Project: _____________________
Drop-In Pass-Thru Display Refrigerator
Updated
Design!
length
❑ CSDR-DI-42 P 42
❑ CSDR-DI-42 S 42
❑ CSDR-DI-60 P 60 1/4”
❑ CSDR-DI-60 S 60 1/4”
Standard Features
✔ Self-closing doors (front & back)
✔ Digital solid-state temperature control
✔ Door Locks
✔ 4 Heavy duty stainless steel shelves
✔ 4 recessed interior LED lights
✔ Self-contained refrigeration system
✔ Double service design (suffix P)
Optional Features
Item: _______________________
Quantity: ___________________
Drop-In Models
1
/4”
1
/4”
(specify)
Benefits:
Seamless welded stainless
steel construction
Easy to load
Large capacity
General Specifications
Refrigeration system to be 1/2 HP
air-cooled, hermetically sealed condensing unit fully connected and tested,
ready to plug in.
It shall be mounted on a channel base,
and system will include 2 each16”x16”
louvered access panels of 18 gauge
stainless steel. Louvered panels must
www.lowtempind.com • colorpoint@lowtempind.com
Adjustable shelves
Interior lights provide
product visability
Powder coated to match
your décor
(see options)
be installed in base unit (by others)
to allow straight-through air flow.
NOTE: Cut-out opening must be
reinforced to support the weight of
display refrigerator and product load.
Body To be fully insulated with a
seamless 16 gauge stainless steel,
welded, ground and polished
exterior.
P.O. Box 795 • Jonesboro, GA 30237
Tel: 770.478.8803 • Fax: 770.471.3715
❑ Single service (suffix S)
❑ Glass or mirror inside back
(single service only)
❑ Remote refrigeration system
❑ Lighted signs and graphics
(specify) _____________________
❑ Powder coated exterior
(specify) _____________________
Interior to be a 20 gauge welded
stainless steel liner, and to contain 4
recessed LED lights.
Doors Insulated, self-closing glass
doors front and back (except on single
service units) with plunger style locks,
and to include 4 stainless steel wire
shelves mounted on stainless steel
pilasters and clips.
U.L. SanitationClassified to NSF Standards