or
proximity of police, emergency rescue, medical or other
assistance; construction work zones or hazards; road
or lane closures; road, traffic or traffic facilities’ safety or
condition; weather conditions; pavement characteristics
or conditions; special events; traffic congestion. It is your
responsibility to disregard any unsafe, hazardous or illegal
route suggestions.
Keep the Magellan RoadMate receiver safe from extreme temperature conditions. For example, do
not leave it exposed to direct sunlight for an extended period of time.
Take care when mounting the Magellan RoadMate receiver in your vehicle, whether using the
windshield mount or other mounts, that it does not obstruct the driver’s view of the road, interfere
with the operation of the vehicle’s safety devices such as air bags, or present a hazard to occupants
of the vehicle should the receiver be dislodged while driving. It is your responsibility to assess the
risks associated with damage to your vehicle or vehicle occupants as the result of your choices in
mounting the Magellan RoadMate receiver.
Temperature
The maximum operating temperature is 140°F (60°C).
Battery
The battery in the Magellan RoadMate receiver is rechargeable and should not be removed. In the
event that it should need to be replaced, please contact Magellan Technical Support.
Charging the Magellan RoadMate
An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of
RoadMate User Manual Page ii
another type of AC adapter can result in malfunction and/or possible fire hazard due to battery
overheating.
Use only the car charger approved for/supplied with your Magellan RoadMate receiver. Use of
another type of car charger will result in fire or electric shock.
For safety reasons, the battery in your Magellan RoadMate receiver will stop charging when the
ambient temperature is less than 32°F (0°C) or more than 113°F (45°C).
It will take approximately 4 hours of charging the Magellan RoadMate receiver through the vehicle
power adapter or optional AC adapter to obtain a full battery charge. It is recommended that you
charge the battery initially for at least 2 hours.
Use only the charger approved for your Magellan RoadMate receiver.
Estimated usage of the Magellan RoadMate on battery power is approximately 1 hour.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for class B digital devices,
in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution:
compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Any changes or modifications not expressly approved by the party responsible for
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
RoadMate User Manual Page iii
made to the equipment without the approval of manufacturer could void the user’s authority to
operate this equipment.
The Magellan RoadMate receiver must be installed and operated at a distance no closer than 8
inches (20 cm) from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
IC statement
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
One or more claims of the following patents may cover this product: U.S. patent No. 5,544,060,
U.S. patent No. 5,654,892, U.S. patent No. 5,832,408 and U.S. patent No. 5,987,375
The information provided in this document is subject to change without notice. Improvements
and enhancements to the product may occur without any formal notification. Check the
Magellan website (www.magellanGPS.com/support) for product updates and additional
information.
All other products and brand names are trademarks of their respective holders.
No part of this user manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose other than
the purchaser’s personal use, without the prior written permission of MiTAC International
Corporation.
The information provided in this document is correct at the time that it is created. MiTAC
International Corporation assumes no responsibility or liability for any errors or inaccuracies that
may appear in the contents of this User Manual.
112-0079-001
RoadMate User Manual Page iv
Contents
IMPORTANT SAFETY WARNINGS .............................................................ii
1 Magellan RoadMate GPS Receiver with DVR ........................................1
Magellan RoadMate controls and features ............................................................... 2
Setting the GPS Position ...................................................................................................... 30
Viewing the GPS Status ....................................................................................................... 30
Default System Settings ..............................................................................................30
Restoring All Default System Settings ..............................................................................30
Product Information ....................................................................................................30
Viewing Product Information ............................................................................................ 30
RoadMate User Manual Page viii
1 Magellan RoadMate GPS Receiver with DVR
The Magellan® RoadMate® receiver is a
vehicle navigation product with Digital Video
Recorder (DVR) functionality.
It uses GPS signals from satellites to
calculate your precise location and compute
navigational information.
The DVR records continuous video, audio,
location, and other information. The video
provides an impartial witness in case of need.
The RoadMate uses its position and
movement to overlay this information
on detailed maps to provide a visual
representation of your location.
With the Magellan RoadMate receiver you
can:
• Save searches and addresses under the
OneTouch™ menu for fast, convenient
access to favorite destinations and
searches.
• Store your home address and quickly get
routing details to your home.
• Enter and save addresses in your address
book that can be accessed at any time
and get routing information to that
address.
• Route to an address that you enter using
the QuickSpell™ and Smart City search for
easy, errorless address entry.
• Save location information to create a map
later of the places you went.
• Save all or part of the video for later
viewing.
• Customize your Magellan RoadMate
receiver to meet your needs using the
Settings menu.
The user interface for the Magellan RoadMate
receiver is intended to be easy and simple to
follow.
The Magellan RoadMate receiver has a builtin battery so, in most cases, you will be able
to follow these instructions while reading
them on your computer screen without
plugging the Magellan RoadMate receiver to
an external power source. Note that a fully
charged Magellan RoadMate only has about
60 minutes of battery life. If you need or wish
to use external power, you can use an optional
AC power adapter.
While the Magellan RoadMate has a powerful
GPS chipset, you may not get strong enough
satellite signals to compute your location when
indoors or in a parking garage. If you find
you are not getting strong enough satellite
signals while in a garage or other structure,
move to a location where there is a clear view
of the sky and you should immediately see an
improvement in signal strength.
• Route to any point of interest (POI) that
has been preloaded into your Magellan
RoadMate receiver.
• Create a route with multiple destinations.
Handy for business people who need
routing information to many destinations.
• View POIs that are near exits ahead of
you on the highway. The Highway Exit
POIs function provides you with a list
of gas stations, restaurants, hotels and
auto repair shops located near exits you
are approaching while travelling on the
interstate.
RoadMate User Manual Page 1
The Magellan RoadMate receiver includes
Voice Alerts (both prerecorded and Text-toSpeech) for driving instructions.
We hope that you find this manual useful and
the instructions easy to follow.
Magellan RoadMate controls and features
D
E
F
Magellan RoadMate 6220-LM, 6230-LMX, 6235-LM
ABC
Power button
A
DVR Lock buttonLocks current video segment to prevent overwriting.
B
MicroSD Card for DVRRequired for DVR function: MicroSD card provided with unit
C
Audio OutConnect external headphones.
D
MicroSD Card slotAvailable for use as external card reader for DVR playback on a PC.
E
USB ConnectorConnect to power source* or personal computer
F
Press and hold to turn the device on or to completely shut down.
Press momentarily to suspend or resume the device.
***
**
Reset
The reset button is located on the back of the receiver in the upper right corner. If you have
problems with your receiver or in the unlikely event that it locks up, use a paperclip and gently
insert it into the reset hole to press the reset button with the receiver turned on. The receiver
should restart with the factory defaults loaded.
* Power input from vehicle power adapter cable or optional AC
power adapter.
** Connect your receiver to a personal computer to playback or
save DVR videos, and to update maps and software using the
Magellan Content Manager application.
*** Size may vary by model for 6220-LM, 6230-LMX and 6235-LM.
RoadMate User Manual Page 2
2 Fundamentals
Battery Levels
The Magellan RoadMate receiver has an
internal battery that is charging whenever the
receiver is connected to external power.
Note: The battery can only be serviced by
authorized Magellan repair facilities.
Viewing the Battery Level Indicator
1. While viewing the Map screen, tap on
the Menu button in the right corner.
2. The battery level indicator is located in
the upper right corner of the Main Menu,
just below the satellite signal indicator.
Green bars indicate battery level.
Speaker Volume
3. Tap .
Changing the Volume from Settings
1. Access the Main Menu.
2. Tap the Settings icon.
3. Tap Sound.
4. Tap the top or bottom of the Master
volume adjust bar or drag the slider
button to change the volume level of the
Magellan RoadMate receiver.
5. Tap to save and return to the
Settings screen.
Setting Button Sounds On or Off
1. Access the Main Menu.
2. Tap the Settings icon.
3. Tap Sound.
Changing the Volume from the Map
Screen
1. Tap the speaker icon . Additional
controls appear.
2. Tap the speaker button to mute the
volume, or tap the ‘+’ or ‘-’ buttons to
raise or lower the volume.
4. Tap the check box for Button Sounds.
Check to have button sounds played,
unchecked to turn them off.
Setting Smart Volume On or Off
Smart Volume is a feature of the receiver that
changes the volume automatically as your
speed changes, compensating for road noise.
1. Access the Main Menu.
2. Tap the Settings icon.
3. Tap Sound.
4. Tap the check box for Smart Volume.
When checked, Smart Volume is on.
RoadMate User Manual Page 3
Brightness
Accessing the Main Menu
Accessing the Brightness Control
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Brightness.
4. Tap the ends of the brightness adjust
bar or drag the slider to set the desired
brightness.
Note: On the Brightness Setting screen there
is a “Dim on Battery Power” option. When
checked, the Magellan RoadMate receiver
will reduce the brightness when operating
exclusively on battery power and you have
not used the touch screen for a few seconds.
This prolongs the battery life between
charges.
1. From the Map screen tap Menu.
Functions Available from the Main Menu
AddressEnter an address as a des-
tination for you route.
Points of Interest
PreviousList of the most recent
IntersectionCreate a route to the in-
City CenterCreate a route to the geo-
Current Location
CoordinatesAllows direct input of
BackAccess the Map screen.
Select a Point of Interest (POI) from the list of
preloaded locations as a
destination.
destinations that you have
gone to before allowing
you to quickly select one
to route to again.
tersection of two streets.
graphical center of a city.
Displays information
about your position
including the street name,
names of streets forward
and behind you as well as
the Lat/Long information
for your position.
Latitude and Longitude to
create a route.
Main Menu
The Main Menu screen is the center for all
available functions of the Magellan RoadMate
receiver. The Main Menu contains large, easy
to access icons for all the major functions.
Address BookAccess the Address Book
where you can save addresses and destinations
to have available when
needed.
DVRDisplays the DVR screen.
SettingsDisplays the Settings
menu. Lets you customize
the Magellan RoadMate
receiver to your personal
needs.
Satellite StatusGraphic display of the
strength of satellite signals
being received.
Battery LevelGraphic display of the
current battery level.
RoadMate User Manual Page 4
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.