Magellan MG32WK User Manual
MG32WK - User’s Quick Reference Guide
KEYPAD OVERVIEW
Indicator Lights
Arm LED (red):
On = Full armed
Flash = System in alarm
Stay LED (orange):
On = Stay armed
Flash = System in alarm
Ready LED (green):
On = All zones are closed
Flash = Exit delay
Rx/Tx LED (orange):
On = Power of console
Flash = Transmission/reception
in progress
key: Press to refresh the display.
key: Press and hold (3 sec.) to adjust the backlight.
PG1] key: Press and hold (3 sec.) to control_____________________
[
PG2] key: Press and hold (3 sec.) to control_____________________
[
FM] key: Press to turn the FM tuner on/off.
[
MG32WK
Keys
Indicator Lights
LED (red):
On = Keypad battery
Flash = Keypad battery low
Flash = Message waiting
FM LED (green):
On = FM tuner on
charging
LED (orange):
Zone Display:
The numbers [1] to [32]
correspond to zones 1 to 32
respectively. Open or entry delay
zones are illuminated, and flash
in alarm.
WHEN LEAVING...
To Regular Arm:
1. Close all zones.
2. Enter your [
TO ARM
USER CODE].
ARMING AND DISARMING
TO ARM
WHEN STAYING...
To Stay Arm:
1. Press the [
2. Enter your [
STAY] key.
USER CODE].
PANIC ALARMS
To send a silent or audible alarm to your
Security Company, press and hold one of the
button combinations listed for 3 seconds.
Panic Alarm Type Button Combinations
Non-medical
emergency
Auxiliary
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
ALARM MEMORY DISPLAY
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the [
3. The corresponding zone numbers that were in alarm the last time the system was armed will illuminate.
4. Press the [
MEM] key.
CLEAR] key to exit.
TROUBLE DISPLAY
When a trouble condition occurs, the [
will illuminate.
1. Press the [TBL] key. The key will flash and number(s) corresponding to the trouble(s) will illuminate.
2. Read the corresponding explanation of the trouble from the trouble list on the keypad door label.
3. Press the [
CLEAR] key to exit.
TBL] key
BYPASS PROGRAMMING
Bypassed zones remained unarmed when the
partition is armed.
1. Press the [BYP] key.
2. Enter your [
3. The corresponding LED of all bypassed zones will illuminate. Select the zone(s) you want to bypass/unbypass by entering the two-digit zone number (i.e. zone 3 = 03).
4. Press the [
ACCESS CODE].
ENTER] key to save and exit.
KEYPAD SETTINGS
To mute the keypad:
Press and hold the [
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the
seconds.
2. Press the
[] key to set the desired
backlight level.
3. Press [
© Paradox Security Systems Ltd., 2005-2007. Magellan is a trademark or registered trademark of Paradox Security Systems Ltd. and its affiliates in Canada, the United States and/or other countries. All rights reserved.
CLEAR] or [ENTER] to exit.
CLEAR] key for 10
[] key for 3
PRINTED IN CANADA 03/2007 MG32WK-EQ01
paradox.com
Loading...