Mackie Fussion 3000 Parts list

FUSSION 3000

Fussion Series 3-Way Active Speaker System

■ Mackie’s FUSSION 3000 is a high-output, 3-way, medium-

throw, active speaker system. It features high-precision trans­ducers combined with application-specifi c amplifi er technol­ogy that allows this integrated system to generate high output
levels with very low distortion characteristics.

■ FUSSION 3000 transducers include a special, low induc-

tance, double voice-coil 8-inch, horn-loaded (80˚ x 70˚ )
midrange transducer designed to deliver the lowest possible
distortion even at full power. It operates between 500Hz and
2,500Hz, eliminating the placement of a crossover point in the
middle of critical voice frequencies. The result is super-smooth
phase and power response that delivers extraordinary intel­ligibility at high output levels.

■ A 3-inch titanium diaphragm compression driver, mounted

to an 80˚ x 70˚ horn with a 1.4-inch exit throat, reproduces fre­quencies above 2,500Hz. Mackie Designs has implemented a
unique “Vacuum Tube” philosophy for amplifi ers designed for
mid and high-frequency reproduction. The FUSSION 3000 fea­tures two Trans-Fet amplifi ers, one for the midrange driver and
a modifi ed version for the high-frequency compression driver.
Our Trans-Fet technology combines a very simple Class AB
design topology with special transformers fi tted on the ampli­fi er outputs, that assists in eliminating intermodulation distor­tion by-products. This type of design emulates the celebrated
warmth and transparency of vacuum tube amps. The result is
clear, and accurate reproduction.

■ The FUSSION 3000 delivers deep, quick bass through the

use of four 12-inch high output woofers. Each 12-inch woofer
handles 350 watts RMS long term. Placing four devices within
the cabinet allows the FUSSION 3000 to produce very deep,
precise reproduction of low frequencies. Using four 12-inch
woofers allows low frequency reproduction to be extremely
“quick” compared to other designs. The low frequency ampli­fi er module is an excellent example of the effi ciency of active
designs. This amplifi er uses a high-effi ciency, high-current
topology to produce 1500 watts of power from a module the
size of a single sheet of paper.

■ Frequency response of the FUSSION 3000 is linear between

55Hz and 18KHz. The system processor provides complete sys­tem management of all electronic and acoustic functions includ­ing electronic active crossover, electronic phase alignment,
electronic time correction, electronic equalization and complete
amplifi er and component protection. Because it is designed to

(continued on last page)

Features

■ Active, high-output, wide dispersion 3-way system

■ 80° x 70° coverage pattern

■ High output, 133dB in High Pass Mode Operation

■ Four 12” high-precision transducers

■ Low distortion, horn-loaded 8” mid-range transducer

■ 3” titanium diaphragm compression driver

■ 18mm birch plywood construction

■ 1500W high-effi ciency, high-current amplifi er

for woofers

■ 300W Trans-Fet amplifi er for mid-range

■ 150W Trans-Fet amplifi er for compression driver

■ On-board acoustic management control system

■ Integrated ATM hanging and fl ying hardware

Applications

■ Main PA

■ Fills

■ Night Clubs

■ Corporate Events

SPEAKER

FUSSION 3000

OF 8 PAGES

1

oF 6 PAGES

FUSSION 3000

3-Way Active Speaker System

SPEAKER

Specifi cations

System Acoustic

Frequency Range (–10dB): 45Hz–20kHz
Frequency Response (–3dB): 55Hz–18kHz
Horizontal Coverage Angle (–6dB): 80˚ averaged

2kHz to 10kHz
Vertical Coverage Angle (–6dB): 70˚ averaged

2kHz to 10kHz
Directivity Factor; DI(Q): 10.19 (10.46) averaged

FUSSION 3000

2kHz to 10kHz
Rated Maximum SPL (long term): 130dB @ 1m
Rated Maximum SPL (peak): 133dB @ 1m
Rated Maximum SPL-High Pass On: 85Hz–18kHz: 132dB

(long term)
Rated Maximum SPL-High Pass On: 85Hz–18kHz: 135dB

(peak)
Crossover Points: 500Hz, 2,500Hz
Dynamic Range: >110dB
Phase Response: ±35˚ from 500Hz to 10kHz

Transducers

Low Frequency (4 each wired series-parallel)
Cone Diameter: 12” (300mm)
Voice Coil Diameter: 3” (75mm)
Power Handling: 350 watts rms (long term)
Mid Frequency
Cone Diameter: 8” (200mm)
Voice Coil Diameter: 2” (50mm)
Power Handling:

150 watts rms (long term)
High Frequency
Diaphragm Diameter: 3” (75mm)
Throat Exit Diameter: 1.4” (35.6mm)
Diaphram Material: Titanium
Power Handling: 75 watts rms (long term)

Amplifi ers

Low Frequency:
Rated Output per AES standard @ low frequency

driver impendance:
1000 watts Continuous Average Power
1500 watts peak
Type: Class G High Effi ciency, High Current
Cooling: Convection Extrusion
Mid Frequency:

Rated Output per AES standard @ mid frequency
driver impendance:
200 watts Continuous Average Power
300 watts peak
Type: Mosfet Based Class AB
Cooling: Convection Extrusion

High Frequency:
Rated Output per AES standard @ high frequency

driver impendance:
100 watts Continuous Average Power
150 watts peak
Type: Mosfet Based Class AB
Cooling: Convection Extrusion

1

Audio Input / Output / Controls

Main Input, Loop Out: 50kΩ impedance, balanced
Sub-Out Signal: 85Hz low pass output with

protection and active monitoring
for FUSSION 1800S/1800SA
active subwoofer system

Fill Out Signal: 85Hz high-pass signal
Fill Out Signal Level Control: 0 dB to –30 dB
Fill Out Phase Control: 0˚–180˚
High-Pass Switch: Allows system to

operate from 85Hz up only

Line Input Power

US: 120VAC, 60Hz
Recommended Amperage Service: 20A
AC Connector: 3 pin Twistlock 250VAC, 20A male
Europe: 230VAC, 50Hz
Recommended Amperage Service: 16A
AC Connector: 3 pin IEC 250VAC, 16A male
In-rush Current Protection: Yes, transistor based

Control System Functions

Electronic Crossover
Phase Alignment

1

1

Time Correction
Equalization

Safety Features

RMS Limiting: Monitoring and limiting of
continuous RMS output of amplifi ers

Thermal: Monitoring of thermal condition of
power supply and amplifi ers. High
temperature condition engages input
stage shut down and auto reset function.

Physical

Enclosure: Trapezoidal, 15° side angles,
18mm multi-layered birch

Hanging Inserts: 4 points on top
Rigging Inserts: 2 points, 1 each side ATM MEGS

1 pull back clip, bottom
Handles: 4 ea. aluminum/rubber grips
Color: Black, splatter paint
Grille: Custom perforated oval steel grille

with anti-corrosive treatment

Dimensions:

Height: 41 in (104.1cm)
Front Width: 25 in (63.5cm)
Rear Width: 13.9 in (35.3cm)
Depth: 23 in (58.4cm)
Net Weight: 246 lbs. (112kg)

Options

Active Subwoofer System: Fussion 1800SA / 1800S
Flyware: ATM Megs Compatible

Footnote 1: Power handling for transducers is based on AES long term power testing standard
conducted for 100 hours full power, free air.

OF 8 PAGES

2

oF 6 PAGES

OF 6 PAGES

2

oF 6 PAGES

FUSSION 3000

FUSSION 3000
Ver tical Polars

3-Way Active Speaker System

200Hz

250Hz

315Hz

400Hz

1.25kHz

1.6kHz

2kHz

2.5kHz

500Hz

630Hz

800Hz

1kHz

3.15kHz

4kHz

5kHz

6.3kHz

8kHz

10kHz

12.5kHz

16kHz

Vertical Off-Axis Frequency Response (UP)

Vertical Off-Axis Frequency Response (DOWN)

OF 6 PAGES

OF 8 PAGES

3

oF 6 PAGES

FUSSION 3000

FUSSION 3000

3-Way Active Speaker System

Horizontal Polars

0˚

200Hz

250Hz

315Hz

400Hz

0˚

1.25kHz

1.6kHz

2kHz

2.5kHz

0˚

500Hz

630Hz

800Hz

1kHz

0˚

3.15kHz

4kHz

5kHz

6.3kHz

OF 8 PAGES

4

Horizontal Off-Axis Frequency Response

0˚

8kHz

10kHz

12.5kHz

16kHz

oF 6 PAGES

FUSSION 3000

Frequency response

120

100

80

60

40

dB SPL

3-Way Active Speaker System

20

0

20

Beamwidth vs. Frequency

Fundamental
High Pass On
2nd harmonic

3rd harmonic

100 1000 10000

Frequency (Hz)

Directivity Index

20000

OF 8 PAGES

5

oF 6 PAGES

FUSSION 3000

24.72" (628mm)

13.86" (352mm)

22.64" (575mm)

3-Way Active Speaker System

22.64" (575mm)

41.89" (1064mm)

41.89" (1064mm)

BOTTOM

24.72" (628mm)

SIDE

OF 8 PAGES

6

oF 6 PAGES

FRONT

REAR

FUSSION 3000

3-Way Active Speaker System

Input/Output Control Panel

Euro/230V Control Panel with IEC AC Connector

WARNING:

THIS SURFACE MAY REACH HIGH TEMPERATURE DURING
STANDARD USE. TO ENSURE PROPER OPERATION ALLOW A MINIMUM OF 6 INS.
OF CLEARANCE FROM THIS SURFACE AND ADEQUATE VENTILATION. TO REDUCE
THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THIS PANEL OR ANY ATTACHED
COMPONENT. NO OPERATOR SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVI S:

RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR

UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE

MANUFACTURING DATE

3000

™

FUSE

10A / SB

FUSE

16A - 230 VAC

ON

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE

SERIAL NUMBER

CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC, WOODINVILLE, WA, USA

AND MACKIE EUROPE • MANUFACTURED IN ITALY • COPYRIGHT ©1998 •

THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.:

"MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING

FUSSION

FS

POWER (GREEN)
PROTECT (RED)

FILL OUT

85Hz - 20kHz

PHASE

0˚ 180˚

PARALLEL

MAIN INPUTLOOP OUT

MAIN INPUT

HIGH PASS

85Hz - 20kHz

FULL RANGE
55Hz - 20kHz

PIN 1- GND / PIN 2- POS (+) /

PIN 3- NEG (-)

OUTPUT

LEVEL

0

10

SUB-OUT

20Hz - 85Hz

OF 8 PAGES

7

oF 6 PAGES

FUSSION 3000

3-Way Active Speaker System

SPEAKER

FUSSION 3000

Architects’ and Engineers’ Specifi cations

The active, 3-way, full-range loudspeaker system shall
incorporate four 12-inch low-frequency (LF) transducers,
one horn-loaded 8-inch mid-frequency (MF) transducer and
a 1.4-inch exit, 3-inch titanium diaphragm, compression
driver high-frequency (HF) transducer. The LF drivers shall be
mounted in a vented, multi-ply birch wood enclosure, tuned
for optimum low-frequency response. The MF transducer
shall be sealed from the rear and loaded on a one-piece horn
assembly providing optimum compression ratio and disper­sion characteristics. The HF transducer shall be mounted on
an aluminum, constant-directivity horn. The system shall pro­vide a nominal coverage pattern of 80˚ (horizontal) x 70˚ (ver­tical). System frequency response shall vary no more than
±3dB from 60Hz to 18kHz measured on axis. The loudspeaker
shall incorporate a low-frequency amplifi er, capable of deliv­ering 1500 watts over a frequency range of 20Hz to 500Hz.
The system shall incorporate a 300-watt amplifi er specifi cally
designed to power the MF driver over the range of 500Hz
to 2.5kHz and a 150-watt amplifi er specifi cally designed to
power the high­frequency driver over the range of 2.5kHz to 20kHz. The
amplifi ers shall be mounted on an aluminum heat sink
installed within the cabinet. The loudspeaker enclosure shall
have a trapezoidal shape and shall incorporate four side han­dles along with hanging and rigging hardware. The system
will include a control panel with XLR input connector and an
XLR loop-through signal connector, a high-pass or full-range
mode selection switch, a sub-out XLR connector providing
low-pass audio and control signal for subwoofer systems, a
“Fill-Out” XLR connector with level and phase controls, and
power and protection mode LED indicators. The front of the
loudspeaker shall be covered with a powder-coated, weather­resistant perforated steel grille.

The active 3-way full-range loudspeaker system shall be
the Mackie Designs FUSSION 3000.

(continued from fi rst page)

deliver very high output levels (133dB peak-full range) and
wide dispersion, the system can only be line-arrayed with
other FUSSION 3000 cabinets. The system’s wide dispersion
characteristics do not allow it to be used in large arrays.

■ FUSSION 3000 is the fi rst professional speaker system

to create a completely ideal union between transducers
and amplifi ers. To ensure long-term reliability and perfor­mance, the amplifi er cards and processor are mounted to a
huge heat sink eliminating the need for fans, dramatically
extending life expectancy and eliminating maintenance
cycles. An easily-accessible rear input and control panel
offers substantial signal routing fl exibility. All audio connec­tions are via XLR connectors, including a main input with a
loop-through output for connection to other enclosures.A
Full Range/High Pass switch allows the FUSSION 3000 to
be operated full range or above 85Hz only. A SUB-OUT con­nector allows simple connection to the Fussion 1800AS/
1800S active subwoofer system. The SUB-OUT signal is
low-passed below 85Hz and also contains the limiting and
protection circuitry for the active subs. For sound reinforce­ment situations where “fi ll” speakers are needed, there is a
Fill-Out connector with level and (0˚–180˚) phase controls.
Mackie’s FUSSION 3000 can run on 115V AC or 230V AC
single phase. The system features soft-start circuitry that
eliminates “pops” and precisely controls AC in-rush current
surges.

www.mackie.com

16220 Wood-Red Rd NE, Woodinville, WA 98072 USA

800.898.3211, fax [phone], [e-mail]

UK [phone], fax [phone], [e-mail]
ITALY [phone], fax [phone], [e-mail]
FRANCE [phone], fax [phone], [e-mail]
GERMANY [phone], fax [phone], [e-mail]

Electronic fi les for this product available at:
www.mackie.com

This Specifi cation Sheet FUSSION3000.PDF
Architects’ & Engineers’ Specifi cations FUSSION3000AE.TXT
Quick-Start Manual FUSSION3000QS.PDF
Applications Guide FUSSION3000AG.PDF
Owner/Operator’s Manual FUSSION3000ML.PDF
CADD fi les FUSSION3000.DXF
EASE data FUSSION3000.EAS

Mackie continually engages in research related to product improvement. New material, production meth­ods, and design refi nements are introduced into existing products without notice as a routine expres­sion of that philosophy. For this reason, any current Mackie product may differ in some respect from its
published description, but will always equal or exceed the original design specifi cations unless otherwise
stated. ©1999-2000 Mackie Inc. All rights Reserved. and are registered trademarks of
Mackie Inc. Mackie is a trademark of Mackie Designs Inc.

part no. 910-225-00 Rev A

OF 8 PAGES

8

oF 6 PAGES