
®
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.comtechsupport@louroe.com
DESCRIPTION
Model SA-1A is a sound activated switch used in
conjunction with the LOUROE ASK-4 #101 Audio
Monitoring System or any of the AP Series non-alarming
base stations. Usually located near the base station, the
SA-1A provides a variable threshold level control that
activates the microphone when that level is exceeded by a
sound. In addition, it has 2 sets of relay contacts that
automatically close when the threshold level is exceeded.
This can be used to activate a camera, light or other
annunciation. Automatic re-set is adjustable between 0.5
and 60 seconds. An alarm LED is illuminated during
activation time. 12 Vdc Power is required.
®
APPLICATION
Unattended Facilities
Entry Gates
Therapy Labs Stables
Warehouses
Remote Locations
SA-1A
SOUND ACTIVATED SWITCH
TECHNICAL DATA SHEET
AD-1 POWER SUPPLY
(2) RCA SINGLE CABLES
FEATURES
SA-1A
IMPORTANT NOTICE
When this equipment is used as part of an
audio monitoring system, the law requires
that the public be given notice of AUDIO
MONITORING ON THE PREMISES. A
deca l noti ce is included with each
microphone shipped.
Federal Law References:
Federal Regulations, US Code, Title 18.
Crime and Criminal Procedure, Sec 2510.
AUDIO
MONITORING
On
These Premises
®
WIRING REQUIREMENTS
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
West Penn 452 or equivalent
Adjustable threshold level control
Two relay contacts for activating cameras,
lights, machinery, etc.
Adjustable re-set from 0.5 to 60 seconds
Alarm LED indicator
Automatic electronic switch to pass audio to
base station
Receptacle for 12 Vdc power
SPECIFICATIONS
Current drain
Audio input impedance
Relay contact
DC input
Relay latch time
Dimensions
Weight
Shipping Weight
U
R
T
E
C
D
A
F
U
N
A
M
70 mA
10KW
5A @ 277 Vac or 5A @ 30Vdc
12Vdc, 500mA
0.5 to 60 seconds
6 1/8”L x 4 5/8”W x 1 7/8”H
7 oz
1lb
I
N
T
H
E
SA-1A_specs 3/15