Lucent Technologies MRT-36H User Manual

Stinger®MRT-36H

DSL Access Concentrator

Using SHDSL technology, this micro-remote terminal (MRT) allows you to
deliver business-class broadband services cost effectively to the widest
range of subscribers. The Stinger

®

MRT-36H offers a highly compact
design with a built-in ATM switch, an environmentally hardened chassis,
simple installation and uncomplicated integration into existing DSL
installations. As a result, it’s easy to deploy in any indoor or outdoor
location. So you have the ATM power, QoS and traffic management
capabilities needed to extend high-value broadband services to
underserved communities—and generate increased revenues.

Applications

• Business-class data services that
benefit from symmetric high­speed transport

• Fast Internet access,
telecommuting and leased line
replacements for SOHOs and small
to medium-sized businesses

• Existing outdoor plant solutions in
any region, as well as in-building
installations like hotels and Multi­Dwelling Units

• Facilities with limited space or
conservative budgets

Features

• Compact design with high port

density

—Supports up to 36 SHDSL

ports in a 19-inch by 1RU unit

• Symmetric transport speeds—
Provides high-speed data transport
upstream, as well as downstream—
at rates up to 2320 Kbps

• Built-in high-performance ATM

switching

—Delivers the power
required for advanced broadband
services

• OC3c/STM-1, DS3 and T1/E1 IMA

uplinks

—Allows easy integration

into existing networks

• ATM Quality of Service—Provides
the performance and reliability you
need to offer high-value services,
backed by SLAs

• Broad service support—Enables a
full spectrum of carrier-class data
and multimedia services to meet
subscriber demand

• Environmentally hardened—
Operates in any outdoor or indoor
facility where temperatures range
from –40C degrees to 65C degrees

• Flexible deployment—Allows simple
installation in either 19- or 23-inch
racks, using mounting brackets

• Optional pre-packaged electronic

enclosures

—Satisfies rigorous
standards and challenging
environmental conditions

• Lucent’s Navis

®

management

system

—Simplifies network
management, maintenance and
service provisioning

• Lucent’s CellPipe

®

DSL modems—

Offer an ideal, cost-effective CPE
solution with integrated bridge and
routing capabilities

Benefits

• Expanded service area—Easy
deployment makes it easier to
reach underserved subscribers

• Lower implementation costs—With
its high-density, flexible design, the
Stinger®MRT-36H reduces the
expense of adding new services
and subscribers

• Enhanced profitability—Generate
additional revenues by extending
high-value broadband services to a
wider customer base

• Competitive edge—Take advantage
of high-speed symmetric DSL,
along with ATM reliability, to offer
advanced broadband services to
your business customers

• Economical service delivery—
Compact size, low per-port pricing
and simple installation help you
reach previously cost-prohibitive
markets

• Seamless upgrade—You can add
new capabilities easily to support
emerging broadband applications

• Easy expansion—As your subscriber
base increases, simply cascade
other Stinger®MRT products like
the Stinger®MRT-48A

To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our web
site at www.lucent.com.

This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.

Stinger, NAVIS and CellPipe are registered
trademarks of Lucent Technologies, Inc.

Copyright © 2003
Lucent Technologies Inc.
All rights reserved

STG v1.0503

Technical Specifications

1.Electrical Specifications

Power requirements:

Power consumption:
48 VDC @140 Watts

Inrush: All modules have inrush
limiting circuits

DC power source fuse: 5A

2.Physical Specifications

Overall chassis size: 1.75 in (4.4 cm or
1U) high x 17.4 in (44.2 cm) wide x

9.45 in (24.0 cm) deep
Fits in 19 in. rack, supports ETSI

requirements
Unit Weight:11 lbs (5 kg) maximum
Standard EIA, ETSI and 23” mounting
Rack brackets included; optional

brackets for vertical mounting or wall
mounting available

3.Card slot

One for trunk module

4.Trunk Physical Interfaces

Dual-port OC3c/STM-1 single mode
optical SC connector; Dual-port DS3
coaxial (BNC connectors as per ANSI
T1.404); Four- or eight-port T1/E1
RJ48 jack

5.Line Interfaces

Two 50-pin RJ21 connectors for up to
36 SHDSL subscriber lines. First
connector provides access to 24 SHDSL
lines. Second connector provides access
to the remaining 12 SHDSL lines.

6.Other Hardware Interfaces

Two STS-3 electrical cascading interfaces;
10BaseT Ethernet interface; DB9 RS232
console port interface; DB15 interface
for 2 alarm outputs and 4 alarm relay
inputs (1 alarm relay input is dedicated
for detection of loss of AC power);
Two pin BITS connector

7.Status Indicators

Port Status – One 7 segment display with
10 LEDs; Two alarm indicator LEDs;
Ethernet Line Link and Activity Indicators;
Trunk status – On and Activity Indicators

8.Operating Environment

Operating temperature:

-40°C to 65°C (-40°F to 149°F)
Relative humidity:

10% – 95% (non-condensing)
Operating altitude:

up to 13,123 ft (4,000 m)

9.Protocol Specifications

ATM Forum UNI (v.3.0 and v.3.1); ATM
Forum Traffic Management v.4.0

10.Certification

NEBS 1-3; Telcordia GR-63-CORE;
Telcordia GR-1089-CORE

11.Electromagnetic Compatibility

FCC Part 15 Class A; EN55022 Class A;
AS/NZS3548 Class A; VCCI Class A;
CISPR 22 Class A; EN 300386-2; CE/RTTE

12.Safety

UL 1950; CSA 22.2-950; EN/IEC 60950;
CB-Scheme

13.SHDSL Interface Standards

ITU G.991.2 (G.shdsl); Annex A (typical
North America) and Annex B (typ. Europe)
ETSI TS 101 524; ITU G.994.1 (G.hs); ITU
G.997.1 (physical layer management)

14.SHDSL Performance

Multi-rate up to 2320 Kbps symmetric
bandwidth in 2-wire operation.

Multi-rate up to 4.640 Mbps symmetric
bandwidth in 4-wire operation.

15.OC3c/STM-1 Interface Standards

ITU G.957; ITU G.709 (optical);
ATM Forum UNI v3.0 and v3.1;
ANSI T1M1.3/92-005R1; Telcordia
TR-NWT-001112; Telcordia GR­253-CORE; RFC SONET 1595

16.Optical Specifications

155.52 Mbps per port
Single mode laser optics
Nominal wavelength: 1310 nm
Standard reach: 15km maximum
Transmit power: -8 dBm maximum, -15

dBm minimum
Receive sensitivity: -31 dBm maximum,

as per ITU-T recommendation G.958

17.DS3 Interface Standards

DS3 operates @ 44.736 Mbps per port;
DS3 ports support C-bit/M-framing; PLCP
per TR-TSY-000773 and direct cell
mapping per G.804; ANSI T1E1.1/94­002R1; T1.107; T1.107a; T1.403; Telcordia
TR.NWT-00082I; ITU G.804; RFC 1407;
TR54014 (AT&T ACCUNET T45 and T45R)

18.T1/E1 Interface Standards

ANSI T1.408 Issue 1; T1E1.4/99-006R6;
ITU I.432; ITU G.703; ITU G.704; ITU
G.804; ATM Forum IMA v1.0 and v1.1;
ATM Forum UNI v3.0 and v3.1; ATM
Forum IMA MIB; RFC1406 MIB

19.T1/E1 Performance

1.544 Mbps full duplex per T1 port,
Up to 12.352 Mbps for T1 IMA; 2.048
Mbps full duplex per E1 port, Up to

16.384 Mbps for E1 IMA; 20.T1/E1
Transmission Output impedance: T1 – 100
ohms, E1 – 120 ohms; Line build out:
T1 – 0 to 22.5 db; Receive sensitivity:
T1 – 0 to 36 db, E1 – 0 to 43 db

20.Model Numbers

MRT19-SL-36: Stinger

®

MRT 19” complete

chassis model with 36 SHDSL ports
MRT19-AD-48: Stinger

®

MRT 19”
complete chassis model with 48 ADSL
ports and no splitters

MRT-AD-36S: Stinger

®

MRT 23”
complete chassis model with 36 ADSL
ports and integrated splitters

*MRT- AD-36S-4T1: Complete chassis

model with 4-T1 ports

*MRT-AD-36S-8T1: Complete chassis

model with 8-T1 ports

*MRT-AD-36S-4E1: Complete chassis

model with 4-E1 ports

*MRT-AD-36S-8E1: Complete chassis

model with 8-E1 ports

MRT-AD-36S-2OC3: Complete chassis
model with 2-OC-3c ports

MRT-AD-36S-2DS3: Complete chassis
model with 2-DS3 ports

*IMA models also available.