Page 1
COMPACT DESKTOP SPEAKERS
OWNER’S MANUAL
Page 2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Minimum distance (5 cm) around the apparatus for sucient ventilation.
9. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
10. No naked flame sources, such as lighted candles, should be placed
on the apparatus.
11. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
14. Unplug this apparatus during lightning storms or when unused
for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus,
CR2-X CUBE COMPACT DESKTOP SPEAKERS
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
16. This apparatus shall not be exposed to dripping or splashing, and no object filled
with liquids, such as vases or beer glasses, shall be placed on the apparatus.
17. Do not overload wall outlets and extension cords as this can result in a risk of fire
or electric shock.
18. Explanation of symbol, marking, signal lamp or similar means indicates
that the apparatus is completely disconnected from the mains.
19. WARNING: Please refer to the information on exterior bottom enclosure
for electrical and safety information before installing or operating the apparatus.
20. This device should be installed and operated with minimum distance
20cm between the radiator & your body.
21. Bluetooth transmitter Power: <0dBm
Bluetooth transmitter frequency range: 2400 – 2483.5 MHz
22. Operating Temperature: 0–45˚ C // 32–3˚ F
23. NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 5 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this device not expressly approved
by LOUD Audio, LLC. could void the user’s authority to operate the equipment
under FCC rules.
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (202/9/EU)
and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling
of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated
with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the eective usage of natural resources. For more information about
where you can drop o your waste equipment for recycling, please contact your local city oce, waste authority, or your household waste disposal service.
PORTABLE CART
WARNING
24. This apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations
of the Canadian Department of Communications.
Canada ICES-003(B)/NMB-003(B)
ATTENTION
— Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils
numériques de class B prescrites dans le réglement sur le brouillage
radioélectrique édicté par les ministere des communications du Canada.
25. This device complies with Part 5 of the FCC Rules [and contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s)]. Operation is subject
to the following two conditions:
() this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil
est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
() L’appareil ne doit pas produire de brouillage, et
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
26. Exposure to extremely high noise levels may cause permanent hearing loss.
Individuals vary considerably in susceptibility to noise-induced hearing loss,
but nearly everyone will lose some hearing if exposed to suciently intense
noise for a period of time. The U.S. Government’s Occupational Safety and Health
Administration (OSHA) has specified the permissible noise level exposures
shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits could
result in some hearing loss. To ensure against potentially dangerous exposure
to high sound pressure levels, it is recommended that all persons exposed
to equipment capable of producing high sound pressure levels use hearing
protectors while the equipment is in operation. Ear plugs or protectors
in the ear canals or over the ears must be worn when operating the equipment
in order to prevent permanent hearing loss if exposure is in excess of the limits
set forth here:
Duration, per
day in hours
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 00 Very loud classical music
.5 02
05 The dogs barking at the mailman
0.5 0
0.25 or less 5 Loudest parts at a rock concert
This equipment complies with FCC and ISED radiation
exposure limits set forth for an uncontrolled environment.
Este equipo cumple los límites de exposición a la radiación
de la FCC e ISED establecidos para un entorno no controlado.
CAUTION – These servicing instructions are for use by
qualified service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that contained
in the operating instructions unless you are qualified to do so.
Sound Level dBA,
Slow Response
Typical Example
CR2-X CUBE COMPACT DESKTOP SPEAKERS
2
Page 3
Contents Features
OWNER’S MANUAL
Important Safety Instructions ....................2
Contents .......................................................3
Features ........................................................3
Introduction .................................................4
Getting Started ............................................4
Hookup Diagrams ........................................5
CR2-X CUBE: Rear Panel Features .............7
. Power Connector ......................................7
2. Power Switch ...........................................7
3. To Sub ....................................................... 7
4. /8” Stereo Input Jack ............................7
5. USB ...........................................................7
6. RCA Connectors .......................................8
CR2-X CUBE: Side Panel Features ..............8
BMR driver technology for room-filling sound
Capacitive touch Volume and Mute controls
Compact design takes up minimal desk space
Three inputs – USB-C, 1/8" Aux, and Bluetooth® 5.0
Subwoofer output with jack detection
Subwoofer crossover mode
Headphone output
7. Phones Output ..........................................8
CR2-X CUBE: Top Panel Features ...............9
8. Input Selector Switch and LEDs .............9
9. Volume ......................................................9
Bluetooth Connection ..................................9
Appendix A: Service Information .............. 0
Appendix B: Technical Information ...........
CR2-X CUBE Dimensions............................
Limited Warranty ....................................... 2
Part No. SW403 Rev. A 0/22
©2022 LOUD Audio, LLC. Alright Alright All Rights Reserved.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
OWNER’S MANUAL
3
Page 4
Introduction
Getting Started
Small size doesn’t have to mean small sound.
CR2-X Cube desktop speakers with powerful
BMR driver technology deliver unbelievably clear,
room-filling sound from a compact footprint.
And with a host of connectivity options, they are
perfect for any desk no matter how you need to get your
audio to them. Go digital via USB, keep it analog with
the Aux input, or eliminate the wires via Bluetooth®.
Built-in touch control oers a sleek look
while providing easy volume adjustment and mute
activation. And with the integrated headphone output,
you can keep it a bit more private by simply plugging
in your favorite headphones or earbuds.
If you want more bass, the built-in subwoofer
output makes it easy to connect, plus it will optimize
the system to work beautifully with the matching
CR6S-X or any other sub.
Get the sound you want without the bulk
with CR2-X Cube.
CR2-X CUBE COMPACT DESKTOP SPEAKERS
We realize that you can’t wait to hook up your
CR2-X CUBE and try it out. Nevertheless, please take
the time to read this page NOW, and the rest can wait
until you’re good and ready.
. Make all initial connections with the power switches
OFF on all equipment.
2. Connect the black (–) and red (+) RCA cables
from the active speaker’s ± RCA connectors
to the passive speaker’s ± RCA connectors.
3. Push the included line cord securely into the CR2-X
Cube’s power connector and plug the other end
into an AC outlet.
4. Connect the line-level monitor signal from
your computer or other line-level signal
source to the input jacks (USB-C or /8").
...AND / OR...
...Connect your device via Bluetooth
[instructions on page 9]...
5. Power up the CR2-X CUBE. [Rear panel power switch].
6. Confirm that the input selector switch has the correct
input selected.
7. Be sure that the volume of the input is the same
as it would be during normal use.
How to Use This Manual:
Afer this introduction, a getting started guide will
help you get things set up fast. The hookup diagrams
show some typical setups, while the remaining
sections provide details of the CR2-X CUBE.
This icon marks information that
is critically important or unique
to the CR2-X CUBE. For your own
good (and our peace of mind), please
read and remember them. You will be
quizzed later.
There’s an illustration of a microscope,
so, of course, you’re going to get more
detailed information when you see this
little guy. There are explanations of
features and practical tips listed here.
It’s a good idea to pay attention to text
displayed next to a note icon, as this icon
draws attention to certain features
and functions relating to the usage
of the CR2-X CUBE.
8. Play an audio file and slowly raise the input and output
volumes to a comfortable listening level.
If you desire a more thorough walk-through
of the CR2-X CUBE, there is a wealth of information
in the following pages!
Additional Tidbits of Wisdom
• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2
for information on hearing protection.
• Save the sales receipt and original packaging
in case you ever need warranty service.
CR2-X CUBE COMPACT DESKTOP SPEAKERS
4
Page 5
Hookup Diagrams
OWNER’S MANUAL
This is a typical use for CR2-X CUBE. This would be a prime example of utilizing it to play music.
First, make sure the CR2-X CUBE is positioned for your setup. Next, connect RCA cables from
the active speaker to the passive speaker.
Here a phone is connected to CR2-X CUBE via Bluetooth, although it can also be “hardwired”
into the /8" stereo input jack using an /8" to /8" cable. Both options are on display here.
Next, make sure that the input selector switch is set to either Bluetooth or /8" / Aux, depending
on how the phone is connected, of course.
Now play audio through the phone, making sure that the volume of the phone and CR2-X CUBE are above “0”.
Once you hear audio, simply adjust volume to taste!
Optional: Is there someone who doesn’t like what you’re listening to? Well, first o, they’re wrong. That’s a given.
There is a solution, though. Plugging a pair of Mackie headphones into the /8" headphones jack auto-defeats
the speaker output. The volume slider then controls the level going to the phones.
Music Playback
OWNER’S MANUAL
5
Page 6
Hookup Diagrams continued...
CR2-X CUBE COMPACT DESKTOP SPEAKERS
The illustration above shows another typical use for CR2-X CUBE. This would be a prime example of utilizing
it for gaming. First, make sure the CR2-X CUBE is positioned for your setup. Next, connect RCA cables from
the active speaker to the passive speaker.
A gaming computer is connected to CR2-X CUBE utilizing a USB-C to USB-A cable.
Next, make sure that the input selector switch is set to USB. Don’t forget to change the output
to ‘CR2-X CUBE’ via Settings on your computer
Now play audio through the computer, making sure that the volume of the computer and CR2-X CUBE
are above “0”. Once you hear audio, simply adjust volume to taste!
Optional: As shown above, a CR6S-X subwoofer is connected to the CR2-X CUBE’s /8" TO SUB output jack.
Just imagine what your games and movies would sound like with one of these setups. Now stop imagining
and go dial it up!
Optional: Plugging a pair of Mackie headphones into the /8" headphones jack auto-defeats the speaker output.
The volume slider then controls the level going to the phones.
Gaming, Movies and More!
CR2-X CUBE COMPACT DESKTOP SPEAKERS
6
Page 7
CR2-X CUBE: Rear Panel Features
6 6
2
OWNER’S MANUAL
1
. Power Connector
CR2-X CUBE has a universal external power supply
that accepts any AC voltage ranging from 00 VAC
to 240 VAC. No need for voltage select switches.
It will work virtually anywhere in the world.
That’s why we call it a “Planet Earth” power supply!
It is less susceptible to voltage sags or spikes compared
to conventional power supplies, and provides greater
electromagnetic isolation and better protection
against AC line noise.
Attach the AC connector (the smaller, shorter
cable that plugs into the wall) to the power supply
adapter (the bigger, longer cable that plugs into
the CR2-X CUBE).
The power supply adapter may be connected
to the CR2-X CUBE by pushing it into the power
receptacle on the rear panel and plugging the other
end into a live AC outlet. The LED on the power supply
will illuminate blue to indicate that it is receiving power.
Only use the factory-authorized power
supply that came with the CR2-X CUBE.
35 4
3. To Sub
Not much of a surprise here, as we would like you
to connect this output to the input of a subwoofer
using an /8" connector.
When connected, the CR2-X CUBE
automatically shifs to sub mode, resulting
in a roll-o of the low frequencies.
Of course, we would highly recommend the CR6S-X or
CR8S-XBT subwoofer; see the hookup diagram on page
6 and check the Mackie website for more information!
4. /8" Stereo Input Jack
Connect a line-level signal from a smartphone,
MP3 player or other signal source to this input jack
using an unbalanced /8" connector.
It is wired as follows, according to standards
specified by the AES (Audio Engineering Society):
2. Power Switch
Press the top side of this rocker switch inwards
to turn on the CR2-X CUBE. The front panel LED
(of the active speaker) will illuminate green, confirming
success. Additionally, it will state, “Power on. Bluetooth
pairing mode.” Press the bottom side of this rocker
switch inwards to turn it o.
Stereo /8" TRS
Sleeve = Shield (Ground)
Tip = Lef Channel
Ring = Right Channel
5. USB
Since the CR2-X CUBE are “Compact Desktop
Speakers,” the USB connection will (most likely)
be one of the most widely used features. In short,
it works as an interface that allows audio to stream
from the CR2-X CUBE via computer.
This is the connection that will be used for gaming,
watching movies and fun cat videos, playing music
or just about any other sound that is emitted from
your computer.
OWNER’S MANUAL
7
Page 8
CR2-X CUBE: Rear Panel
Features Continued...
Connect the USB-C side of a USB cable
to the CR2-X CUBE and the USB-A side
to the computer’s USB port.
Don’t forget to change the output to ‘CR2-X CUBE’
via Settings on your computer.
CR2-X CUBE’s USB connection is audio only.
It is not a source of power.
6. RCA Connectors (±)
Connect the black (–) and red (+) RCA cables from
the active speaker’s ± RCA connectors to the passive
speaker’s ± RCA connectors.
CR2-X CUBE: Side Panel Features
7
CR2-X CUBE COMPACT DESKTOP SPEAKERS
7. Phones Output
This /8" TRS connector supplies the output to stereo
headphones. The volume is controlled with the volume
slider. The signal to the power amp is killed when
headphones are connected.
The phones output is wired as follows, according
to standards specified by the AES (Audio Engineering
Society):
Stereo /8" TRS
Sleeve = Shield (Ground)
Tip = Lef Channel
Ring = Right Channel
Warning: The headphone amp is loud
and could cause permanent hearing
damage. Even intermediate levels may
be painfully loud with some headphones.
BE CAREFUL! Always turn the volume all the way down
before connecting headphones. Then turn it up slowly
as you listen carefully.
CR2-X CUBE COMPACT DESKTOP SPEAKERS
8
Page 9
CR2-X CUBE: Top Panel Features
The features listed below are laid out horizontally
on the right (active) speaker underneath the speaker,
but above the power LED.
8. Input Selector Switch and LEDs
This is a momentary switch that cycles between
the three input choices: USB, /8" and Bluetooth.
Simply press this switch to cycle between the input
selections. Each input selection is accompanied by a
dierent colored LED.
• USB [Purple] – More information on page 7.
• /8" / Aux [Amber] – More information on page 7.
• Bluetooth [Cyan] – More information on page 9.
All inputs may be connected
simultaneously, but only one input may
be selected at a time. There are no issues
when switching between sources.
This includes a device connected via Bluetooth.
Switching the source selection away from a connected
device (Bluetooth) to USB or /8" / Aux and back again
will not disrupt the Bluetooth connection, for example.
OWNER’S MANUAL
Bluetooth Connection
Upon powering up the CR2-X CUBE, the Bluetooth
function is either:
() In sleep mode. See ‘Pairing and connecting
for the first time’ or...
(2) ...Paired and connected. See ‘Previously paired
and connected devices’.
Pairing and connecting for the first time:
Start by changing the input selector switch
to Bluetooth. The accompanying LED will illuminate
and flash cyan while in pairing mode. Additionally,
a voice prompt announces “Bluetooth pairing mode”.
[The LED will continue to flash until it has successfully
paired and connected].
While CR2-X CUBE is in pairing mode, simultaneously
scan for Bluetooth devices on the device. You should
see ‘CR2-X CUBE’ appear in the list of “available
devices”. Select it by tapping it. From there, your
Bluetooth device should indicate that it is successfully
connected, a confirmation voice prompt announces,
“connected” and the Bluetooth button will stop flashing
and remain solid cyan. If it does not, start the pairing
process again, and make sure that the CR2-X CUBE
and device are both in pairing mode at the same time.
Regardless of the currently selected input,
when turning it o and on again, the CR2-X
CUBE will always start by trying to pair – or
successfully pairing – to Bluetooth.
See the following page for instructions.
9 8
9. Volume
Tap or slide your finger in this indented volume bar
to adjust the overall output level. The lef side is quieter
and right side is louder. The accompanying LEDs will
illuminate white to display the volume level. Tapping
(or sliding to) the far lef side will mute the output.
It would then be a single red LED.
Previously paired and connected devices:
The Bluetooth connection will disconnect if it’s out
of range. Previously paired and connected devices will
automatically reconnect when back within range.
Additionally, it will automatically search and connect
to remembered devices in range upon powering up.
To drop the device from being paired
with the CR2-X CUBE, press and hold
the Bluetooth button down for at least
three seconds. A voice prompt announces
“Bluetooth disconnected”.
The Bluetooth may disconnect when aected
by Electrostatic Discharge [ESD]. Manually
reconnect the Bluetooth connection.
Make sure that the signal level from the
mixer, MP3 player, phone (or whatever
device immediately precedes the CR2-X
CUBE) is loud enough to produce sound.
However, the computer’s signal and CR2-X CUBE
volume levels are “tied” to each other.
OWNER’S MANUAL
9
Page 10
Appendix A: Service Information
If you think your
check out the following troubleshooting tips and do your
best to confirm the problem. Visit the Support section
of our website (www.mackie.com/support) where
you will find lots of useful information such as FAQs
and other documentation. You may find the answer to
the problem without having to part with your
CR2-X CUBE has a problem, please
CR2-X CUBE.
Troubleshooting
No power
• Make sure the power cord is plugged all the way into
the AC outlet.
• Our favorite question: Is it plugged in? Make sure
the AC outlet is live [check with a tester or lamp].
• The internal AC line fuse may be blown. This is not
a user serviceable part. If you suspect the AC line
fuse is blown, please see the "Repair" section next.
No sound
• Is the level for the input source turned all the way
down? Verify that all the volume controls in the system
CR2-X CUBE COMPACT DESKTOP SPEAKERS
are properly adjusted.
• Is the signal source turned up? Make sure the signal
level from the computer, mixer, MP3 player, phone
(or whatever device immediately precedes
the
Poor sound
overdriving a stage in the signal chain. Verify that
all level controls are set properly.
the jacks? Be sure all connections are secure.
plugged into the preamp stage. If it sounds bad there,
it’s not the
CR2-X CUBE) is high enough to produce sound.
• Is it loud and distorted? Make sure that you’re not
• Are the input connectors plugged completely into
• If possible, listen to the signal source with headphones
CR2-X CUBE.
Noise / Hum / Buzz
• Check the signal cable between the computer/mixer/
MP3 player/phone and the
sure all connections are secure. These problems
usually produce crackling noises, hum, or buzz.
• Make sure the signal cable is not routed near AC
cables, power transformers, or other EMI sources
(including wall warts and line lumps!). These sources
usually produce hum.
• Is there a light dimmer or other triac-based device
on the same AC circuit as the
Dimmers cause buzzing noises. Use an AC line
filter or plug the monitor into a dierent AC circuit.
• Excessive hiss is an indication of an incorrect gain
setting somewhere before the speaker.
• If possible, listen to the signal source with headphones
plugged in. If it sounds noisy there, it’s not the
CR2-X CUBE.
• Try disconnecting the cable connected to the input
jack. If the noise disappears, it could be a “ground
loop,” rather than a problem with the
Try some of the following troubleshooting ideas:
• Use balanced connections throughout your
system for the best noise rejection.
• Whenever possible, plug all the audio
equipment’s line cords into outlets which share
a common ground. The distance between
the outlets and the common ground should
be as short as possible.
CR2-X CUBE. Make
CR2-X CUBE?
CR2-X CUBE.
Bluetooth or Other Issues
• Please email or call Technical Support if you are
having Bluetooth or any other issue not listed here:
o mackie.com/support-contact
o -800-898-32
Repair
• Too much bass or not enough bass? The first
(and easiest) suggestion is to switch between
EQ modes to see if that solves the issue. If not,
move around the room and see if the bass response
changes. It’s possible your listening position coincides
with a room mode where the low frequencies either
become exaggerated or nulled. If so, try moving
the
your listening position.
10
CR2-X CUBE to a dierent position, or moving
CR2-X CUBE COMPACT DESKTOP SPEAKERS
For warranty service, refer to the warranty information
on page 2.
Non-warranty service is available at a factory-authorized
service center. To locate the nearest service center,
visit www.mackie.com/support/service-locator. Service
CR2-X CUBE living outside the United States
for a
may be obtained through local dealers or distributors.
If you do not have access to our website, please call
our Tech Support department at -800-898-32 (normal
business hours, Pacific Time), to explain the problem.
They will tell you where the nearest factory-authorized
service center is located in your area.
Page 11
Appendix B: Technical Information
CR2-X CUBE Specifications
OWNER’S MANUAL
Acoustic Performance
Frequency Response (-0 dB) 58 Hz – 20 kHz
Horizontal Coverage Angle 80º
Vertical Coverage Angle 80º
Maximum SPL Peak 03 dB
Dynamic Range ≥90 dB
Signal-to-Noise Ratio ≥90 dB
Monitor Angle 5˚
Transducers
High Frequency 2x 3.25 in / 83 mm BMR Drivers
Amplifiers
Rated Power 60 watts peak
Design Class D
Input / Output
Input Type /8" / USB-C / Bluetooth
Output Type /8" Stereo Headphones
/8" Stereo TRS (To Sub)
Bluetooth Information
Bluetooth Protocol 5.0
Bluetooth Function Audio Streaming
Power Requirements
CR2-X CUBE 24Vdc, 2.7A
Construction Features
Display LEDs Front panel power LED
Volume level
Operating Temperature 0 – 45 ˚C
32 – 3 ˚F
Physical Properties
Height: 6.4 in / 63 mm
Width: 4.7 in / 9 mm
Depth: 6.0 in / 52 mm
Weight: 6.3 lb / 2.9 kg
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©2022 LOUD Audio, LLC.
All Rights Reserved.
Bit Depth / Sample Rate
Bit Depth 6-bit
Sample Rate 48 kHz
CR2-X CUBE Dimensions
6.0 in / 152 mm4.7 in / 119 mm
6.4 in
163 mm
WEIGHT
6.3 lb
2.9 kg
OWNER’S MANUAL
11
Page 12
Limited Warranty
Please keep your sales receipt in a safe place.
This Limited Product Warranty (“Product Warranty”) is provided by LOUD Audio, LLC (“LOUD”) and is applicable to products
purchased in the United States or Canada through a LOUD-authorized reseller or dealer. The Product Warranty will not extend
to anyone other than the original purchaser of the product (hereinafer, “Customer,” “you” or “your”).
For products purchased outside the U.S. or Canada, please visit www.mackie.com to find contact information for your local
distributor, and information on any warranty coverage provided by the distributor in your local market.
LOUD warrants to Customer that the product will be free from defects in materials and workmanship under normal use
during the Warranty Period. If the product fails to conform to the warranty then LOUD or its authorized service representative
will at its option, either repair or replace any such nonconforming product, provided that Customer gives notice of the
noncompliance within the Warranty Period to the Company at: www.mackie.com or by calling LOUD technical support
at .800.898.32 (toll-free in the U.S. and Canada) during normal business hours Pacific Time, excluding weekends
or LOUD holidays. Please retain the original dated sales receipt as evidence of the date of purchase. You will need it
to obtain any warranty service.
For full terms and conditions, as well as the specific duration of the Warranty for this product, please visit www.mackie.com.
The Product Warranty, together with your invoice or receipt, and the terms and conditions located at www.mackie.com
constitutes the entire agreement, and supersedes any and all prior agreements between LOUD and Customer related
to the subject matter hereof. No amendment, modification or waiver of any of the provisions of this Product Warranty
CR2-X CUBE COMPACT DESKTOP SPEAKERS
will be valid unless set forth in a written instrument signed by the party to be bound thereby.
12
Need help with the CR2-X CUBE?
• Visit www.mackie.com/support to find: FAQs, manuals, addendums, and other documents.
• Email us at: www.mackie.com/support-contact
• Telephone 1-800-898-3211 to speak with one of our splendid technical support chaps
(Monday through Friday, normal business hours, Pacific Time).
CR2-X CUBE COMPACT DESKTOP SPEAKERS
Page 13
9820 North Creek Parkway #20
Bothell, WA 980 • USA
Phone: 425.487.4333
Toll-free: 800.898.32
Fax: 425.487.4337
www.mackie.com
Loading...