Mackie DX810 User Manual
DX810
Digital Audio Mixer/Signal Processor
Instruction Manual Addendum
For v3.2
Remote Mapping
DX-810 Version 3.2 software adds the capability of
mapping individual buttons on the DX-SW4 remote
control. This means that each button can be
assigned a different function, rather than being
limited to four sequential selections of the same
function (addresses 0 to 40).
New remote addresses (from 41 to 56) have been
added to implement this feature. (See the table on
the reverse side for these address settings).
This feature can be accessed both in the Button
Section
and in the Windows drop-down menu of the DX-810
V3.2 software.
Clicking either of these options opens the Remote
Mapping window:
Four buttons along the top of this window allow
selecting 16 DX-SW4 remotes in groups of four.
The four selected remotes (addresses 41-44, 45-48,
49-52, and 53-56) appear in the Remote Mapping
window. Drop-down menus for each of the four
buttons on the remote are provided for selecting
the Function and the Affected I/O. The following
chart indicates the Function and Affected I/O
selections available:
Function Affected I/O
Force On Inputs 1-8
Force Off Inputs 1-8
Mute/Enable Input Inputs 1-8
Mute/Enable Output Outputs A-J
Mute/Enable Group Groups 1-32
Preset Recall Presets 1-24
Combine Combine 1-16
With the DIP switches on the DX-SW4 set for the appropriate address (41 through 56), it is now possible to
assign any of these listed functions to any of the four DX-SW-4 selection buttons.
R20
R21
R22
R23
R24
R25
R26
R27
DIP Switches
D2
S1
J5
J3
R7
L2 L1
ON
1
2345 678
FUNCTION
C16
R34
R4
C9
R6
C10
R5
J2
D4
GND
U6
D3
A
U5
C14
J4
C7
C3
C4
R35
R1
R2
U2
R3
C8
B
PWR
In addition to the preset functions (addresses 0 to 40),
the following DX-SW4 DIP switch settings are available:
DX-SW4 Remote Switch Control (4-button/4-LED)
for DX-810 v3.2 (Firmware v7.04)
Switch Positions*
ID 1 through 8 Function
41 10010100 Assignable in Remote Mapping Window
42 01010100 Assignable in Remote Mapping Window
43 11010100 Assignable in Remote Mapping Window
44 00110100 Assignable in Remote Mapping Window
45 10110100 Assignable in Remote Mapping Window
46 01110100 Assignable in Remote Mapping Window
47 11110100 Assignable in Remote Mapping Window
48 00001100 Assignable in Remote Mapping Window
49 10001100 Assignable in Remote Mapping Window
50 01001100 Assignable in Remote Mapping Window
51 11001100 Assignable in Remote Mapping Window
52 00101100 Assignable in Remote Mapping Window
53 10101100 Assignable in Remote Mapping Window
54 01101100 Assignable in Remote Mapping Window
55 11101100 Assignable in Remote Mapping Window
56 00011100 Assignable in Remote Mapping Window
*Switch Positions: 1=ON; 0=OFF
Part No. 0005655 Rev. A 03/03
© 2003 Mackie Designs Inc. All rights reserved.
Printed in the U.S.A.
Loading...