Mackie CR3-X, CR4-X, CR5-X Users Manual
OWNER’S MANUAL
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Minimum distance (5 cm) around the apparatus for sucient ventilation.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
10. No naked flame sources, such as lighted candles, should be placed on the apparatus.
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement
CR-X Multimedia Monitors
of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
15. Unplug this apparatus during lightning storms or when unused for long
periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
17. This apparatus shall not be exposed to dripping or splashing, and no object filled
with liquids, such as vases or beer glasses, shall be placed on the apparatus.
18. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the prescence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
significant magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user of the prescence of important operating and
maintaining (servicing) instructions in the literature accompanying
the appliance.
WARNING — To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CAUTION – These servicing instructions are for use by
qualified service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that contained
in the operating instructions unless you are qualified to do so.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
PORTABLE CART
WARNING
19. This apparatus has been equipped with a rocker-style AC mains power switch.
This switch is located on the rear panel and should remain readily accessible to the user.
20. The MAINS plug or an appliance coupler is used as the disconnect device,
so the disconnect device shall remain readily operable.
21. Explanation of symbol, marking, signal lamp or similar means indicates that the apparatus
is completely disconnected from the mains.
22. WARNING: Please refer to the information on exterior bottom enclosure for electrical
and safety information before installing or operating the apparatus.
23. The use of apparatus is in tropical climates.
24. NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 5 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio,
LLC. could void the user’s authority to operate the equipment under FCC rules.
25. This apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of the Canadian Department
of Communications.
Canada ICES-003(B)/NMB-003(B)
ATTENTION
26. This equipment is a Class II or double insulated electrical appliance. It has been
27. This device complies with Part 5 of the FCC rules and Industry Canada’s license-exempt
28. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals
According to OSHA, any exposure in excess of these permissible limits could result in some
— Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant las limites applicables aux appareils numériques de class A/de class B
(selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté
par les ministere des communications du Canada.
designed in such a way that it does not require a safety connection to electrical
earth.
RSS standard(s). Operation is subjected to the following two conditions:
() this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone
will lose some hearing if exposed to suciently intense noise for a period of time.
The U.S. Government’s Occupational Safety and Health Administration (OSHA)
has specified the permissible noise level exposures shown in the following chart.
hearing loss. To ensure against potentially dangerous exposure to high sound pressure
levels, it is recommended that all persons exposed to equipment capable of producing high
sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs
or protectors in the ear canals or over the ears must be worn when operating the equipment
in order to prevent permanent hearing loss if exposure is in excess of the limits set forth
here:
Duration, per
day in hours
Sound Level dBA,
Slow Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 00 Very loud classical music
.5 02
05 Craig screaming at Troy about deadlines
0.5 0
0.25 or less 5 Loudest parts at a rock concert
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (202/9/EU)
and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling
of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated
with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the eective usage of natural resources. For more information about
where you can drop o your waste equipment for recycling, please contact your local city oce, waste authority, or your household waste disposal service.
CR-X Multimedia Monitors
2
Contents Features
Owner’s Manual
Important Safety Instructions ....................2
Contents .......................................................3
Features ........................................................3
Introduction .................................................4
Getting Started ............................................4
Hookup Diagrams ........................................5
CR-X: Rear Panel Features ..........................7
. AC Line Cord .............................................7
2. Power Switch ...........................................7
3. Signal Inputs ............................................ 7
4. /8" Stereo Input ......................................7
5. Powered Speaker Position Switch..........8
6. Wire Terminals (±) ...................................8
7. Custom-Tuned Rear Port .........................8
CR-X: Front Panel Features .........................8
8. Phone Output ...........................................8
9. Volume Knob ............................................8
Signature CR Series Sound
• Professional studio-quality sound
• Perfect upgrade for your desktop speakers
• Great for home studios, content creators,
gaming, listening to your favorite tunes,
and more
Plug and Play
• Choose which side of your desk gets
the volume knob with the convenient
speaker placement switch
• Convenient front panel volume knob with gives
you on/o/volume control
• Front-facing headphone jack auto-defeats
speaker output
• Flexible inputs – /4", /8", and RCA
Fresh Look
• Brushed metal front panel
• Distinct outlined design in CR Green
0. Running Man logo / LED ........................8
. Season Knob ...........................................8
Input Signal Wiring ......................................9
Care and Cleaning ........................................9
Appendix A: Service Information .............. 0
Appendix B: Technical Information .......... 2
CR-X Dimensions .......................................3
CR-X Block Diagram .................................. 4
Limited Warranty ....................................... 5
Included Accessories
• /8" to stereo RCA cable to connect computer
output to speakers
• /8" to /8" cable to connect a smartphone
or media player to rear panel of speakers
• Speaker-to-speaker cable
• Acoustic isolation pads [CR5-X]
CR8S-XBT 8" subwoofer with Bluetooth oers dedicated
bass reinforcement
• Perfect addition to any CR Series monitors
• Included CRDV Desktop Volume control
for easy control over the whole system
with separate subwoofer level
Like us
Part No. SW289 Rev. A 2/9
©2019 LOUD Audio, LLC. All Rights Reserved.
Follow us
Watch our dang videos
Owner’s Manual
3
Introduction
Getting Started
CR-X Series Creative Reference Multimedia Monitors
oer studio-quality sound with cosmetics that
compliment any desk whether you’re making music,
creating content, or just relaxing to your favorite tunes.
The sleek design of CR-X features a brushed metal
panel and a distinct outline that stands out.
Available in a vast range of sizes plus an 8" subwoofer
with Bluetooth, CR-X has the perfect match for your
needs. Upgrade your listening experience with Mackie
CR-X Creative Reference Multimedia Monitors.
CR-X Multimedia Monitors
How to Use This Manual:
Afer this introduction, a getting started guide will
help you get things set up fast. The hookup diagrams
show some typical setups, while the remaining
sections provide details of the CR3-X, CR4-X
and CR5-X monitors.
We realize that you can’t wait to hook up
your CR-X Multimedia Monitors and try them out.
Nevertheless, please take the time to read this page
NOW, and the rest can wait until you’re good and ready.
. Turn the volume control on the front of the powered
CR-X monitor down (fully counterclockwise) before
turning the unit on for the first time.
2. Set the power switch on the back panel o. This will
prevent you from accidentally connecting a hot signal
source to the monitor and getting a rude surprise.
3. Connect the line-level monitor signal from your
computer, mixer, or other signal source to the input
jacks on the rear panel of the monitor (/4", RCA
or /8").
4. Connect the black (–) and red (+) speaker wires
from the powered monitor’s ± spring clips to the
passive monitor’s ± spring clips.
5. Connect the axed line cord into an AC outlet.
The monitor may accept the appropriate voltage
as indicated on the back panel.
6. Turn the computer, mixer or other signal source on.
7. Turn on the power switch on the rear panel
of the CR-X monitor.
8. Turn the front panel volume control clockwise until
the monitor “clicks” on and the ring surrounding
the volume knob illuminates.
This icon marks information that is
critically important or unique to these
monitors. For your own good (and our
peace of mind), please read and remember
them. You will be quizzed later.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
9. Play an audio file and slowly turn the front panel
volume control to a comfortable listening level.
If you desire a more thorough walk-through
of your CR-X monitors, there is a wealth of information
in the following pages!
Additional Tidbits of Wisdom
• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2
for information on hearing protection.
• When you shut down your equipment, turn o
the monitors first to prevent thumps and other
noises generated by any upstream equipment
from coming out the speakers. When powering
up, turn on the monitors last.
• Save the sales receipt and original packaging in case
you ever need warranty service. See page 5
for details.
CR-X Multimedia Monitors
4
Hookup Diagrams
Owner’s Manual
CR3-X / CR4-X / CR5-X
The illustration above shows a typical use for CR-X Series Multimedia Monitors. Everyone needs tunes
while working, right... or is it just me?
In this example, simply connect the (included) cable from the computer’s /8" output jack to the L/R RCA inputs
of the powered CR-X Series Multimedia Monitor. If you prefer to use /4" inputs or /8" stereo input instead of RCA
inputs, those options are available, too.
Next we’ll want to connect the passive speaker. The included black (–) and red (+) speaker wires should
be connected from the powered monitor’s ± spring clips to the passive monitor’s ± spring clips as detailed
by the dotted lines above:
Connect black (–) to black (–) and red (+) to red (+).
Almost there! Move the ‘Powered Speaker Position Select’ switch to either the “L” or “R” position based on whether
the powered reference monitor – the one with the volume knob – will be on the lef or right side.
CR3-X / CR4-X / CR5-X
Now position the monitors where you would like them. Play audio through the computer, making sure
that the volume of the computer and monitors are above “0”.
Last step: move the monitors around until the optimal sound has been achieved and adjust volume to taste.
Optional (CR5-X): place the included acoustic isolation pads underneath the monitors to minimize boomy bass
build-up and provide up/down tilt control for more focused listening.
Owner’s Manual
5
Loading...