Magellan MHI1-548 User Manual

HYBRID SERIES USER MANUAL

350-00xxx-00

HYBRID INVERTER

M
64 bushland Ridge Bibra Lake,Perth Western Australia,6148
[e-mail]
Worldwide [phone]
Fax [phone]

agellan Powertronics Pty.Ltd

1 Introduction

2 Important Safety Warning

3 Installation

4 Electrical Connection

5 LED Lights Illustration

6 HESS APP Illustration

7 Work Modes
Error Messages8
9Technical Parameters

10 Certificates

3.1 Packing List

3.2 Product Overview

3.3 Selecting The Mounting Location

3.4 Mounting

.. ......................... 03.............

.......................... ....... 03

............. 04

........ ........... 05........................

............................................................... 14

.......................................................................................... 01

..... ................................. 15....................................................

......... ..... .................................... 16.... ............................

.... ................................ 17............................

......... ................................................. 19.....................................

4.1 AC Output Connection

4.2 PV Connection

4.3 Battery Connection

4.4 RS-485 Connection

4.5 HESS Meter Connection

4.6 Wi-Fi Connection

4.7 Wi-Fi Reset & Reload

4.8 USB Connection

4.10 Processing method of batteries connect

multiple inverters

4.9 System Connection Diagram

........................... 05

........................ . ............ 07

...... ................. 08........

...... .................. 09........

...... .............. 10......

.................................. 11

...... ........... 11............

...... ......................... 12.....

.... .. ....... 12.... ...

... .. ...................... 14................................... ..

2.1 Symbols

2.2 Safety

. ......................... 01...................

........................................ ....... 02

................................. 13

1 Introduction

Before using the inverter, please read all instructions and cautionary markings on the unit and this manual. Store the manual where

it can be accessed easily.

The hybrid series inverter of Magellan Powertronics Pty Ltd. (hereinafter referred to as Magellan) strictly conforms to related safety

rules in design and test.

Safety regulations relevant to the location shall be followed during installation, operation and maintenance.

Improper operation may have a risk of electric shock or damage to equipment and property.

01

2 Important Safety Warning

02

Caution!
Failure to observe a warning indicated in

this manual may result in injury.

Danger of high voltage and electric shock!

Danger of hot surface!

Components of the product can be recycled.

This side up; the package must always be

transported, handled and stored in such a way

that the arrows always point upwards.

No more than six (6) identical packages may

be stacked on each other.

Magellan hybrid series inverters are bidirectional which apply to PV system with battery to store energy.
Energy produced by the PV system is used to optimize self-consumption; excess energy is used to charge the batteries, and then fed
into the public grid when the PV energy is adequate,
When PV energy output is insufficient to support connected loads, the system automatically get energy from the batteries if battery
capacity is abundant. If the battery capacity is insufficient to meet own consumption requirements, electricity will be drawn from the
public grid.
Magellan hybrid series inverter is design for both indoor and outdoor use.

Figure 1-1 Basic hybrid PV system overview

2.1 Symbols

Product should not be disposed as

household waste.

CE Mark

Keep dry; the package/product must be

protected from excessive humidity and must be

stored under cover.

Signals danger due to electrical shock and indicates the time (5 minutes) to allow after the

inverter has been turned off and disconnected to ensure safety in any installation operation.

The package/product should be handled

carefully and never be tipped over or slung.

2.2 Safety

● Installation, maintenance and connection of inverters must be performed by qualified personnel, in compliance with local electrical
standards, wiring rules and the requirements of local power authorities and/or companies (for example : AS 4777 and AS/NZS

3000 in Australia).

● To avoid electric shock, DC input and AC output of the inverter must be terminated at least 5 minutes before performing any

installation or maintenance.

● The temperature of some parts of the inverter may exceed 60℃ during operation. To avoid being burnt, do not touch the inverter

during operation. Let it cool before touching it.

● Ensure children are kept away from inverters.

● Do not open the front cover of the inverter. Apart from performing work at the wiring terminal (as instructed in this manual),

touching or changing components without authorization may cause injury to people, damage to inverters and annulment of the

warranty.

● Static electricity may damage electronic components. Appropriate method must be adopted to prevent such damage to the

inverter; otherwise the inverter may be damaged and the warranty annulled.

● Ensure the output voltage of the proposed PV array is lower than the maximum rated input voltage of the inverter; otherwise the

inverter may be damaged and the warranty annulled.

● When exposed to sunlight, the PV array generates dangerous high DC voltage. Please operate according to our instructions, or it

will result in danger to life.

● PV modules should have an IEC61730 class A rating.

● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

● Completely isolate the inverter before maintaining. Completely isolate the inverter should ：Switch off the DC switch, disconnect

the PV terminal, disconnect the battery terminal, and disconnect the AC terminal.

● Prohibit to insert or pull the AC and DC terminals when the inverter is running.

● In Australia, the inverter internal switching does not maintain the neutral integrity, neutral integrity must be addressed by external

connection arrangements like the example proposed in the diagram 4.9.

● In Australia, the output of backup side in switchbox should be labeled 'main switch UPS supply', the output of normal load side in

switchbox should be labeled 'main switch inverter supply'.

Refer to the operating instructions.

03 04

Figure 3.3-1

3.2 Product Overview

1 2

3

4

5

9

6 7

Mounting location should be selected based on the following aspects:

● The installation method and mounting location must be suitable for the inverter's weight and dimensions.

● Mount on a solid surface.

● Select a well ventilated place sheltered from direct sun radiation.

● Install vertically or tilted backward by max 15°. The device cannot be installed with a sideways tilt. The connection area must point

downwards. Refer to Figure 3.3-1.

●

than the following value:

In consideration of heat dissipation and convenient dismantlement, the minimum clearances around the inverter should be no less

Upward ----------300mm

Downward--------500mm

Front-------------300mm

Both sides---------500mm

Figure 3.3-2

300mm

500mm

500mm 500mm 300mm

3.3 Selecting The Mounting Location

●

● For the convenience of checking the LED lights and possible maintenance activities, please install the inverter at eye level.

● Inverters should NOT be installed near inflammable and explosive items. Any strong electro-magnetic equipment should be kept

away from installation site.

● Product label and warning symbol shall be clear to read after installation.

● Please avoiding direct sunlight, rain exposure, snow lay up when installing.

In order to achieve optimal performance, the ambient temperature should be lower than 45 °C.

Direct Sunlight

Rain Exposure

Snow Lay up

No direct sunlight

No Rain Exposure

No Snow Lay up

3.1 Packing List

3 Installation

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should have received the

following items inside of package:

1. Battery input terminals

2. PV input terminals

3. DC Switch (Optional)

4. Wi-Fi antenna port

5. USB port

6. RS-485 port

7. Back-Up port

8. On-Grid port

9. LED lights

8

Max

15°

Wall-mounted

Bracket×1

Inverter×1

Quick Installation

Guide×1

Instruction

of

Fast

Installation

Wi-Fi Connection

Guide×1

Wi-Fi Connection

Configuration

Battery cover × 1

AC cover × 1

AC terminal × 6

Battery terminal × 2

Negative DC

Plug×2

or

User Manual×1

User

manual

Expansion Bolts×6

Hexagon head

screw × 2

Pan head screw × 8

Positive DC Plug×2

or

HESS Meter × 1

Single Energy Meter

Antenna×1